SCALANCE X-200 managed. Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на SCALANCE X-200 managed

| | | | | | | | |

SIPLUS SCALANCE X-200 managed

Order No.	6GK5 204-2BB10-2AA3	6GK5 204-2BC10-2AA3	6GK5 204-2BB10-2CA2
Product type designation	SCALANCE X204-2	SCALANCE X204-2LD	SCALANCE X204-2TS
Transmission rate
Transfer rate 1	10 Mbit/s	10 Mbit/s	10 Mbit/s
Transfer rate 2	100 Mbit/s	100 Mbit/s	100 Mbit/s
Interfaces
Number of electrical/optical connections
for network components or terminal equipment maximum	6	6	6
as combo port for network components or terminal equipment	-	-	-
Number of electrical connections
for network components and terminal equipment	4	4	4
for alarm contact	1	1	1
for power supply	1	1	1
for redundant power supply	1	1	1
Design of electrical/optical connections for network components or terminal equipment
Design of electrical connection
for network components and terminal equipment	RJ45 port	RJ45 port	RJ45 port
for signaling contact	2-pole terminal block	2-pole terminal block	2-pole terminal block
for power supply	4-pole terminal block	4-pole terminal block	4-pole terminal block
Number of optical interfaces for optical waveguide at 100 Mbit/s	2	2	2
Design of optical interface for optical waveguide at 100 Mbit/s	BFOC sockets (multimode up to 5 km)	BFOC port (singlemode up to 26 km)	BFOC sockets (multimode up to 5 km)
Connectable optical power relative to 1 mW
of the transmitter output	-19 … -14 dB	-15 … -7 dB	-19 … -14 dB
of the receiver input maximum	-	-	-
Optical sensitivity relative to 1 mW of the receiver input minimum	-34 dB	-34 dB	-34 dB
Attenuation of fiber-optic cable transmission link minimum necessary	0 dB	0 dB	0 dB
Range at the optical interface depending on the optical fiber used	0 … 5 km	0 … 26 km	0 … 5 km
design of the removable storage C-PLUG	Yes	Yes	Yes
Inputs/outputs
Operating current of signaling contacts at AC maximum	-	-	-
Operating voltage of signaling contacts at DC rated value	24 V	24 V	24 V
Operating current of signaling contacts at DC maximum	0.1 A	0.1 A	0.05 A
Supply voltage, current consumption, power loss
Type of voltage of supply voltage	DC	DC	DC
Supply voltage external	24 V	24 V	12 V
minimum	18 V	18 V	10 V
maximum	32 V	32 V	30 V
Product component fusing at power supply input	Yes	Yes	Yes
Type of fusing at input for supply voltage
Consumed current maximum	0.265 A	0.265 A	0.6 A
Active power loss at 24 V for DC	6.36 W	6.36 W	6.6 W
Permitted ambient conditions
Ambient temperature
during operating	-40 … +60 °C	-40 … +60 °C	-40 … +70 °C
during storage	-40 … +70 °C	-40 … +70 °C	-40 … +70 °C
during transport	-40 … +70 °C	-40 … +70 °C	-40 … +70 °C
Comment	-	-	If the IE switch X-204-2TS is installed horizontally, a maximum ambient temperature of +40 °C is permitted
Relative humidity at 25 °C without condensation during operating maximum	95 %	95 %	95 %
Protection class IP	IP30	IP30	IP20
Design, dimensions and weight
Design	Compact	Compact	Compact
Width	60 mm	60 mm	60 mm
Height	125 mm	125 mm	125 mm
Depth	124 mm	124 mm	124 mm
Net weight	0.78 kg	0.78 kg	0.78 kg
Type of mounting
