6SL3126-2TE15-0AA4

Внимание! Указаны цены архивного каталога СА01. Для уточнения актуальной цены перейдите по ссылке заказного номера товара или перейдите в каталог СА01 2016

Double Motor Modules feature the following connections and interfaces as standard:

• 2 DC link connections via integrated DC link busbars
• 2 ? electronic power supply connections via integrated 24 V DC bars
• 4 DRIVE?CLiQ sockets
• 2 plug-in motor connections (not included in scope of supply)
• 2 safe standstill inputs (1 input per axis)
• 2 safe motor brake controller
• 2 temperature sensor inputs (KTY84-130 or PTC)
• 3 PE/protective conductor connections

The status of the Motor Modules is indicated via two multi-color LEDs.

On Double Motor Modules, the motor cable shield can be connected in the connector.

The signal cable shield can be connected to the Motor Module by means of a terminal element, e.g. Weidmuller type KLBU 3-8 SC.

The scope of supply of the Motor Modules includes:

• DRIVE?CLiQ cable (length depends on module width) to connect Motor Module to adjacent Motor Module
• 2 blanking plugs for closing unused DRIVE?CLiQ sockets
• Jumper for connecting the 24 V DC busbar to the adjacent Motor Module
• Connectors X21 and X22
• Device fans for cooling power units on modules with internal and external air cooling supplied from the internal voltage levels
• 1 set of warning signs in 30 languages
• 1 heat conducting foil (for Double Motor Modules with cold plate cooling only)