- Connection of up to 256 stations on one SINAUT MICRO SC OPC server;
by connecting several SINAUT MICRO SC256 OPC servers to one OPC client, more than 256 stations can be connected to one control center - Access to SIMATIC S7-200 variables over the OPC interface
- Wireless communication between S7-200 stations through the integral routing function
- WinCC and WinCC flexible can be used as clients
- Configuration of monitoring time and time synchronization of S7-200 stations
- Adjustable cyclic transmission of all variables; transmission of variables can be combined with cyclic monitoring of stations by the control center
- Event-based communication with the S7-200 stations
- Input screens for creation of S7-200 stations
- The PC on which the MICRO SC software is installed must be permanently accessible from the GPRS network. The PC must therefore be directly connected to the GPRS provider using a dedicated line, or permanently to the Internet, e.g. by means of DSL.
Security
- Password authentication for establishment of connection by an S7-200 station
- Secure data transfer between modem, Internet and SINAUT MICRO SC using encryption algorithms
Diagnostics
- Integrated diagnostic functions for:
- Tabular overall view of connection status of all stations
- Connection status as list
- Adjustable refresh response
- Manual scanning of connection status
- Integral diagnostics functions for monitoring of connections
Combination of SINAUT MICRO and SINAUT ST7
SINAUT MICRO and SINAUT ST7 use different protocols for data transmission. However, it is possible to combine a SINAUT MICRO system with a SINAUT ST7 system. This is carried out in the PC of the control center via the OPC server of the SINAUT MICRO SC.
Merging of SINAUT MICRO with SINAUT ST7 when using WinCC in the control center
Merging of SINAUT MICRO with SINAUT ST7 when using a third-party system in the control center