- Permits combined operation of fail-safe signal modules in safety mode and standard S7-300 modules in the same ET 200M system.
- The isolation module is not required if the safety class SIL 3 or safety category < Cat. 4 is to be achieved.
Note:
SIPLUS extreme products are based on Siemens Industry standard products. The contents listed here were taken from the respective standard products. SIPLUS extreme-specific information was added.
|
SIPLUS S7-300 isolation module |
|
|
Order No. |
6AG1 195-7KF00-2XA0 |
|
Order No. based on |
6ES7 195-7KF00-0XA0 |
|
Ambient temperature range |
- 25 ... + 60 °C |
|
Conformal coating |
Coating of the printed circuit boards and the electronic components |
|
Technical specifications |
The technical data of the standard product applies except for the environmental conditions. |
|
Environmental conditions |
|
|
Relative humidity |
5 ... 100%, condensation allowed |
The technical documentation on SIPLUS can be found here:
http://www.siemens.de/siplus-extreme