6FB1104-0AT01-0AS0

Внимание! Указаны цены архивного каталога СА01. Для уточнения актуальной цены перейдите по ссылке заказного номера товара или перейдите в каталог СА01 2016

An extensive range of accessories is available for the door control drives.

This is necessary to ensure low-noise operation of the door by the motor. The geared motors can be optimally integrated into the respective door drive system.

Accessories for all controllers for industrial applications

Rubber-metal anti-vibration mounts for geared motors

To ensure low-noise door operation, SIDOOR geared motors are integrated in the door system using rubber-metal anti-vibration mounts.

• Rubber-metal anti-vibration mount 6FB1104?0AT02?0AD0 for SIDOOR MDG180, SIDOOR M2 and SIDOOR M3 geared motors (door weights up to 180 kg)
• Rubber-metal anti-vibration mount 6FB1104?0AT01?0AD0 for SIDOOR MDG400 and SIDOOR M4 (door weights up to 400 kg), and SIDOOR M5 geared motors (door weights up to 600 kg)

Rubber-metal anti-vibration mount 6FB1104?0AT02?0AD0 for geared motors with door weights up to 180 kg

Rubber-metal anti-vibration mount 6FB1104?0AT01?0AD0 for geared motors with door weights up to 600 kg

Mounting bracket

Two different mounting brackets are available with elongated holes:

• Mounting bracket 6FB1104?0AT01?0AS0 for mounting SIDOOR geared motors, for flexible accommodation of the rubber-bonded metal
• Mounting bracket 6FB1104?0AT02?0AS0 for the deflector unit, this enables the toothed belt to be set to the required belt tension.

Mounting bracket 6FB1104?0AT01?0AS0 for mounting the geared motor

Mounting bracket 6FB1104?0AT02?0AS0 for the deflector unit

DIN rail holder

The standard DIN rail holder 6FB1144?0AT00?3SA0 is available for mounting controllers on the standard DIN rail TH 35 according to IEC 60715.

Door clutch holder

The door clutch holder serves to connect the respective door leaf by means of a toothed belt while also functioning as a toothed-belt lock. One door clutch holder per door leaf is required. The toothed-belt lock can accommodate both open ends of the toothed belt.

A door clutch holder is available for each toothed belt width:

• Width 12 mm: 6FB1104?0AT01?0CP0
• Width 14 mm: 6FB1104?0AT02?0CP0

Door clutch holder 6FB1104?0AT01?0CP0 (packaging size = 1 unit)

Deflector unit

The deflector unit 6FB1104?0AT03?0AS0 contains an embedded belt pulley which can be mounted on the door system. This unit deflects the STS toothed belt.

Deflector unit 6FB1104?0AT03?0AS0

Toothed belt STS

The door system is moved between the end positions of the door using the STS toothed belts. Two different toothed belt lengths can be ordered for each toothed belt width.

• Toothed belt width 12 mm:
  • Length 4 m: 6FB1104?0AT01?0AB0
  • Length 45 m: 6FB1104?0AT02?0AB0
• Toothed belt width 14 mm:
  • Length 4 m: 6FB1104?0AT03?0AB0
  • Length 55 m: 6FB1104?0AT04?0AB0

Toothed belt 6FB1104?0AT01?0AB0 (width 12 mm, length 4 m)

Toothed belt 6FB1104?0AT02?0AB0 (width 12 mm, length 45 m)

Accessories for the SIDOOR ATD410W/ATD420W machine tool door drives

Hybrid connecting cables CABLE-MDG

These connecting cables connect the SIDOOR ATD410W/ATD420W machine tool door drives to the SIDOOR MDG geared motor. Various lengths are available.

• Length 0.5 m: 6FB1104-0AT00-0CB5
• Length 1.5 m: 6FB1104-0AT01-0CB5
• Length 5 m: 6FB1104-0AT05-0CB0
• Length 7 m: 6FB1104-0AT07-0CB0
• Length 10 m: 6FB1104-0AT10-0CB0
• Length 15 m: 6FB1104-0AT15-0CB0

The SIDOOR ATD410W/ATD420W machine tool door drives are connected to a higher-level SIMATIC controller via the connector PB FC RS 485 PLUG 180 (6GK1500-0FC10) and the PB FC Standard Cable GP (6XV1830-0EH10), a standard bus cable with a special design for quick mounting. A SIMATIC RS 485/USS communication module is required on the controller side, such as the ET 200S electronic module (6ES7138-4DF11-0AB0) for the SIMATIC ET 200.

SIDOOR CABLE MDG

Electronic module for ET 200S

1-channel module 6ES7138?4DF11?0AB0 for serial data exchange via point-to-point connection, for telegrams with a max. length of 224 bytes, RS 232C, RS 422, RS 485, 2 versions, ASCII and 3964(R) protocol, Modbus and USS protocol, parameter assignment via GSD file or STEP 7 (from V5.1)

Communication module CM PtP RS 422/485 BA

Basic communication module 6ES7540?1AB00?0AA0 with one RS 422/485 interface, Freeport, 3964(R) and USS protocols, 15-pin sub D socket, max. 19.2 kbit/s, for SIMATIC S7?1500

Communication module CM 1241

Communication module 6ES7241?1CH32?0XB0 for point-to-point connection with one RS 422/RS 485 interface, 9-pin, SUB D (pin) supports Freeport, for SIMATIC S7?1200