Supply voltage | |
Rated value (DC) | 24 V |
Reverse polarity protection | Yes |
Load voltage 2L+ | |
| 24 V |
| Yes |
| Yes; against destruction; load increasing |
Input current | |
from supply voltage 1L+, max. | 40 mA |
from load voltage 2L+ (without load), max. | 20 mA |
from backplane bus 3.3 V DC, max. | 20 mA |
Encoder supply | |
Number of outputs | 4 |
Short-circuit protection | Yes; per module, electronic |
Output current | |
| 2 A |
Power loss | |
Power loss, typ. | 2.6 W |
IO-Link | |
Number of ports | 4 |
| 4 |
IO-Link protocol 1.0 | Yes |
IO-Link protocol 1.1 | Yes |
Transmission rate | 4.8 kBaud (COM1); 38.4 kBaud (COM2), 230.4 kBaud (COM3) |
Size of process data, input per port | 32 byte |
Size of process data, input per module | 32 byte |
Size of process data, output per port | 32 byte |
Size of process data, output per module | 32 byte |
Memory size for device parameter | 2 kbyte; for each port |
Master backup | Possible with function block IO_LINK_MASTER |
Cable length unshielded, max. | 20 m |
Operating modes | |
| Yes |
| Yes |
| Yes; max. 100 mA |
Connection of IO-Link devices | |
| Yes; via 3-core cable |
| Yes; Additional device supply: for X1 and X2 max. 2 A in total, for X3 and X4 max. 2 A in total |
Interrupts/diagnostics/status information | |
Diagnostic functions | Yes |
Alarms | |
| Yes |
Diagnostic messages | |
| Yes |
| Yes |
| Yes |
Diagnostics indication LED | |
| Yes; One green LED for channel status Qn (SIO mode) and port status IO-Ln (IO-Link mode) |
| Yes |
| Yes; combined with the IO-Link port status |
Parameter | |
Diagnostics wire break | channel by channel |
Diagnostics short-circuit | channel by channel |
Potential separation | |
between the load voltages | Yes |
between backplane bus and all other circuit components | Yes |
Potential separation channels | |
| No |
Isolation | |
Isolation tested with | 707 V DC (type test) |
Dimensions | |
Width | 45 mm |
Height | 130 mm |
Depth | 35 mm |
Weights | |
Weight, approx. | 150 g |
