SIMATIC ET 200eco PN . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на SIMATIC ET 200eco PN

| | | | | | |

ET 200eco PN

Article number	6ES7141-6BF00-0AB0	6ES7141-6BG00-0AB0	6ES7141-6BH00-0AB0
	ET200ECO PN, 8DI, DC24V, 4XM12	ET200ECO PN, 8DI, DC24V, 8XM12	ET200ECO PN, 16DI, DC24V, 8XM12
General information
Vendor identification (VendorID)	002AH	002AH	002AH
Device identifier (DeviceID)	0306H	0306H	0306H
Supply voltage
Rated value (DC)	24 V	24 V	24 V
Reverse polarity protection	Yes	Yes	Yes
Input current
Current consumption, typ.	100 mA	100 mA	100 mA
Encoder supply
Number of outputs	4	8	8
Short-circuit protection	Yes; Electronic	Yes; Electronic	Yes; Electronic
Output current
? Rated value	100 mA; per output	100 mA; per output	100 mA; per output
Power loss
Power loss, typ.	5.5 W	4.5 W	6.5 W
Digital inputs
Number of digital inputs	8	8	16
? in groups of	2	1	2
Input characteristic curve in accordance with IEC 61131, type 3	Yes	Yes	Yes
Number of simultaneously controllable inputs
all mounting positions
— up to 60 °C, max.	8	8	16
Input voltage
? Type of input voltage	DC	DC	DC
? Rated value (DC)	24 V	24 V	24 V
? for signal "0"	-3 to +5V	-3 to +5V	-3 to +5V
? for signal "1"	+11 to +30V	+11 to +30V	+11 to +30V
Input current
? for signal "1", typ.	7 mA	7 mA	7 mA
Input delay (for rated value of input voltage)
for standard inputs
— at "0" to "1", max.	typically 3 ms	typically 3 ms	typically 3 ms
— at "1" to "0", max.	typically 3 ms	typically 3 ms	typically 3 ms
Cable length
? unshielded, max.	30 m	30 m	30 m
Encoder
Connectable encoders
? 2-wire sensor	Yes	Yes	Yes
— permissible quiescent current (2-wire sensor), max.	1.5 mA	1.5 mA	1.5 mA
Interfaces
Transmission procedure	100BASE-TX	100BASE-TX	100BASE-TX
Number of PROFINET interfaces	1	1	1
PROFINET IO
? Autocrossing	Yes	Yes	Yes
? automatic detection of transmission rate	Yes	Yes	Yes
? Transmission rate, max.	100 Mbit/s	100 Mbit/s	100 Mbit/s
? integrated switch	Yes	Yes	Yes
PROFINET IO Device
— IRT with the option "high flexibility"	Yes	Yes	Yes
— Prioritized startup	Yes	Yes	Yes
Protocols
Supports protocol for PROFINET IO	Yes	Yes	Yes
PROFINET CBA	No	No	No
PROFIsafe	No	No	No
Protocols (Ethernet)
? TCP/IP	No	No	No
? SNMP	Yes	Yes	Yes
? DCP	Yes	Yes	Yes
? LLDP	Yes	Yes	Yes
? ping	Yes	Yes	Yes
? ARP	Yes	Yes	Yes
Interrupts/diagnostics/status information
Status indicator	Yes; Green LED	Yes; Green LED	Yes; Green LED
Diagnostic functions	Yes	Yes	Yes
Alarms
? Diagnostic alarm	Yes	Yes	Yes
Diagnostic messages
? Diagnostic information readable	Yes	Yes	Yes
? Monitoring the supply voltage	Yes; Green "ON" LED	Yes; Green "ON" LED	Yes; Green "ON" LED
? Wire-break in signal transmitter cable	Yes	Yes	Yes
? Short-circuit encoder supply	Yes; Per channel group	Yes; Per channel group	Yes; Per channel group
? Group error	Yes; Red/yellow "SF/MT" LED	Yes; Red/yellow "SF/MT" LED	Yes; Red/yellow "SF/MT" LED
Potential separation
between the load voltages	Yes	Yes	Yes
between load voltage and all other switching components	No	No	No
between Ethernet and electronics	Yes	Yes	Yes
Potential separation digital inputs
? between the channels	No	No	No
Isolation
tested with
? 24 V DC circuits	707 V DC (type test)	707 V DC (type test)	707 V DC (type test)
? Interface	1 500 V; According to IEEE 802.3	1 500 V; According to IEEE 802.3	1 500 V; According to IEEE 802.3
Degree and class of protection
IP degree of protection	IP65/67	IP67	IP67
Connection method
Design of electrical connection	4/5-pin M12 circular connectors	4/5-pin M12 circular connectors	4/5-pin M12 circular connectors
Dimensions
Width	30 mm	60 mm	60 mm
Height	200 mm	175 mm	175 mm
Depth	49 mm	49 mm	49 mm
Weights
Weight (without packaging)	550 g	910 g	910 g

