Climatic conditions

Ambient temperature

0 ... 35 °C

• With heater in sheet-steel cabinet

Max. -5 °C

• With heating in GRP cabinet

Max. -15 °C

• With air-conditioning

Max. 55 °C

Relative humidity

70 %, non-condensing

Corrosive atmosphere

No

Gas inlet conditions

Max. sample gas pressure at inlet to sample preparation system

500 hPa

Sample gas pressure at inlet to sample preparation system

180 … 200 °C, non-condensing

Dust content at inlet to sample preparation system

Dust-free

Sampling probe

Sampling tube 20 x 1.5,
1 000 mm long, stainless steel,
flange: DN 65, PN 6

Max. sample gas pressure at sampling probe

500 hPa

Max. sample gas temperature at sampling probe

600 °C

Max. dust content at sampling probe

2 g/Nm

Sample gas must not be flammable or explosive.

Power supply

Supply 1

115 V AC (-15 %, +10 %)

Supply 2

230 V AC (-15 %, +10 %)

Supply 3

400 V AC (-15 %, +10 %)

Connections

Hose material

Teflon

Cables

Not armored, not halogen-free

Electrical design

According to IEC

Cable ID

Individual core labeling as option

Fusing of electronic consumers

1-pole; 2-pole as option

Duplication of analog signals

• Not electrically isolated as option
• Electrically isolated as option

Installation

Site

• In sheet-steel cabinet/frame

Indoor installation

• In GRP cabinet

Outdoor installation

Ex zone

Non-Ex area

System design

Version

Mounting frame or cabinet

Cabinet degree of protection

IP54

Automatic calibration

Yes, optional

Detailed information on the analyzers

You can find detailed information on the analyzers:

• In the "Continuous Gas Analyzers, extractive" chapter
  • ULTRAMAT 23
  • OXYMAT 6
  • FIDAMAT 6
• In the "Continuous Gas Analyzers, in-situ" chapter
  • LDS 6

Dimensions (without plinth)

Depth of sheet-steel frame (without plinth)

2 000 x 800 x 800 mm (H x W x D)

GRP cabinet (with plinth)

2 140 x 1 000 x 1 000 mm (H x W x D)

It is necessary to allow a space of 500 mm on the left or right for introduction of the hoses/cables.