- The CPU with a medium sized program memory and quantity structures to build a fail-safe automation system for plants with increased safety requirements
- Complies with safety requirements up to SIL 3 according to IEC 61508, PL e in accordance with ISO 13849 and up to category 4 of EN 954-1
- The fail-safe I/O modules can be locally connected to the integrated PROFINET interface (PROFIsafe) and/or to the integrated PROFIBUS DP interface (PROFIsafe)
- The fail-safe I/O modules of ET 200M can be also centrally connected
- The standard modules for non-safety applications can be operated both centrally and locally
- Component based Automation (CBA) on PROFINET
- PROFINET IO Controller for operating distributed I/O on PROFINET
- PROFINET interface with 2-port switch
- PROFINET proxy for intelligent devices on PROFIBUS DP in Component based Automation (CBA)
Micro Memory Card required for CPU operation.
Note:
SIPLUS extreme products are based on Siemens Industry standard products. The contents listed here were taken from the respective standard products. SIPLUS extreme-specific information was added.
|
SIPLUS CPU 315F-2 PN/DP |
||
|---|---|---|
|
Order No. |
6AG1 315-2FJ14-2AB0 |
6AG1 315-2FJ14-2AY0 |
|
Order No. based on |
6ES7 315-2FJ14-0AB0 |
6ES7 315-2FJ14-0AB0 |
|
Ambient temperature range |
-25 ... +60 °C |
|
|
Conformal coating |
Coating of the printed circuit boards and the electronic components |
|
|
Technical data |
The technical data of the standard product applies except for the environmental conditions. |
|
|
Compliant with the standards for electronic equipment used on railway rolling stock (EN 50155, temperature T1, category 1). |
No |
Yes |
|
Environmental conditions: |
||
|
Relative humidity |
5 ... 100%, condensation allowed |
|
Technical documentation on SIPLUS can be found here:
http://www.siemens.de/siplus-extreme