Article number	6ES7142-6BF50-0AB0	6ES7142-6BF00-0AB0	6ES7142-6BG00-0AB0	6ES7142-6BR00-0AB0	6ES7142-6BH00-0AB0
	ET200ECO PN, 8DO, DC24V/0,5A, 4XM12	ET200ECO PN, 8DO, DC24V/1,3A, 4XM12	ET200ECO PN, 8DO, DC24V/1,3A, 8XM12	ET200ECO PN, 8 DO, DC24V/2A, 8XM12	ET200ECO PN, 16DO DC24V/1,3A, 8XM12
General information
Vendor identification (VendorID)	002AH	002AH	002AH	002AH	002AH
Device identifier (DeviceID)	0306H	0306H	0306H	0306H	0306H
Supply voltage
Rated value (DC)	24 V	24 V	24 V	24 V	24 V
Reverse polarity protection	Yes	Yes	Yes	Yes	Yes
Load voltage 2L+
? Rated value (DC)	24 V	24 V	24 V	24 V	24 V
? Reverse polarity protection	Yes	Yes	Yes	Yes	Yes
Input current
Current consumption, typ.	100 mA	100 mA	100 mA	100 mA	100 mA
from supply voltage 1L+, max.	4 A	4 A	4 A	4 A	4 A
from load voltage 2L+, max.	4 A	4 A	4 A	4 A	4 A
Power loss
Power loss, typ.	3 W	5.5 W	5.5 W	5 W	5.5 W
Digital outputs
Number of digital outputs	8	8	8	8	16
? in groups of	8	4	4	4	8
Short-circuit protection	Yes	Yes	Yes	Yes	Yes
? Response threshold, typ.	0.7 A	1.8 A	1.8 A	2.8 A	1.8 A
Limitation of inductive shutdown voltage to	Typ. (L1+, L2+) -47 V	Typ. (L1+, L2+) -47 V	Typ. (L1+, L2+) -47 V	Typ. (L1+, L2+) -47 V	Typ. (L1+, L2+) -47 V
Controlling a digital input	Yes	Yes	Yes	Yes	Yes
Switching capacity of the outputs
? on lamp load, max.	5 W	5 W	5 W	10 W	5 W
Output current
? for signal "1" rated value	0.5 A	1.3 A; Maximum	1.3 A; Maximum	2 A	1.3 A; Maximum
? for signal "0" residual current, max.	1.5 mA	1.5 mA	1.5 mA	1.5 mA	1.5 mA
Parallel switching of two outputs
? for uprating	No	No	No	No	No
? for redundant control of a load	Yes	Yes	Yes	Yes	Yes
Switching frequency
? with resistive load, max.	100 Hz	100 Hz	100 Hz	100 Hz	100 Hz
? with inductive load, max.	0.5 Hz	0.5 Hz	0.5 Hz	0.5 Hz	0.5 Hz
? on lamp load, max.	1 Hz	1 Hz	1 Hz	1 Hz	1 Hz
Total current of the outputs (per group)
all mounting positions
— up to 55 °C, max.		3.9 A
— up to 60 °C, max.	4 A	2.6 A	3.9 A	3.9 A	3.9 A
Cable length
? unshielded, max.	30 m	30 m	30 m	30 m	30 m
Interfaces
Transmission procedure	100BASE-TX	100BASE-TX	100BASE-TX	100BASE-TX	100BASE-TX
Number of PROFINET interfaces	1	1	1	1	1
PROFINET IO
? Autocrossing	Yes	Yes	Yes	Yes	Yes
? automatic detection of transmission rate	Yes	Yes	Yes	Yes	Yes
? Transmission rate, max.	100 Mbit/s	100 Mbit/s	100 Mbit/s	100 Mbit/s	100 Mbit/s
? integrated switch	Yes	Yes	Yes	Yes	Yes
PROFINET IO Device
— IRT with the option "high flexibility"	Yes	Yes	Yes	Yes	Yes
— Prioritized startup	Yes	Yes	Yes	Yes	Yes
Protocols
Supports protocol for PROFINET IO	Yes	Yes	Yes	Yes	Yes
PROFINET CBA	No	No	No	No	No
PROFIsafe	No	No	No	No	No
Protocols (Ethernet)
? TCP/IP	No	No	No	No	No
? SNMP	Yes	Yes	Yes	Yes	Yes
? DCP	Yes	Yes	Yes	Yes	Yes
? LLDP	Yes	Yes	Yes	Yes	Yes
? ping	Yes	Yes	Yes	Yes	Yes
? ARP	Yes	Yes	Yes	Yes	Yes
