1PH8 for SINAMICS S120 Combi for machine tools. Технические данные. Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на 1PH8 for SINAMICS S120 Combi for machine tools

| | | | | |

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/new/cat.php on line 184
1PH8 for SINAMICS S120 Combi for machine tools

1PH8 motor
Cooling	Forced ventilation
Ambient temperature, admissible	-15 ... +40 °C
Temperature monitoring	KTY84 temperature sensor in stator winding
Insulation of the stator winding in accordance with EN 60034-1 (IEC 60034-1)	For an ambient temperature of up to 40 °C
1PH808/1PH810/1PH813	Temperature class 155 (F)
Motor fan ratings
1PH808	230 V ± 10 %, 50 Hz 265 V ± 10 %, 60 Hz
1PH810/1PH813	400 V 3 AC ± 10 %, 50 Hz 480 V 3 AC ± 10 %, 60 Hz
Encoder system, built-in	DRIVE-CLiQ interface
1PH8...-1D...	22 bit incremental encoder (resolution 4194304, internal 2048 S/R) + commutation position 11 bit (encoder IC22DQ)¹⁾
1PH8...-1U...	20 bit incremental encoder (resolution 1048576, internal 512 S/R) without commutation position (encoder IN20DQ)²⁾
Sound pressure level L _pA (1 m) in accordance with EN ISO 1680 Tolerance + 3 dB	Rated pulse frequency 4 kHz
1PH808/1PH810	70 dB
1PH813	72 dB
Connection
1PH808/1PH810/1PH813	Terminal box
Fan
1PH808	Power connector
1PH810/1PH813	Terminals in terminal box
Encoder system	Connector for signals (without mating connector) or DRIVE-CLiQ
Vibration magnitude	In accordance with Siemens/EN 60034-14 (IEC 60034-14)
Shaft and flange accuracy³⁾	In accordance with Siemens/DIN 42955 (IEC 60072-1)
Degree of protection in accordance with EN 60034-5 (IEC 60034-5)
1PH808/1PH810/1PH813	IP55
Fan	IP55
Rating plate	1 unit attached to motor 1 unit supplied loose in terminal box
Paint finish	Anthracite RAL 7016
Approvals, according to	cURus

¹⁾ Maximum speedn_max = 12000 rpm.

²⁾ Maximum speedn_max = 15000 rpm.

³⁾ Shaft extension run-out, concentricity of centering ring and shaft, and perpendicularity of flange to shaft.

Terminal box assignment, max. connectable conductor cross-sections

1PH8 motor		Terminal box	Cable entry		Outer cable diameter, max.⁴⁾	Number of main terminals	Cross-section per terminal, max.	Rated current, max.⁵⁾
Type		Type	Power	External signals
					mm		mm²	A
1PH808	Forced ventilation	gk803	1 M25 1.5	1 O 22 mm⁶⁾	20	Phases: 3 M5 Grounding: 2 M5	1 10	50
1PH810	Forced ventilation	gk813	1 M32 1.5	1 O 22 mm⁶⁾	24.2	Phases: 3 M5 Grounding: 2 M5	1 16	66
1PH813	Forced ventilation	gk833	1 M40 1.5	1 O 22 mm⁶⁾	32	Phases: 3 M6 Grounding: 2 M6	1 35	104

⁴⁾ Dependent on the design of the metric cable gland.

⁵⁾ Current-carrying capacity based on EN 60204-1 and IEC 60364-5-52, according to installation type C.

⁶⁾ Hole with diameter 22 mm, at 90° to signal connection.