Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/new/cat.php on line 184
All SIMATIC MV440 stationary code readers are basic units under the terms of the license. The verification functionality is enabled by transferring the license key from the USB flash drive on which it is supplied to the MV440 code reader by means of SIMATIC License Manager.
Verification with MV440 verification systems is suitable for both inline and offline measurements. In both cases, the specification of the verification standard used must be observed to ensure a robust measurement result. This means, for example, that the lighting and alignment of the light source, camera and test object must be in accordance with the definitions of the respective standard.
If only one light source is used, the MV440 can control an external light source using the existing image-synchronized digital output, or the external light source can be operated continuously.
If more lighting directions are required, an external controller can be used to activated the desired lighting and to start each individual measurement by means of triggering. The result from the quality measurement or the relevant partial measurement is output directly by the MV440 after completion of the measurement. In the case of more than one measurement, it is the task of the external controller to combine the partial results into an overall result and to visualization this.
If the test method requires calibration, the calibration card included in the scope of supply can be used in most cases. In cases with extreme imaging requirements (e.g. with very small or very large codes), the task of calibration must be resolved application-specifically.