35 mm DIN rail mounting	Yes	Yes	Yes
wall mounting	Yes	Yes	Yes
S7-300 rail mounting	Yes	Yes	Yes
Type of mounting	-	-	-
Product properties, functions, componentsgeneral
Cascading in the case of a redundant ring at reconfiguration time of <'~0.3'~s	50	50	50
Cascading in cases of star structuring	Any (depending only on signal propagation time)	Any (depending only on signal propagation time)	Any (depending only on signal propagation time)
Product functionsmanagement, configuration
Product function
CLI	Yes	Yes	Yes
web-based management	Yes	Yes	Yes
MIB support	Yes	Yes	Yes
TRAPs via email	Yes	Yes	Yes
Configuration with STEP 7	Yes	Yes	Yes
SMTP server	Yes	Yes	Yes
Port mirroring	Yes	Yes	Yes
for IRT PROFINET IO switch	No	No	No
PROFINET IO diagnosis	Yes	Yes	Yes
switch-managed	Yes	Yes	Yes
Protocol is supported
Telnet	Yes	Yes	Yes
HTTP	Yes	Yes	Yes
HTTPS	Yes	Yes	Yes
TFTP	Yes	Yes	Yes
FTP	Yes	Yes	Yes
BOOTP	No	No	No
SNMP v1	Yes	Yes	Yes
SNMP v2	Yes	Yes	Yes
SNMP v3	Yes	Yes	Yes
DCP	Yes	Yes	Yes
LLDP	Yes	Yes	Yes
Identification & maintenance
I&M0 - device-specific information	Yes	Yes	Yes
I&M1 - plant identification/location name	Yes	Yes	Yes
Product functionsDiagnosis
Product function
Port diagnostics	Yes	Yes	Yes
Statistics Packet Size	Yes	Yes	Yes
Statistics packet type	Yes	Yes	Yes
Error statistics	Yes	Yes	Yes
Product functionsDHCP
Product function DHCP client	Yes	Yes	Yes
Product functionsRedundancy
Product function
Ring redundancy	Yes	Yes	Yes
Redundancy manager	Yes	Yes	Yes
Standby redundancy	No	No	No
HSR redundancy protocol	Yes	Yes	Yes
MRP redundancy protocol	Yes	Yes	Yes
redundancy procedure PRP	-	-	-
Passive listening	Yes	Yes	Yes
Protocol is supported PRP	-	-	-
Product functionsSecurity
Protocol is supported SSH	Yes	Yes	Yes
Product functionsTime
Product function
SICLOCK support	Yes	Yes	Yes
Protocol is supported
NTP	No	No	No
SNTP	Yes	Yes	Yes
Standards, specifications, approvals
Standard
for EMC from FM	FM3611: Class 1, Division 2, Group A, B, C, D / T4, CL.1, Zone 2, GP. IIC, T4	FM3611: Class 1, Division 2, Group A, B, C, D / T4, CL.1, Zone 2, GP. IIC, T4	FM3611: Class 1, Division 2, Group A, B, C, D / T4, CL.1, Zone 2, GP. IIC, T4
for hazardous zone	EN 60079-0 : 2006, EN 60079-15: 2005, II 3 G Ex nA II T4 KEMA 07 ATEX 0145X	EN 60079-0 : 2006, EN 60079-15: 2005, II 3 G Ex nA II T4 KEMA 07 ATEX 0145X	EN 60079-0 : 2006, EN 60079-15: 2005, II 3 G Ex nA II T4 KEMA 07 ATEX 0145X
for safety of CSA and UL	UL 60950-1, CSA C22.2 No. 60950-1	UL 60950-1, CSA C22.2 No. 60950-1	UL 60950-1, CSA C22.2 No. 60950-1
for hazardous area of CSA and UL	ANSI / ISA 12.12.01, CSA C22.2 No. 213-M1987, CL. 1 / Div. 2 / GP. A, B, C, D T4, CL. 1 / Zone 2 / GP. IIC, T4	ANSI / ISA 12.12.01, CSA C22.2 No. 213-M1987, CL. 1 / Div. 2 / GP. A, B, C, D T4, CL. 1 / Zone 2 / GP. IIC, T4	ANSI / ISA 12.12.01, CSA C22.2 No. 213-M1987, CL. 1 / Div. 2 / GP. A, B, C, D T4, CL. 1 / Zone 2 / GP. IIC, T4
for emitted interference	EN 61000-6-4:2001 (Class A)	EN 61000-6-4 (Class A)	EN 61000-6-4 (Class A)
for interference immunity	EN 61000-6-4:2001	EN 61000-6-2	EN 61000-6-2
