Accessory set for 3-way and 5-way valve manifold DN 5 for flanging
- B31: 4 screws7/16-20 UNF x 21/8 inch to ASME B18.2.1, 2 flat gaskets
- B34: 4 screws7/16-20 UNF x 21/8 inch to ASME B18.2.1, 2 O-rings (FPM 90)
- B11: 4 screws M10x55 to DIN EN 24014, 4 washers, 2 flat gaskets
- B15 (suitable for oxygen): 4 screws M10x55 to DIN EN 24014, 4 washers, 2 flat gaskets
- B16: 4 screws M10x55 to DIN EN 24014, 4 washers, 2 O-rings (FPM 90)
Washers O 10.5 to DIN 125
Flat gaskets made of PTFE, max. permissible 420 bar (6092 psi), 80 °C (176 °F)
O-ring to DIN 3771, 20 x 2.65 – S – FPM90, max. permissible 420 bar (6092 psi), 120 °C (176 °F)
Note: M10 screws only permissible up to PN 160 (2320 psi)!
mounting plate
Made of electrogalvanized sheet-steel
- M11: For wall mounting or for securing on rack (72 mm grid)
Scope of delivery:- 1 mounting plate 7MF9006-6EA with bolts for mounting on valve manifold
- M12: For pipe mounting
Scope of delivery:- 1 mounting plate M11
- 2 pipe brackets with nuts and washers for pipes with max. O 60.3 mm
Valve manifold 100 bar, suitable for oxygen
S12: Only in combination with versions for aggressive liquids and gases