F digital output module . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на F digital output module

| | | | |

F digital output module

Article number		6ES7526-2BF00-0AB0
		ET 200MP, F-DQ 8X24VDC 2A PPM
General information
Product type designation		F-DQ 8x24VDC/2A PPM
Product function
? I&M data		Yes; I&M0 to I&M3
Engineering with
? STEP 7 TIA Portal configurable/integrated as of version		V13 SP1 with HSP0086
Operating mode
? DQ		Yes
Supply voltage
Type of supply voltage		24 V DC
Rated value (DC)		24 V
Reverse polarity protection		Yes
Digital outputs
Number of digital outputs		8
Current-sinking		Yes
Current-sourcing		Yes
Short-circuit protection		Yes
Open-circuit detection		Yes
Overload protection		Yes
Limitation of inductive shutdown voltage to		PM-switching: -24 V + (-47 V), PP-switching: -24 V
Switching capacity of the outputs
? with resistive load, max.		2 A
? on lamp load, max.		10 W
Load resistance range
? lower limit		12 ?
? upper limit		2 000 ?
Output voltage
? Type of output voltage		DC
? for signal "1", min.		24 V; L+ (-0.5 V)
Output current
? for signal "1" rated value		2 A
? for signal "0" residual current, max.		0.5 mA; Current-sourcing, or current sourcing and sinking switches individually, current sinking: max. 1 mA
Switching frequency
? with resistive load, max.		30 Hz
? with inductive load, max.		0.1 Hz
? on lamp load, max.		10 Hz
Total current of the outputs
? Current per channel, max.		2 A
Total current of the outputs (per module)
horizontal installation
— up to 40 °C, max.		16 A
— up to 60 °C, max.		8 A
vertical installation
— up to 40 °C, max.		8 A
Cable length
? shielded, max.		1 000 m
? unshielded, max.		500 m
Interrupts/diagnostics/status information
Diagnostics function		Yes
Substitute values connectable		No
Alarms
? Diagnostic alarm		Yes
Diagnostic messages
? Monitoring the supply voltage		Yes
? Wire-break		Yes
? Short-circuit		Yes
? Group error		Yes
Diagnostics indication LED
? RUN LED		Yes; Green LED
? ERROR LED		Yes; Red LED
? Monitoring of the supply voltage (PWR-LED)		Yes
? Channel status display		Yes; Green LED
? for channel diagnostics		Yes; Red LED
? for module diagnostics		Yes; Red LED
Potential separation
Potential separation channels
? between the channels and backplane bus		Yes
Isolation
Isolation tested with		707 V DC (type test)
Standards, approvals, certificates
Suitable for safety functions		Yes
Highest safety class achievable in safety mode
? Performance level according to ISO 13849-1		PLe
? SIL acc. to IEC 61508		SIL 3
Probability of failure (for service life of 20 years and repair time of 100 hours)
— Low demand mode: PFDavg in accordance with SIL3		< 6.00E-05
— High demand/continuous mode: PFH in accordance with SIL3		< 2.00E-09 1/h
Ambient conditions
Ambient temperature during operation
? horizontal installation, min.		0 °C
? horizontal installation, max.		60 °C
? vertical installation, min.		0 °C
? vertical installation, max.		40 °C
Dimensions
Width		35 mm
Height		147 mm
Depth		129 mm
Weights
Weight, approx.		300 g