Verification of suitability	EN 61000-6-4:2001	EN 61000-6-2, EN 61000-6-4	EN 61000-6-2, EN 61000-6-4
CE mark	Yes	Yes	Yes
C-Tick	Yes	Yes	Yes
Railway application in accordance with EN 50155	No	No	Yes
Railway application in accordance with EN 50124-1	No	No	No
Marine classification association
American Bureau of Shipping Europe Ltd. (ABS)	Yes	Yes	No
Bureau Veritas (BV)	Yes	Yes	No
Det Norske Veritas (DNV)	Yes	Yes	No
Germanische Lloyd (GL)	Yes	Yes	No
Lloyds Register of Shipping (LRS)	Yes	Yes	No
Nippon Kaiji Kyokai (NK)	Yes	Yes	No
Marine classification association/ Polski Rejestr Statkow (PRS)	Yes	Yes	No

Order No.	6GK5 206-1BB10-2AA3	6GK5 206-1BC10-2AA3	6GK5 208-0BA10-2AA3	6GK5 208-0HA00-2AA6
Product type designation	SCALANCE X206-1	SCALANCE X206-1LD	SCALANCE X208	SCALANCE X208PRO
Transmission rate
Transfer rate 1	10 Mbit/s	10 Mbit/s	10 Mbit/s	10 Mbit/s
Transfer rate 2	100 Mbit/s	100 Mbit/s	100 Mbit/s	100 Mbit/s
Interfaces
Number of electrical/optical connections
for network components or terminal equipment maximum	7	7	8	8
as combo port for network components or terminal equipment	-	-	-	-
Number of electrical connections
for network components and terminal equipment	6	6	8	8
for alarm contact	1	1	1	1
for power supply	1	1	1	1
for redundant power supply	1	1	1	1
Design of electrical/optical connections for network components or terminal equipment
Design of electrical connection
for network components and terminal equipment	RJ45 port	RJ45 port	RJ45 port	M12 port, 4-pin, D-coded
for signaling contact	2-pole terminal block	2-pole terminal block	2-pole terminal block	5-pin M12 socket (b-coded)
for power supply	4-pole terminal block	4-pole terminal block	4-pole terminal block	4-pin M12 interface (A-coded)
Number of optical interfaces for optical waveguide at 100 Mbit/s	1	1	-	-
Design of optical interface for optical waveguide at 100 Mbit/s	BFOC sockets (multimode up to 5 km)	BFOC port (singlemode up to 26 km)	-	-
Connectable optical power relative to 1 mW
of the transmitter output	-19 … -14 dB	-15 … -7 dB	- -	- -
of the receiver input maximum	-	-	-	-
Optical sensitivity relative to 1 mW of the receiver input minimum	-	-34 dB	-	-
Attenuation of fiber-optic cable transmission link minimum necessary	0 dB	0 dB	-	-
Range at the optical interface depending on the optical fiber used	0 … 5 km	0 … 26 km	- -	- -
design of the removable storage C-PLUG	Yes	Yes	Yes	Yes
Inputs/outputs
Operating current of signaling contacts at AC maximum	-	-	-	-
Operating voltage of signaling contacts at DC rated value	24 V	24 V	24 V	24 V
Operating current of signaling contacts at DC maximum	0.1 A	0.1 A	0.1 A	0.1 A
Supply voltage, current consumption, power loss
Type of voltage of supply voltage	DC	DC	DC	DC
Supply voltage external	24 V	24 V	24 V	24 V
minimum	18 V	18 V	18 V	18 V
maximum	32 V	32 V	32 V	32 V
Product component fusing at power supply input	Yes	Yes	Yes	Yes
Type of fusing at input for supply voltage
Consumed current maximum	0.22 A	0.2 A	0.185 A	0.185 A
Active power loss at 24 V for DC	5.28 W	5.28 W	3.84 W	4.4 W
Permitted ambient conditions
Ambient temperature
