6GT2398-1CA00

Внимание! Указаны цены архивного каталога СА01. Для уточнения актуальной цены перейдите по ссылке заказного номера товара или перейдите в каталог СА01 2016

SIMATIC RF250R is a reader for operation with external antennas. Thanks to the different cylindrical antenna designs (ANT 8, ANT 12, ANT18 and ANT 30), the potential applications in the areas of tool identification and small assembly lines are extremely versatile.

This reader has either

• an RS422 interface with 3964R transmission procedure for connection to the RFID communication modules,
• or an RS232 interface with a ASCII protocol for connection to S7-1200, PC-based systems or third-party controllers.

Thanks to its high degree of protection and rugged design, the SIMATIC RF250R reader enables problem-free use even under the toughest industrial conditions. It is connected via an 8-pole M12 plug-in connector.

The reader is operated with ISO 15693-compatible transponders.

Connectable antennas

One of each of the following antennas can be operated on a SIMATIC RF250R reader:

• ANT 8 is a cylindrical antenna and is intended predominantly for the area of tool identification. The extremely small design of the antenna enables extremely accurate positioning, dimensions O x L (mm) M8 x 38
• ANT 12, universal round antenna in M12 design for assembly lines with extremely small workpiece holders, dimensions O x L (mm) M12 x 40.
• ANT 18, universal round antenna in M18 design for assembly lines with small workpiece holders, dimensions O x L (mm) M18 x 55.
• ANT 30, universal round antenna for assembly lines with small workpiece holders, dimensions O x L (mm) M30 x 58.