Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/new/cat.php on line 184
|
1PM6 servomotor |
|
|
Coolant temperature, permissible |
-15 ... +40 °C (+5 ... +104 °F) |
|
Temperature monitoring |
2 KTY 84 temperature sensors in the stator winding, 1 as reserve |
|
Insulation of the stator winding in accordance with EN 60034 1 (IEC 60034 1) |
Temperature class 155 (F) for a coolant temperature of up to 40 °C (104 °F) |
|
Motor fan ratings |
400 V 3 AC 50 Hz/60 Hz |
|
Encoder systems, built in |
|
|
Incremental encoder sin/cos 1 Vpp 256 S/R |
|
19 bit incremental encoder (resolution 524288, internal 256 S/R) without commutation position (encoder IN19DQ) |
|
Type of construction in accordance with |
IM B5 (IM V1; IM V3) |
|
Terminal box location
|
|
|
Top, rotatable 4 90° |
|
On right side, rotatable 4 90° |
|
Terminal box connection type |
|
|
Klemmen im Klemmenkasten |
|
17-pin circular socket (without mating connector) or DRIVE-CLiQ with SINAMICS S120 |
|
Vibration magnitude in accordance with |
Grade SR |
|
Shaft and flange accuracy in accordance with |
Tolerance R (reduced) |
|
DE shaft extension |
With plain shaft |
|
Hollow ID for shaft |
O 11.5 mm (0.45 in) |
|
Degree of protection in accordance with |
IP55, fan IP54 |
|
Sound pressure level
L
pa
(1 m) in accordance with
|
70 dB5)6) |
|
+ 3 dB |
|
Paint finish |
Anthracite |
|
Approvals, according to |
cURus |
S/R = signals/revolution
1) Not for SIMODRIVE 611.
2) For types of construction, see Selection guides.
3) DE is the drive end with shaft. NDE is the non-drive end.
4) Shaft extension run-out, concentricity of centering ring and shaft, and perpendicularity of flange to shaft.
5) From DE to NDE with the fan operating on a 50 Hz supply system.
6) With option L37: 72 dB (A).