Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/new/cat.php on line 184
Enclosure |
|
---|---|
Mounting |
|
|
Snap-mounting on a TH 35 DIN rail compliant with IEC 60715 or screw-mounted with additional push-in lugs |
|
Snap-mounted to a TH 35 DIN rail compliant with IEC 60715, screw-mounted on a mounting plate, or mounted directly on the contactor |
System interfaces |
|
The current/voltage measuring module UM has interfaces for the following system modules: |
|
Main circuit |
|
Measuring range current/current settingIe |
|
|
2.4 to 25 A |
|
10 to 100 A |
|
20 to 200 A |
Rated insulation voltageUi at pollution degree 3 |
|
|
690 V |
|
1 000 V |
Rated operating voltageUe |
690 V |
Rated impulse withstand voltageUimp |
|
|
6 kV |
|
8 kV |
Rated frequency |
50/60 Hz |
Type of current |
|
Short-circuit protection |
Additional short-circuit protection is required in the main circuit |
Current measuring accuracy |
Within the measuring range ± 3% |
Typical voltage measuring range |
|
|
110 V to 690 V (only the phase voltages are available to the system as measured values) |
|
65 to 400 V |
Voltage measuring accuracy in the range from 230 V to 400 V |
Typically ± 3% |
Voltage measurement in ungrounded systems or in systems with integrated insulation measurement or insulation monitoring |
The current measuring module IM or the current/voltage measuring module UM can only be used in these systems in conjunction with a decoupling module DCM. |
Supply lines for voltage measurement |
Additional protection may need to be provided in the supply lines for voltage measurement. |
Feed-through opening |
|
Opening diameter |
|