1-phase, 24 V DC (for S7-300 and ET200M) . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на 1-phase, 24 V DC (for S7-300 and ET200M)

| | | | | |

1-phase, 24 V DC (for S7-300 and ET200M)

Article number	6AG1305-1BA80-2AA0	6AG1307-1EA01-7AA0	6AG1307-1KA02-7AA0
	SIPLUS PS S7-300 PS305 (EN50155)	SIPLUS PS307 AC 120/230V / DC 24 V/5 A	SIPLUS_PS307_10A
Supply voltage
Rated value (DC)
? 24 V DC	Yes
? 48 V DC	Yes
? 72 V DC	Yes
? 96 V DC	Yes
? 120 V DC	Yes; Rated value 110 V DC
permissible range, lower limit (DC)	16.8 V
permissible range, upper limit (DC)	138 V
Rated value (AC)
? 120 V AC		Yes; 85 to 132 V AC	Yes; 85 to 132 V AC
? 230 V AC		Yes; 170 to 264 V AC	Yes; 170 to 264 V AC
Overvoltage strength		2.3x Ue rated, 1.3 ms	2.3x Ue rated, 1.3 ms
Line frequency
? permissible range, lower limit		47 Hz	47 Hz
? permissible range, upper limit		63 Hz	63 Hz
Mains buffering
? Mains/voltage failure stored energy time	10 ms; Corresponds to S2 of EN 50155	20 ms; min., for Ia rated	20 ms; min., for Ia rated and Ue = 93 / 187 V
? Repeat rate, min.	1 s	1 s	1 s
Input current
Rated value at 24 V DC	2.7 A
Rated value at 48 V DC	1.3 A
Rated value at 72 V DC	0.9 A
Rated value at 96 V DC	0.65 A
Rated value at 110 V DC	0.6 A
Rated value at 120 V AC		2.3 A	4.2 A
Rated value at 230 V AC		1.2 A	1.9 A
Inrush current, max.	20 A	20 A; max. at 25 °C, duration max. 3 ms	55 A; max. at 25 °C, duration max. 3 ms
I?t	5 A?·s	1.2 A?·s	3.3 A?·s
Leakage current, typ.	0.7 mA	0.5 mA	0.6 mA
Leakage current, max.	3.5 mA	3.5 mA	3.5 mA
Overcurrent overload capability	270 ms on short circuit during startup and operation		80 ms on short circuit during startup and operation
Output voltage
Rated value (DC)	24 V	24 V	24 V; stable at no-load max. 2.5 s
permissible range, lower limit (DC)	23.27 V	23.27 V	23.27 V
permissible range, upper limit (DC)	24.72 V	24.72 V	24.72 V
Power up time, max.	3 s	2 s	2 s
Voltage rise time, typ.		10 ms	10 ms
Overvoltage protection		Additional control circuit, cutoff at < 28.8 V, automatic restart	Additional control circuit, cutoff at < 28.8 V, automatic restart
Short-circuit strength		electronic trip, automatic restart	electronic trip, automatic restart
Residual ripple, typ.	30 mV; Peak - peak	10 mV; Peak - peak	15 mV; Peak - peak
Residual ripple, max.	150 mV; Peak - peak	50 mV; Peak - peak	50 mV; Peak - peak
Output current
Current output (rated value)	2 A; 2 for connection in parallel	5 A; 3 A @ > 60 °C, can be switched in parallel	10 A; 7 A @ > 60 °C, can be switched in parallel
Short-circuit protection	Yes; Electronic		Yes; Electronic
Continuous short-circuit current, max.			12 A
Power
Active power input, typ.	64 W	138 W	240 W
Efficiency	75 %		90 %; approx., at Ua rated, Ia rated
Power loss
Power loss, typ.	16 W	18 W; approx., at Ua rated, Ia rated	27 W; approx., at Ua rated, Ia rated
Interrupts/diagnostics/status information
Diagnostics indication LED
? Output voltage 24 V DC (green)	Yes; OK for 24 V	Yes; OK for 24 V	Yes; OK for 24 V
Potential separation
primary/secondary	Yes; SELV output voltage Ua according to EN 60950-1 and EN 50178	Yes; SELV output voltage Ua according to EN 60950-1 and EN 50178	Yes; SELV output voltage Ua according to EN 60950-1 and EN 50178
SELV		Yes	Yes
Isolation
Isolation tested with	Rated insulation voltage (24 V against input): 150 V AC tested with: 2800 V DC	Rated insulation voltage (24 V against L1) 250 V AC, tested with 4 200 V DC	Rated insulation voltage (24 V against L1) 250 V AC, tested with 4 200 V DC
EMC
EMC interference immunity	EN 61000-6-2	EN 61000-6-2	EN 61000-6-2
EMC interference emission	EN 55011 Class A	EN 55022 Class B	EN 55022 Class B
Degree and class of protection
IP degree of protection	IP20	IP20	IP20
Protection class	1	1	1; with protective conductor
Standards, approvals, certificates
CE mark	Yes	Yes	Yes
Standard for line harmonics limit		EN 61000-3-2	EN 61000-3-2
Railway application
? EN 50155	Yes; T1 Category 1 Class A/B horizontal mounting position
Ambient conditions
Ambient temperature during operation
? min.	-25 °C; = Tmin	-25 °C; = Tmin	-25 °C; = Tmin
? max.	70 °C; = Tmax; for use on railway vehicles according to EN 50155, the rated temperature range -25 ... +55 °C (T1) or 60 °C @ UL/UL hazardous use applies	70 °C; = Tmax; 60 °C @ UL/cUL, ATEX and FM use	70 °C; = Tmax; 60 °C @ UL/cUL, ATEX and FM use
Extended ambient conditions
? relative to ambient temperature-atmospheric pressure-installation altitude	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m)	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m)
Relative humidity
— With condensation, tested in accordance with IEC 60068-2-38, max.	100 %; RH incl. condensation/frost (no commissioning under condensation conditions)	100 %; RH incl. condensation/frost (no commissioning under condensation conditions)	100 %; RH incl. condensation/frost (no commissioning under condensation conditions)
Resistance
— against biologically active substances / conformity with EN 60721-3-3	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!
— against chemically active substances / conformity with EN 60721-3-3	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!
— against mechanically active substances / conformity with EN 60721-3-3	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!
Dimensions
Width	80 mm	60 mm	80 mm
Height	125 mm	125 mm	125 mm
Depth	120 mm	120 mm	120 mm
Weights
Weight, approx.	740 g	0.6 kg	0.8 kg

skener.ru

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Бесконтактные выключатели Конечные выключатели Оптические датчики Энкодеры

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FS - Установка умягчения

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FK - Установка обезжелезивания