during operating	-40 °C … + 60 °C	-40 °C … + 60 °C	-40 °C … + 60 °C	-20 … +70 °C
during storage	-40 … +70 °C	-40 … +70 °C	-40 … +70 °C	-40 … +70 °C
during transport	-40 … +70 °C	-40 … +70 °C	-40 … +70 °C	-40 … +70 °C
Comment	-	-	-	-
Relative humidity at 25 °C without condensation during operating maximum	95 %	95 %	95 %	95 %
Protection class IP	IP30	IP30	IP30	IP 65/67
Design, dimensions and weight
Design	Compact	Compact	Compact	Compact
Width	60 mm	60 mm	60 mm	90 mm
Height	125 mm	125 mm	125 mm	125 mm
Depth	124 mm	124 mm	124 mm	124 mm
Net weight	0.78 kg	0.78 kg	0.78 kg	1 kg
Type of mounting
35 mm DIN rail mounting	Yes	Yes	Yes	Yes
wall mounting	Yes	Yes	Yes	Yes
S7-300 rail mounting	Yes	Yes	Yes	Yes
Type of mounting	-	-	-	-
Product properties, functions, componentsgeneral
Cascading in the case of a redundant ring at reconfiguration time of <'~0.3'~s	50	50	50	50
Cascading in cases of star structuring	Any (depending only on signal propagation time)	Any (depending only on signal propagation time)	Any (depending only on signal propagation time)	Any (depending only on signal propagation time)
Product functionsmanagement, configuration
Product function
CLI	Yes	Yes	Yes	No
web-based management	Yes	Yes	Yes	Yes
MIB support	Yes	Yes	Yes	Yes
TRAPs via email	Yes	Yes	Yes	Yes
Configuration with STEP 7	Yes	Yes	Yes	Yes
SMTP server	Yes	Yes	Yes	Yes
Port mirroring	Yes	Yes	Yes	Yes
for IRT PROFINET IO switch	No	No	No	No
PROFINET IO diagnosis	Yes	Yes	Yes	No
switch-managed	Yes	Yes	Yes	Yes
Protocol is supported
Telnet	Yes	Yes	Yes	Yes
HTTP	Yes	Yes	Yes	Yes
HTTPS	Yes	Yes	Yes	Yes
TFTP	Yes	Yes	Yes	Yes
FTP	Yes	Yes	Yes	Yes
BOOTP	No	No	No	No
SNMP v1	Yes	Yes	Yes	Yes
SNMP v2	Yes	Yes	Yes	Yes
SNMP v3	Yes	Yes	Yes	Yes
DCP	Yes	Yes	Yes	No
LLDP	Yes	Yes	Yes	No
Identification & maintenance
I&M0 - device-specific information	Yes	Yes	Yes	-
I&M1 - plant identification/location name	Yes	Yes	Yes	-
Product functionsDiagnosis
Product function
Port diagnostics	Yes	Yes	Yes	Yes
Statistics Packet Size	Yes	Yes	Yes	Yes
Statistics packet type	Yes	Yes	Yes	Yes
Error statistics	Yes	Yes	Yes	Yes
Product functionsDHCP
Product function DHCP client	Yes	Yes	Yes	Yes
Product functionsRedundancy
Product function
Ring redundancy	Yes	Yes	Yes	Yes
Redundancy manager	Yes	Yes	Yes	No
Standby redundancy	No	No	No	No
HSR redundancy protocol	Yes	Yes	Yes	Yes
MRP redundancy protocol	Yes	Yes	Yes	No
redundancy procedure PRP	-	-	-	-
Passive listening	Yes	Yes	Yes	Yes
Protocol is supported PRP	-	-	-	-
Product functionsSecurity
Protocol is supported SSH	Yes	Yes	Yes	Yes
Product functionsTime
Product function
SICLOCK support	Yes	Yes	Yes	No
Protocol is supported
NTP	No	No	No	No
SNTP	Yes	Yes	Yes	No
Standards, specifications, approvals
Standard
for EMC from FM	FM3611: Class 1, Division 2, Group A, B, C, D / T4, CL.1, Zone 2, GP. IIC, T4	FM3611: Class 1, Division 2, Group A, B, C, D / T4, CL.1, Zone 2, GP. IIC, T4	FM3611: Class 1, Division 2, Group A, B, C, D / T4, CL.1, Zone 2, GP. IIC, T4	FM3611: Class 1, Division 2, Group A, B, C, D / T4, CL.1, Zone 2, GP. IIC, T4
