Bore specifications

Additional identification code with order codes for bore specifications (no letter "-Z" required)

Identification codes with order codes have been specified for the bore specifications.

A bore is ordered by specifying the digit 9 in the 11th and 12th places of the article number and by adding the appropriate order codes for ?D1 and ?D2 from the table below.

Unless a different bore tolerance is specified, H7 is selected for all metric bore diameters.

To order a bore diameter other than the values stated in the table, the digit 9 must be specified in the 11th and/or 12th place of the article number; in addition, the letter "-Z" must be added to the article number as well as the order code L9Y with plain text for the left-hand hub and/or order code M9Y with plain text for the right-hand hub.

Unless a different bore tolerance is specified, H7 is selected for all imperial bore diameters.

Additional identification code with order code for shaft distances (no letter "Z" required.

Order specification with order code Q0Y has been specified for the shaft distance.

Shaft distance is ordered by specifying the letter Z in the 15th place of the article number, adding order code Q0Y and providing additional information in plain text for dimension S (shaft distance).

Ordering example:

SIPEX SHH-W coupling, size 60
Shaft distance S = 1000 mm
Total length LG = 1044 mm
Bore ?D1 24 H7?
Bore ?D2 28 H7

Article-No.:
2LC0591-1AH99-0AZ0
L0P+M0R+Q0Y
Plain text for Q0Y: = 1000 mm