The SIPROTEC 4 7SJ63 unit is a numerical protection relay that also performs control and monitoring functions and therefore supports the user in cost-effective power system management, and ensures reliable supply of electric power to the customers. Local operation has been designed according to ergonomic criteria. A large, easy-to-read graphic display was a major design aim.

Control

The integrated control function permits control of disconnect devices (electrically operated/motorized switches) or circuitbreakers via the integrated operator panel, binary inputs, DIGSI 4 or the control and protection system (e.g. SICAM). The present status (or position) of the primary equipment can be displayed. 7SJ63 supports substations with single and duplicate busbars. The number of elements that can be controlled (usually 1 to 5) is only restricted by the number of inputs and outputs available. A full range of command processing functions is provided.

Programmable logic

The integrated logic characteristics (CFC) allow the user to implement their own functions for automation of switchgear (interlocking) or a substation via a graphic user interface. The user can also generate user-defined messages.

Line protection

The 7SJ63 units can be used for line protection of high and medium-voltage networks with earthed (grounded), lowresistance grounded, isolated or compensated neutral point.

Motor protection

When protecting motors, the 7SJ63 relays are suitable for asynchronous machines of all sizes.

Transformer protection

The 7SJ63 units perform all functions of backup protection supplementary to transformer differential protection. The inrush suppression effectively prevents tripping by inrush currents. The high-impedance restricted ground-fault protection detects short-circuits and insulation faults on the transformer.

Backup protection

The relays can be used universally for backup protection.

Metering values

Extensive measured values, limit values and metering values permit improved systems management.