for hazardous zone	EN 60079-0 : 2006, EN 60079-15: 2005, II 3 G Ex nA II T4 KEMA 07 ATEX 0145X	EN 60079-0 : 2006, EN 60079-15: 2005, II 3 G Ex nA II T4 KEMA 07 ATEX 0145X	EN 60079-0 : 2006, EN 60079-15: 2005, II 3 G Ex nA II T4 KEMA 07 ATEX 0145X	EN 60079-0 : 2006, EN 60079-15: 2005, II 3 G Ex nA II T4 KEMA 07 ATEX 0145X
for safety of CSA and UL	UL 60950-1, CSA C22.2 No. 60950-1	UL 60950-1, CSA C22.2 No. 60950-1	UL 60950-1, CSA C22.2 No. 60950-1	UL 60950-1, CSA C22.2 No. 60950-1
for hazardous area of CSA and UL	ANSI / ISA 12.12.01, CSA C22.2 No. 213-M1987, CL. 1 / Div. 2 / GP. A, B, C, D T4, CL. 1 / Zone 2 / GP. IIC, T4	ANSI / ISA 12.12.01, CSA C22.2 No. 213-M1987, CL. 1 / Div. 2 / GP. A, B, C, D T4, CL. 1 / Zone 2 / GP. IIC, T4	ANSI / ISA 12.12.01, CSA C22.2 No. 213-M1987, CL. 1 / Div. 2 / GP. A, B, C, D T4, CL. 1 / Zone 2 / GP. IIC, T4	ANSI / ISA 12.12.01, CSA C22.2 No. 213-M1987, CL. 1 / Div. 2 / GP. A, B, C, D T4, CL. 1 / Zone 2 / GP. IIC, T4
for emitted interference	EN 61000-6-4:2001 (Class A)	EN 61000-6-4 (Class A)	EN 61000-6-4 (Class A)	EN 61000-6-4:2001 (Class A)
for interference immunity	EN 61000-6-2:2001	EN 61000-6-2	EN 61000-6-2	EN 61000-6-2:2001
Verification of suitability	EN 61000-6-2:2001, EN 61000-6-4:2001	EN 61000-6-2, EN 61000-6-4	EN 61000-6-2, EN 61000-6-4	EN 61000-6-2:2001, EN 61000-6-4:2001
CE mark	Yes	Yes	Yes	Yes
C-Tick	Yes	Yes	Yes	Yes
Railway application in accordance with EN 50155	No	No	No	No
Railway application in accordance with EN 50124-1	No	No	No	No
Marine classification association
American Bureau of Shipping Europe Ltd. (ABS)	Yes	Yes	Yes	Yes
Bureau Veritas (BV)	Yes	Yes	Yes	Yes
Det Norske Veritas (DNV)	Yes	Yes	Yes	Yes
Germanische Lloyd (GL)	Yes	Yes	Yes	Yes
Lloyds Register of Shipping (LRS)	Yes	Yes	Yes	Yes
Nippon Kaiji Kyokai (NK)	Yes	Yes	Yes	Yes
Marine classification association/ Polski Rejestr Statkow (PRS)	Yes	Yes	Yes	Yes

Order No.	6GK5 212-2BB00-2AA3	6GK5 212-2BC00-2AA3	6GK5 216-0BA00-2AA3	6GK5 224-0BA00-2AA3
Product type designation	SCALANCE X212-2	SCALANCE X212-2LD	SCALANCE X216	SCALANCE X224
Transmission rate
Transfer rate 1	10 Mbit/s	10 Mbit/s	10 Mbit/s	10 Mbit/s
Transfer rate 2	100 Mbit/s	100 Mbit/s	100 Mbit/s	100 Mbit/s
Interfaces
Number of electrical/optical connections
for network components or terminal equipment maximum	14	14	16	24
as combo port for network components or terminal equipment	-	-	-	-
Number of electrical connections
for network components and terminal equipment	12	12	16	24
for alarm contact	1	1	1	1
for power supply	1	1	1	1
for redundant power supply	1	1	1	1
Design of electrical/optical connections for network components or terminal equipment
Design of electrical connection
for network components and terminal equipment	RJ45 port	RJ45 port	RJ45 port	RJ45 port
for signaling contact	2-pole terminal block	2-pole terminal block	2-pole terminal block	2-pole terminal block
for power supply	4-pole terminal block	4-pole terminal block	4-pole terminal block	4-pole terminal block
Number of optical interfaces for optical waveguide at 100 Mbit/s	2	2	-	-
Design of optical interface for optical waveguide at 100 Mbit/s	BFOC sockets (multimode up to 5 km)	BFOC port (singlemode up to 26 km)	-	-
