SINUMERIK Integrate Create MyHMI /3GL

The SINUMERIK Integrate Create MyHMI /3GL programming package allows users to develop high-level language applications in programming language Qt/C++ for the SINUMERIK Operate user interface. A C++ or Microsoft .NET-based communication interface is also provided so that users can create a customized user interface with individual look & feel.

• Integration of single or multiple operating screens as well as user-defined operating areas in SINUMERIK Operate with NCU and PCU.
• Independently executable user interfaces
• Support for C++ or .NET interfaces

The respective software version of the SINUMERIK Integrate Create MyHMI /3GL programming package for SINUMERIK Operate is required for user development of applications.

Example:
SINUMERIK Operate software version 4.4 requires SINUMERIK Integrate Create MyHMI /3GL 4.4.

SINUMERIK Integrate Create MyHMI /WinCC

The graphics-based SIMATIC WinCC Advanced engineering tool is used as the basis the configuration of user interfaces. This means that customized screens can be created that will execute on SIMATIC Panels as well as on PC systems.

SINUMERIK Integrate Create MyHMI /WinCC is required in addition to SIMATIC WinCC Advanced for creating user interfaces with access to NCU data and for using the special SINUMERIK HMI function (select parts program).

With SINUMERIK Integrate Create MyHMI /WinCC, any skilled worker with basic technical experience is capable of creating technology-related modules for operating and visualizing without the need for high-level language expertise.

SIMATIC WinCC Runtime Advanced is included in the scope of supply of SINUMERIK Integrate Create MyHMI /WinCC. The SIMATIC WinCC Advanced Engineering System must be ordered separately, as required. For further information, refer to Catalogs ST 80/ST PC or the Siemens Industry Mall.

http://www.siemens.com/industrymall

For communication with a SINUMERIK NCU, depending on the system, Panel or PC used, the software option SINUMERIK Integrate Run MyHMI /SIMATIC OP or SINUMERIK Integrate Run MyHMI /WinCC is required (see Run-it! Run MyHMI).