Order No.

6NH7 803-3BA00-0AA0

Product type designation

TIM 3V-IE DNP3

Transmission rate

Transmission rate with Industrial Ethernet

10 … 100 Mbit/s

Transmission rate in accordance with RS 232

300 … 38 400 bit/s

Interfaces

Number of interfaces in accordance with Industrial Ethernet

1

Number of electrical connections

• For external data transmission in accordance with RS 232

1

• for power supply

1

Design of electrical connection

• of the Industrial Ethernet interface

RJ45 port

• at interface 1 for external data transmission

9-pin Sub-D connector (RS232)

• at interface 2 for external data transmission

-

• for power supply

2-pin, plug-in terminal strip

Design of swap medium C-Plug

No

Supply voltage, current consumption, power loss

Type of power supply

DC

Supply voltage

24 V

• Minimum

20.4 V

• Maximum

28.8 V

Current consumed

• Maximum from backplane bus for 24 V DC

0.2 A

• From external supply voltage at 24 V DC max.

0.2 A

Effective power loss

5.8 W

Product expansion: optional backup battery

No

Type of battery

-

Backup current

• Typical

-

• Maximum

-

Permissible ambient conditions

Ambient temperature

• During operation

0 … 60°C

• During storage

-40 … +70°C

• During transport

-40 … +70°C

Relative humidity at 25 °C without condensation during operation, maximum

95 %

IP degree of protection

IP20

Design, dimensions and weights

Module format

Compact module S7-300 single-width

Width

40 mm

Height

125 mm

Depth

120 mm

Net weight

0.25 kg

Product properties, functions, componentsGeneral

Number of modules - Note

Number of TIMs per S7-300: 1

Cable length

• With RS232 interface, maximum

6 m

• With RS485 interface, maximum

-

Performance data

Performance dataS7 communication

Number of possible connections for S7 communication

• Maximum

3

• For PG connections, maximum

2

• For OP connections, maximum

1

• Note

Only via LAN

Service

• SINAUT ST7 via S7 communication

-

• PG/OP communication

Yes

Performance datamultiprotocol operation

Number of active connections in multiprotocol mode

-

Performance dataTelecontrol

Suitability for use

• TIM node station

No

• TIM station

Yes

• TIM control center

No

• Note

-

Protocol is supported

• TCP/IP

No

• DNP3

Yes

• SINAUT ST1 protocol

No

• SINAUT ST7 protocol

No

Number of DNP3 masters

• With Ethernet, maximum

8

• With RS232 interface, maximum

1

Product function: data buffering if connection is aborted

Yes

• Note

50,000 data points with one master

Product functionsManagement, configuration, programming

Configuration software required

SINAUT ST7 ES

Storage location of TIM configuration data

on the CPU or TIM

Product functionsTime

Product component: hardware real-time clock

-

Product property: buffered hardware real-time clock

-

Maximum accuracy of hardware real-time clock per day

-