6GK1704-1LW00-3AE1

Цена на сайте указана розничная в ЕВРО без учета НДС.
Для уточнения цены и размера предоставляемой скидки - звоните или присылайте заявки

• Connection of SIMATIC S7-400 to Industrial Ethernet
  
  • 2 x RJ45 interface for 10/100 Mbit/s full/half-duplex connection with auto-sensing/auto-negotiation and auto-crossover function
  • Integrated real-time switch ERTEC with two ports
  • Multi-protocol operation for ISO, TCP/IP, UDP and PROFINET IO protocols
  • Adjustable Keep Alive function
• Communications services:
  • Open communication (ISO, TCP/IP, and UDP)
  • PROFINET IO Controller with real-time properties RT and IRT
  • PG/OP communication: Cross-network by means of S7 routing
  • S7 communication
• Media redundancy (MRP);
  the CP supports the media redundancy procedure MRP within an Ethernet network with ring topology.
• Multicast for UDP
• Access protection via configurable access list
• Support for fail-safe programmable controllers together with SIMATIC S7-400 CPU 416F-3PN/DP
• Module replacement without PG
• Operation in the SIMATIC H system for redundant S7-communication
• Configuration with STEP 7
• Diagnostics possibilities in STEP 7 and via web browser
• Automatic CPU-clock setting via Industrial Ethernet with NTP or SIMATIC procedure
• Integration of network management systems via SNMP (MIB II diagnostic information)

Note:

SIPLUS extreme products are based on SIMATIC standard products. The contents listed here were taken from the respective standard products. SIPLUS extreme specific information was added.

Technical documentation on SIPLUS can be found here:
http://www.siemens.de/siplus-extreme