Connectable optical power relative to 1 mW
of the transmitter output	-19 … -14 dB	-15 … -7 dB	- -	- -
of the receiver input maximum	-	-	-	-
Optical sensitivity relative to 1 mW of the receiver input minimum	-34 dB	-34 dB	-	-
Attenuation of fiber-optic cable transmission link minimum necessary	0 dB	0 dB	-	-
Range at the optical interface depending on the optical fiber used	0 … 5 km	0 … 26 km	- -	- -
design of the removable storage C-PLUG	Yes	Yes	Yes	Yes
Inputs/outputs
Operating current of signaling contacts at AC maximum	-	-	-	-
Operating voltage of signaling contacts at DC rated value	24 V	24 V	24 V	24 V
Operating current of signaling contacts at DC maximum	0.1 A	0.1 A	0.1 A	0.1 A
Supply voltage, current consumption, power loss
Type of voltage of supply voltage	DC	DC	DC	DC
Supply voltage external	24 V	24 V	24 V	24 V
minimum	18 V	18 V	18 V	18 V
maximum	32 V	32 V	32 V	32 V
Product component fusing at power supply input	Yes	Yes	Yes	Yes
Type of fusing at input for supply voltage
Consumed current maximum	0.33 A	0.33 A	0.24 A	0.35 A
Active power loss at 24 V for DC	7.92 W	7.92 W	5.76 W	8.4 W
Permitted ambient conditions
Ambient temperature
during operating	-40 … +60 °C	-40 … +60 °C	-40 … +60 °C	-40 … +60 °C
during storage	-40 … +70 °C	-40 … +70 °C	-40 … +70 °C	-40 … +70 °C
during transport	-40 … +70 °C	-40 … +70 °C	-40 … +70 °C	-40 … +70 °C
Comment	-	-	-	-
Relative humidity at 25 °C without condensation during operating maximum	95 %	95 %	95 %	95 %
Protection class IP	IP30	IP30	IP30	IP30
Design, dimensions and weight
Design	Compact	Compact	Compact	Compact
Width	120 mm	120 mm	120 mm	180 mm
Height	125 mm	125 mm	125 mm	125 mm
Depth	124 mm	124 mm	124 mm	124 mm
Net weight	1.2 kg	1.2 kg	1.2 kg	1.6 kg
Type of mounting
35 mm DIN rail mounting	Yes	Yes	Yes	Yes
wall mounting	Yes	Yes	Yes	Yes
S7-300 rail mounting	Yes	Yes	Yes	Yes
Type of mounting	-	-	-	-
Product properties, functions, componentsgeneral
Cascading in the case of a redundant ring at reconfiguration time of <'~0.3'~s	50	50	50	50
Cascading in cases of star structuring	Any (depending only on signal propagation time)	Any (depending only on signal propagation time)	Any (depending only on signal propagation time)	Any (depending only on signal propagation time)
Product functionsmanagement, configuration
Product function
CLI	Yes	Yes	Yes	Yes
web-based management	Yes	Yes	Yes	Yes
MIB support	Yes	Yes	Yes	Yes
TRAPs via email	Yes	Yes	Yes	Yes
Configuration with STEP 7	Yes	Yes	Yes	Yes
SMTP server	Yes	Yes	Yes	Yes
Port mirroring	Yes	Yes	Yes	Yes
for IRT PROFINET IO switch	No	No	No	No
PROFINET IO diagnosis	Yes	Yes	Yes	Yes
switch-managed	Yes	Yes	Yes	Yes
Protocol is supported
Telnet	Yes	Yes	Yes	Yes
HTTP	Yes	Yes	Yes	Yes
HTTPS	Yes	Yes	Yes	Yes
TFTP	Yes	Yes	Yes	Yes
FTP	Yes	Yes	Yes	Yes
BOOTP	No	No	No	No
SNMP v1	Yes	Yes	Yes	Yes
SNMP v2	Yes	Yes	Yes	Yes
SNMP v3	Yes	Yes	Yes	Yes
DCP	Yes	Yes	Yes	Yes
LLDP	Yes	Yes	Yes	Yes
Identification & maintenance
I&M0 - device-specific information	Yes	Yes	Yes	Yes
I&M1 - plant identification/location name	Yes	Yes	Yes	Yes
