Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/new/cat.php on line 184
- The fail-safe CPU with a large program memory and quantity framework for demanding applications
- For configuring a fail-safe automation system for plants with increased safety requirements
- Complies with safety requirements up to SIL 3 according to IEC 61508 and up to Cat. 4 according to EN 954-1
- Fail-safe I/O modules can be connected in a distributed configuration to both integral PROFIBUS DP interfaces (PROFIsafe)
- The fail-safe I/O modules of ET 200M can be also centrally connected
- The standard modules for non-safety applications can be operated both centrally and locally
Micro Memory Card required for CPU operation.
Note:
SIPLUS extreme products are based on Siemens Industry standard products. The contents listed here were taken from the respective standard products. SIPLUS extreme-specific information was added.
|
SIPLUS CPU 317F-2 DP |
||
|---|---|---|
|
Order number |
6AG1 317-6FF03-2AB0 |
6AG1 317-6FF03-2AY0 |
|
Order No. based on |
6ES7 317-6FF03-0AB0 |
6ES7 317-6FF03-0AB0 |
|
Ambient temperature range |
-25 ... +60 °C |
|
|
Conformal coating |
Coating of the printed circuit boards and the electronic components. |
|
|
Technical data |
The technical data of the standard product applies except for the environmental conditions. |
|
|
Compliant with the standards for electronic equipment used on railway rolling stock (EN 50155, temperature T1, category 1). |
No |
Yes |
|
Technical data |
The technical data is identical to that of the based on modules. |
|
|
Ambient conditions |
||
|
Relative humidity |
5 ... 100%, condensation allowed |
|
Technical documentation on SIPLUS can be found here:
http://www.siemens.de/siplus-extreme