CM 4x IO-Link . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на CM 4x IO-Link

| | | | | |

CM 4x IO-Link

Article number		6ES7137-6BD00-0BA0
		ET 200SP, CM 4 X IO-LINK ST
General information
Product type designation		ET 200SP, CM 4xIO-Link
Product function
? I&M data		Yes
Engineering with
? STEP 7 TIA Portal configurable/integrated as of version		V13 / V13
? STEP 7 configurable/integrated as of version		V5.5 / -
? PROFIBUS as of GSD version/GSD revision		GSD Revision 5
? PROFINET as of GSD version/GSD revision		V2.3 / -
Supply voltage
Rated value (DC)		24 V
Reverse polarity protection		Yes
Input current
Current consumption, max.		45 mA; without load
Encoder supply
Number of outputs		4
Output current
? Rated value		200 mA
Power loss
Power loss, typ.		1 W
Isochronous mode
Equidistance		Yes
Interrupts/diagnostics/status information
Diagnostics function		Yes
Alarms
? Diagnostic alarm		Yes; The port diagnosis is available in the IO-Link mode only.
Diagnostic messages
? Monitoring the supply voltage		Yes
Diagnostics indication LED
? Monitoring of the supply voltage (PWR-LED)		Yes; green PWR LED
? Channel status display		Yes; one green LED for channel status Qn (SIO mode) and port status Cn (IO-Link mode) per channel
? for channel diagnostics		Yes; red Fn LED
? for module diagnostics		Yes; green/red DIAG LED
Potential separation
Potential separation channels
? between the channels		No
? between the channels and backplane bus		Yes
Isolation
Isolation tested with		707 V DC (type test)
Dimensions
Width		15 mm
Weights
Weight, approx.		30 g