General information

Power supply

400 V 3AC  +10%/-15%, 50 Hz

400 V 3AC  +10%/-15%, 60 Hz

Connected load: approx. 5.5 kVA

If the delta voltage deviates, a single-phase supply must be provided in addition:

120 V 3AC  +10%/-15%, 50 Hz

120 V 3AC  +10%/-15%, 60 Hz

230 V 3AC  +10%/-15%, 50 Hz

230 V 3AC +10%/-15%, 60 Hz

Connected load: approx. 1.5 kVA

Other voltages up to 500 V possible on request

Auxiliary media

• Compressed air

6 000 ... 8 000 hPa, purified compressed air, free of oil, water and dust

• Flow

Approx. 4 ... 6 m³/h, depends on purging frequency and duration

Sample gas connection

8 mm pipe union, connection for heated or unheated sample gas line; required pump capacity at 700 hPa absolute approx. 2 to 5 l/min

Liquid-cooled sampling probe

Type

F6534-B12

Material

Stainless steel, mat. No. 1.4571

Length

1 000/1 500/2 000/2 500/3 000/3 500 mm (corresponds to immersion depth)

Sampling point

Dependent on installation:

• E1 sampling point on left
• E2 sampling point on right

Process temperature

Up to 1 400 °C

Coolant

Synthetic heat transfer liquid

Coolant flow rate

Max. 3 200 l/h

Weight

Approx. 150 kg

Electrically heated dust filter

Power supply

See General information

Filter

Sintered metal filter SIKA-R30 (3  m for 98 %)

Filters with smaller pore sizes available on request

Operating temperature

Approx. 200 °C, isolated contact for low temperature

Backflushing, two-stage (filter element and filter surface)

6 000 ... 8 000 hPa, purified compressed air, free of oil, water and dust

Compressed air connection

Filter enclosure "

Filter pipe "

Sample gas connection

• Sample gas inlet

Male thread M24x1.5

• Sample gas outlet

Pipe union DN 8

Weight

Approx. 20 kg

Compressed air valve manifold

Power supply

See General information

Compressed air connection

6 000 ... 8 000 hPa, purified compressed air, free of oil, water and dust

Ambient temperature

Max. 70 °C

Maximum operating pressure

16 000 hPa

Pressure switch

800 ... 200 hPa absolute, adjustable for detection of low pressure

Dimensions (WxHxD) in mm

630 x 380 x 210

Weight

Approx. 40 kg

Retraction unit with electrical and pneumatic drive

Power supply

See General information

Drive

• Duplex chain drive, installed protected in carrier
• Worm gear motor
• Compressed air motor for emergency retraction on failure of power supply
• Adjustment of product immersion depth possible using limit switch

Travel time

Approx. 90 s

Dimensions

Type 1: 3 780 mm for probe length 1 000 ... 1 500 mm

Type 2: 5 300 mm for probe length 2 000 ... 3 500 mm

Weight

Approx. 420 kg

Heat exchange unit

Power supply

See General information

Heat output

Max. 65 kW

Coolant

Synthetic heat transfer liquid

Fill quantity

Approx. 25 l

Flow

Max. 3 200 l/h, adjustable

Operating temperature

• Inlet temperature of coolant

200 °C

• Outlet temperature of coolant

170 °C

Dimensions (WxHxD) in mm

1 200 x 1 850 x 1 600

Weight

Approx. 400 kg

Control and monitoring unit

Power supply

See General information

Control voltage

24 V DC

Signals

Floating contacts to the host process control system

Dimensions (WxHxD) in mm

760 x 760 x 210

Weight

Approx. 60 kg