The product suite for optimal adaptation of the SINUMERIK to the machine tool

Machine tool manufacturers want to expand the technological functionality of intelligent machines, and to adapt the operation of the machine optimally to its technology. Siemens has the answer to these requirements with the SINUMERIK Integrate for engineering product suite.

The scope of functions of the SINUMERIK NCU can be expanded with compile cycles. A range of standard compile cycles is available for this purpose. Possibilities have been created to support, for example, special kinematics and special compensations. SINUMERIK Integrate Create MyCC supports the creation of manufacturer-specific NCK functions.

The openness in the HMI enables full access to all relevant data of the SINUMERIK NCU, PLC and drives. The operation of SINUMERIK Operate can be adapted in different ways:

• By configuring prepared screen forms, such as SINUMERIK Integrate Create MyHMI /PRO
• By configuring with standard tools, such as SINUMERIK Integrate Create MyHMI /WinCC
• By programming based on C++, .Net or Qt with SINUMERIK Integrate Create MyHMI /3GL

Remote data access is possible via the OPC UA protocol with SINUMERIK Integrate Access MyMachine /OPC UA.

Extensive support for commissioning is offered by, e.g., SINUMERIK Integrate Create MyConfig, SINUMERIK Integrate Access MyMachine /P2P, SinuCom or SIMATIC STEP 7.

The SINUMERIK Integrate Run MyRobot product suite offers optimal integration of robots in machines for handling or machining tasks.

SINUMERIK Integrate Run MyVNCK offers user-side support – the link to a virtual NC kernel in a CAM system. You can protect the technological know-how of your cycles with SINUMERIK Integrate Lock MyCycles.

SINUMERIK Integrate for engineering