Servomotor

1PH4

Cooling

Water cooling

Coolant inlet temperature

Because of the formation of condensation, we recommend a coolant inlet temperature of approx. 30 °C (86 °F), depending on the ambient conditions.

Cooling water pressure at inlet, max.

7 bar

Temperature monitoring

2 KTY 84 temperature sensors in the stator winding,
1 as reserve

Insulation of the stator winding in accordance with EN 60034 1 (IEC 60034 1)

Temperature class 155 (F) for a coolant inlet temperature of up to 30 °C (86 °F)

Encoder system, built-in

• Without DRIVE-CLiQ interface

• Incremental encoder sin/cos 1 V_pp 2048 S/R
  with C and D tracks (encoder IC2048S/R)
• Incremental encoder sin/cos 1 V_pp 2048 S/R
  without C and D tracks (encoder IN2048S/R)
• Absolute encoder 2048 S/R single-turn, 4096 revolutions multi-turn, with EnDat interface (encoder AM2048S/R)

• With DRIVE-CLiQ interface

• 22 bit incremental encoder
  (resolution 4194304, 2048 S/R internal) + 11 bit commutation position (encoder IC22DQ)
• 22 bit incremental encoder
  (resolution 4194304, 2048 S/R internal) without commutation position (encoder IN22DQ)
• 22 bit absolute encoder single-turn
  (resolution 4194304, 2048 S/R internal) + 12 bit multi-turn (traversing range 4096 revolutions) (encoder AM22DQ)

Type of construction in accordance with EN 60034 7 (IEC 60034 7)

IM B35 (IM V15, IM V35)

Terminal box location
(view DE)¹⁾

Top, rotatable 4   90°

Terminal box connection type

• Motor

Terminals in terminal box

• Encoder system and PTC thermistor

12-pin/17-pin circular socket (without mating connector) or DRIVE-CLiQ

Bearing version on DE²⁾

Duplex bearing for belt or coupling output (minimum cantilever force required)

Vibration magnitude in accordance with EN 60034 14 (IEC 60034 14)

Grade R (reduced)

Shaft and flange accuracy in accordance with DIN 42955 (IEC 60072 1)³⁾

Tolerance N (normal)

Shaft extension DE in accordance with DIN 748 3 (IEC 60072 1)

Full-key balancing with keyway

Degree of protection in accordance with EN 60034 5 (IEC 60034 5)

IP65, IP55 on shaft exit

Sound pressure level L _pA  (1 m) in accordance with EN ISO 1680
Tolerance + 3 dB

• 1PH410/1PH413

69 dB

• 1PH416

71 dB

Paint finish

Anthracite

Approvals, according to

cURus