SinuCom NC

The SinuCom NC program facilitates commissioning of control systems by providing:

• Dialog-based parameterization of machine data
• Administration of data for series start-up
• Integrated online help for functions, machine data and alarms
• Functional description in German and English as PDF (part of the online Help)

SinuCom Trace

The SinuCom NC Trace function permits the dynamic recording of CNC, PLC and HMI variables and of drive signals that are available via the CNC. These variables can be displayed, printed out or stored in a file, similar to using an oscillograph or logic analyzer. The SinuCom NC Trace function helps with:

• Fault detection and fault correction
• Machine performance analysis, benchmarking and tuning
• Process performance analysis, benchmarking and tuning

Preconditions:

• HMI-Advanced, version 6.3.15 or higher (variables of the CNC, PLC, HMI and drive)
• HMI-Advanced, software version 7.1 or higher
• Mouse

SinuCom NC SI

The SinuCom NC SI function supports the machine manufacturer in automating the Safety Integrated acceptance test, and optimizes the process:

• Verification of machines according to the EC Machinery Directive
• Testing of safety functions (partly automated) during the machine acceptance
• Logging of measured data and test results incl. trace functions records
• Testing of single/special-purpose machines, machine components (as a partial test) and series machines as a series commissioning process
• Faster commissioning because, in the new acceptance mode, power-on alarms during the acceptance test are acknowledged by RESET
• Simple operator control using prompted sequences
• Automatic configuration of the trace functions
• Unambiguous quality verification for equipment manufacturers and final customers, and for dealings with government agencies

Preconditions:

• HMI-Advanced software version 6.3.15 or higher
• HMI-Advanced software version 7.1 or higher
• Mouse

SinuCom NC FFS

The SinuCom FFS program is used to generate an image for the PC card of the CCU/NCU of SINUMERIK 840D. It contains:

• Processing of the flash filesystem
• Preparing the image for programming the PC card
• Integrated help

The PC card is programmed using standard tools. These tools are not included in SinuCom FFS.

Preconditions:

• SINUMERIK 840D

When copying the software, be sure to follow the I DT software marketing guidelines!

SinuCom CFS

The SinuCom CFS program can be used to generate an image in Ext3 format for the CF card of the NCU of the SINUMERIK 840D sl. It contains:

• Preparing the image for programming the CF card
• Integrated help

Preconditions:

• SINUMERIK 840D sl

When copying the software, make sure that you comply with the I DT software marketing guidelines.

SinuCom ARC

The SinuCom ARC program simplifies the processing of series startup data:

• Reading, deleting, inserting and changing of data for series startup
• Integrated help

Commissioning software for SINAMICS S120/SIMODRIVE 611 digital

The commissioning software for PC/PG permits optimized commissioning of drives with SINAMICS S120/SIMODRIVE 611 digital if no HMI-Advanced operating software is available.