Radio interference suppression filters. Обзор. Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на Radio interference suppression filters

| |

Radio interference suppression filters

SINAMICS DC MASTER applications are in compliance with the EMC product standard EN 61800-3 for electric drives when taking into account that the units are integrated into the plant or system in compliance with EMC rules.

However, EMC legislation does stipulate that the plant or system as a whole must be electromagnetically compatible with its environment.

If radio interference suppression level "A1" according to EN 55011 is to be achieved, then in addition to the commutating reactors, a radio interference suppression filter is also required. Radio interference suppression filters reduce radio interference voltages of the converter that occur in conjunction with the commutating reactor. It is only possible to use radio interference suppression filters for grounded line supplies.

Radio interference suppression filters generate leakage currents. In accordance with DIN VDE 0160, a PE connection with a cross-section of 10 mm² is required. For the filters to have optimum effect, it is absolutely essential that they and the unit are installed on a single metal plate.

For converter units with 3-phase connection, the minimum rated filter current is equal to the DC output current of the unit times 0.82. For a two-phase connection (field power section or single-phase operation of the armature power section) only two phases are connected to the three-phase radio interference suppression filter. In this case, the line current is equal to the DC field current.

List of the recommended radio interference suppression filters from EPCOS

Rated current Radio interference suppression filter	Radio interference suppression filter			Terminal cross-section (mm²) or threaded hole	Weight, approx.	Dimensions (W H D)
A	Type				kg	mm mm mm
8	B84143-G8-R11			4 mm²	1.3	80 230 50
20	B84143-G20-R11			4 mm²	1.3	80 230 50
36	B84143-G36-R11			6 mm²	2.8	150 280 60
50	B84143-G50-R11			16 mm²	3.3	150 60 330
66	B84143-G66-R11			25 mm²	4.4	150 330 80
90	B84143-G90-R11			25 mm²	4.9	150 330 80
120	B84143-G120-R11			50 mm²	7.5	200 380 90
150	B84143-G150-R11			50 mm²	8.0	200 380 90
220	B84143-G220-R11			95 mm²	11.5	220 430 110
150	B84143-B150-S			M10	13	140 310 170
180	B84143-B180-S			M10	13	140 310 170
250	B84143-B250-S			M10	15	115 360 190
320	B84143-B320-S			M10	21	115 360 260
400	B84143-B400-S			M10	21	115 360 260
600	B84143-B600-S			M10	22	115 410 260
1 000	B84143-B1000-S			M12	28	165 420 300
1 600	B84143-B1600-S			2 M12	34	165 420 300
2 500	B84143-B2500-S			4 M12	105	200 810 385
		^^	^
500 V		20
760 V		21
690 V		24
480 V			0
530 V			2

List of the recommended radio interference suppression filters from Siemens

Rated current Radio interference suppression filter	Radio interference suppression filter	Terminal cross-section	Ground stud	Weight, approx.	Dimensions (W H D)
A	Type	mm²		kg	mm mm mm
12	6SE7021-0ES87-0FB1	4	M6	2.5	215 x 90 81
18	6SE7021-8ES87-0FB1	4	M6	2.5	215 x 90 81
36	6SE7023-4ES87-0FB1	16	M6	4	231 101 86
80	6SE7027-2ES87-0FB1	50	M10	9	308 141 141
120	6SE7031-2ES87-0FA1	50	M10	10	348 171 141
190	6SE7031-8ES87-0FA1	95	M10	10	404 171 141
320	6SE7033-2ES87-0FA1	Connecting lug	M10 30	21	300 260 116
600	6SE7036-0ES87-0FA1	Connecting lug	M10 30	22	350 260 116
1 000	6SE7041-0ES87-0FA1	Connecting lug	M10 30	28	350 300 166
1 600	6SE7041-6ES87-0FB1	Connecting lug	M12 30	34	400 300 166