- Power supplies for SIPLUS S7-400
- For conversion of AC or DC line voltages to the 5 V DC and 24 V DC operating voltages required
- 4 A, 10 A and 20 A output currents
Note:
SIPLUS extreme products are based on Siemens Industry standard products. The contents listed here were taken from the respective standard products. SIPLUS extreme-specific information was added.
|
SIPLUS S7-400 PS |
||
|---|---|---|
|
Order No. |
6AG1 405-0KA02-2AA0 |
6AG1 407-0KR02-4AA0 |
|
Order No. based on |
6ES7 405-0KA02-0AA0 |
6ES7 407-0KR02-0AA0 |
|
Ambient temperature range |
-25 ... +70 °C |
-0 ... +60 °C |
|
Conformal coating |
Coating of the printed circuit boards and the electronic components |
|
|
Technical data |
The technical data of the standard product applies, except for the environmental conditions |
|
|
Environmental conditions |
||
|
Relative humidity |
5 ... 100 % |
|
|
Biologically active substances |
Conformity with EN 60721 3 3, Class 3B2 mold and fungal spores (except fauna) |
|
|
Chemically active substances |
Conformity with EN 60721 3 3, Class 3C4 incl. salt mist and ISA–S71.04 severity level G1; G2; G3; GX1)2) |
|
|
Mechanically active substances |
Conformity with EN 60721 3 3, Class 3S4 including sand, dust2) |
|
|
Air pressure (depending on the highest positive temperature range specified) |
1080 ... 795 hPa (-1000 ... +2000 m) 795 ... 658 hPa (+2000 ... +3500 m) 658 ... 540 hPa (+3500 ... +5000 m) |
|
1) ISA-S71.04 severity level GX: Long-term load: SO2 < 4.8 ppm; H2S < 9.9 ppm; Cl < 0.2 ppm; HCl < 0.66 ppm; HF < 0.12 ppm; NH < 49 ppm; O3 < 0.1 ppm; NOX < 5.2 ppm
Limit value (max. 30 min/d): SO2 < 14.8 ppm; H2S < 49.7 ppm; Cl < 1.0 ppm; HCl < 3.3 ppm; HF < 2.4 ppm; NH < 247 ppm; O3 < 1.0 ppm; NOX < 10.4 ppm
2)The supplied plug covers must remain in place over the unused interface when operated in atmospheres containing corrosive gases!
For further technical documentation on SIPLUS, see:
http://www.siemens.com/siplus-extreme