Power supply

• Control voltage

1 ... 10 V

• Maximum control current

50 mA

• Load connection

2 A

Protection against short circuit

through miniature fuse (1)
(there is a spare fuse on the fuse holder)

Switching capacity

• Number of load output ballasts

depending on the remote control switch or installation contactor selected

• Number of control output ballasts

• Osram DIMM-ECG

max.50

• Notes

• ballasts have high starting currents: a power relay must be used if there are more than six ballasts to be switched
• use only ballasts and fluorescent lamps from the same manufacturer

Connections

Four screw-type terminals with anti-slip terminal body
The following conductor/cross-sections are permissible:

• 0.5 ... 4.0 mm? solid
• 0.5 ... 2.5 mm? finely stranded, with or without end sleeve (without insulating collar, gas-tight crimp connection)

Mechanical specifications

• Enclosure

plastic

• Dimensions

hole pitch: 71 mm x 71 mm, mounting depth: 32 mm

• Weight

approx. 55 g

• Fire load

approx. 1000 kJ

• Mounting

installation in switch and socket boxes 60 mm O, 40 mm deep complies with DIN 49073-1

Electrical safety

• Degree of soiling (in compliance with IEC 60664-1)

2

• Degree of protection (in compliance with EN 60529)

IP20

• Overvoltage category (in compliance with IEC 60664-1)

III

• Standard

complies with EN 60669-2-1

EMC requirements

complies with EN 60669-2-1

Environmental conditions

• Ambient temperature in operation

-5 ... +45 °C

• Storage temperature

-25 ... +70 °C

• Relative humidity (not condensing)

5 ... 93 %

Certification

VDE approved and KEMA-approved