|
| | | |
UP 5.. - Switch actuatorUP 5.. Switch actuator - Rated contact voltage AC 230 V
- 2 binary inputs for potential-free contacts
- 20 cm long wires for connecting phase conductor, output, inputs and bus
- Output to be configured as NO or NC contact
- Selectable preferred output state at bus voltage failure and recovery
- Switching status object
- Selectable additional functions:
- On/off delay
- Time-switch
- Logic operation, function forced positioning
- Selectable function of the binary inputs:
- Acting as secondary inputs directly on the switching outputs or acting as independant binary inputs with bus communication
- Free allocation of the functions switching, dimming, solar protection control, send value and scene control to the inputs
- Two independent switching objects per input
- Blocking object for each input
- Separately selectable behaviour per input at bus voltage recovery
- Telegram rate limitation for both inputs
- Integrated bus coupling units, bus-powered electronics
- Enclosed bus terminal for bus connection
- Installation in a flush-mounting wall or ceiling box with o 60 mm
|
|
