400 V

2 - 105 kW

500 V

2 - 105 kW

1~AC 230V supply - using either UPS or 100V - 400V DC from a battery possible, for evacuation operation when the line supply fails

Setting, diagnostics

Operator panel connected to Dynavert L, LEDs, serial interface

Control commands

Contacts or 24 V control signals (PLC-compatible for travel commands and other digital input), DCP interface

Motor types

Synchronous / induction – gearless or with gear

Signal outputs:

Isolated contacts, 250 V AC /1A, DCP interface 

Speed feedback for synchronous motors

1 V-PP signal level (max. 10 m encoder cable)

Speed feedback for induction motors

Encoder with HTL signal level or TTL signal level, the pulse number can be parameterized,
1024 - 4096 pulses / revolution (2 tracks with 90° offset).

Open-loop operation

Possible with induction motors up to 1.2 m/s elevator cabin speed

Mechanical degree of protection

IP20

Ambient temperature, storage

-25 … +70 °C

Ambient temperature, operation

0 … + 45 °C

Installation height

1000 m above sea level; above this altitude, the drive unit utilization must be reduced by 10 % for every 1000 m

Cooling

Direct forced air cooling, automatic temperature control