Product functionsDiagnosis
Product function
Port diagnostics	Yes	Yes	Yes	Yes
Statistics Packet Size	Yes	Yes	Yes	Yes
Statistics packet type	Yes	Yes	Yes	Yes
Error statistics	Yes	Yes	Yes	Yes
Product functionsDHCP
Product function DHCP client	Yes	Yes	Yes	Yes
Product functionsRedundancy
Product function
Ring redundancy	Yes	Yes	Yes	Yes
Redundancy manager	Yes	Yes	Yes	Yes
Standby redundancy	No	No	No	No
HSR redundancy protocol	Yes	Yes	Yes	Yes
MRP redundancy protocol	Yes	Yes	Yes	Yes
redundancy procedure PRP	-	-	-	-
Passive listening	Yes	Yes	Yes	Yes
Protocol is supported PRP	-	-	-	-
Product functionsSecurity
Protocol is supported SSH	Yes	Yes	Yes	Yes
Product functionsTime
Product function SICLOCK support	Yes	Yes	Yes	Yes
Protocol is supported
NTP	No	No	No	No
SNTP	Yes	Yes	Yes	Yes
Standards, specifications, approvals
Standard
for EMC from FM	FM3611: Class 1, Division 2, Group A, B, C, D / T4, CL.1, Zone 2, GP. IIC, T4	FM3611: Class 1, Division 2, Group A, B, C, D / T4, CL.1, Zone 2, GP. IIC, T4	FM3611: Class 1, Division 2, Group A, B, C, D / T4, CL.1, Zone 2, GP. IIC, T4	FM3611: Class 1, Division 2, Group A, B, C, D / T4, CL.1, Zone 2, GP. IIC, T4
for hazardous zone	EN 60079-0 : 2006, EN 60079-15: 2005, II 3 G Ex nA II T4 KEMA 07 ATEX 0145X	EN 60079-0 : 2006, EN 60079-15: 2005, II 3 G Ex nA II T4 KEMA 07 ATEX 0145X	EN 60079-0 : 2006, EN 60079-15: 2005, II 3 G Ex nA II T4 KEMA 07 ATEX 0145X	EN 60079-0 : 2006, EN 60079-15: 2005, II 3 G Ex nA II T4 KEMA 07 ATEX 0145X
for safety of CSA and UL	UL 60950-1, CSA C22.2 No. 60950-1	UL 60950-1, CSA C22.2 No. 60950-1	UL 60950-1, CSA C22.2 No. 60950-1	UL 60950-1, CSA C22.2 No. 60950-1
for hazardous area of CSA and UL	ANSI / ISA 12.12.01, CSA C22.2 No. 213-M1987, CL. 1 / Div. 2 / GP. A, B, C, D T4, CL. 1 / Zone 2 / GP. IIC, T4	ANSI / ISA 12.12.01, CSA C22.2 No. 213-M1987, CL. 1 / Div. 2 / GP. A, B, C, D T4, CL. 1 / Zone 2 / GP. IIC, T4	ANSI / ISA 12.12.01, CSA C22.2 No. 213-M1987, CL. 1 / Div. 2 / GP. A, B, C, D T4, CL. 1 / Zone 2 / GP. IIC, T4	ANSI / ISA 12.12.01, CSA C22.2 No. 213-M1987, CL. 1 / Div. 2 / GP. A, B, C, D T4, CL. 1 / Zone 2 / GP. IIC, T4
for emitted interference	EN 61000-6-4:2001 (Class A)	EN 61000-6-4:2001 (Class A)	EN 61000-6-4:2001 (Class A)	EN 61000-6-4:2001 (Class A)
for interference immunity	EN 61000-6-2:2001	EN 61000-6-2:2001	EN 61000-6-2:2001	EN 61000-6-2:2001
Verification of suitability	EN 61000-6-2:2001, EN 61000-6-4:2001	EN 61000-6-2:2001, EN 61000-6-4:2001	EN 61000-6-2:2001, EN 61000-6-4:2001	EN 61000-6-2:2001, EN 61000-6-4:2001
CE mark	Yes	Yes	Yes	Yes
C-Tick	Yes	Yes	Yes	Yes
Railway application in accordance with EN 50155	No	No	No	No
Railway application in accordance with EN 50124-1	No	No	No	No
Marine classification association
American Bureau of Shipping Europe Ltd. (ABS)	Yes	Yes	Yes	Yes
Bureau Veritas (BV)	Yes	Yes	Yes	Yes
Det Norske Veritas (DNV)	Yes	Yes	Yes	Yes
Germanische Lloyd (GL)	Yes	Yes	Yes	Yes
Lloyds Register of Shipping (LRS)	Yes	Yes	Yes	Yes
Nippon Kaiji Kyokai (NK)	Yes	Yes	Yes	Yes
Marine classification association/ Polski Rejestr Statkow (PRS)	No	No	No	No