Interrupts/diagnostics/status information
Status indicator	Yes; Green LED	Yes; Green LED	Yes; Green LED	Yes; Green LED	Yes; Green LED
Diagnostic functions	Yes	Yes	Yes	Yes	Yes
Alarms
? Diagnostic alarm	Yes	Yes	Yes	Yes	Yes
Diagnostic messages
? Diagnostic information readable	Yes	Yes	Yes	Yes	Yes
? Monitoring the supply voltage	Yes; Green "ON" LED	Yes; Green "ON" LED	Yes; Green "ON" LED	Yes; Green "ON" LED	Yes; Green "ON" LED
? Wire-break in actuator cable	Yes	Yes	Yes	Yes	Yes
? Short-circuit	Yes	Yes	Yes	Yes	Yes
? Group error	Yes; Red/yellow "SF/MT" LED	Yes; Red/yellow "SF/MT" LED	Yes; Red/yellow "SF/MT" LED	Yes; Red/yellow "SF/MT" LED	Yes; Red/yellow "SF/MT" LED
Potential separation
between the load voltages	Yes	Yes	Yes	Yes	Yes
between load voltage and all other switching components	No	No	No	No	No
between Ethernet and electronics	Yes	Yes	Yes	Yes	Yes
Potential separation digital outputs
? between the channels	No	No	No	No	No
Isolation
tested with
? 24 V DC circuits	707 V DC (type test)	707 V DC (type test)	707 V DC (type test)	707 V DC (type test)	707 V DC (type test)
? Interface	1 500 V; According to IEEE 802.3	1 500 V; According to IEEE 802.3	1 500 V; According to IEEE 802.3	1 500 V; According to IEEE 802.3	1 500 V; According to IEEE 802.3
Degree and class of protection
IP degree of protection	IP67	IP65/67	IP67	IP67	IP67
Connection method
Design of electrical connection	4/5-pin M12 circular connectors	4/5-pin M12 circular connectors	4/5-pin M12 circular connectors	4/5-pin M12 circular connectors	4/5-pin M12 circular connectors
Dimensions
Width	30 mm	30 mm	60 mm	60 mm	60 mm
Height	200 mm	200 mm	175 mm	175 mm	175 mm
Depth	49 mm	49 mm	49 mm	49 mm	49 mm
Weights
Weight (without packaging)	550 g	550 g	910 g	910 g	910 g

Article number		6ES7147-6BG00-0AB0
		ET200ECO PN, 8 DIO, DC24V/1,3A, 8XM12
General information
Vendor identification (VendorID)		002AH
Device identifier (DeviceID)		0306H
Supply voltage
Rated value (DC)		24 V
Reverse polarity protection		Yes
Load voltage 2L+
? Rated value (DC)		24 V
? Reverse polarity protection		Yes
Input current
Current consumption, typ.		100 mA
from supply voltage 1L+, max.		4 A
from load voltage 2L+, max.		4 A
Encoder supply
Number of outputs		8
Short-circuit protection		Yes; Electronic
Output current
? Rated value		100 mA; per output
Power loss
Power loss, typ.		6.5 W
Digital inputs
Number of digital inputs		8
? in groups of		4
Input characteristic curve in accordance with IEC 61131, type 3		Yes
Number of simultaneously controllable inputs
all mounting positions
— up to 60 °C, max.		8
Input voltage
? Type of input voltage		DC
? Rated value (DC)		24 V
? for signal "0"		-3 to +5V
? for signal "1"		+11 to +30V
Input current
? for signal "1", typ.		7 mA
Input delay (for rated value of input voltage)
for standard inputs
— at "0" to "1", max.		typically 3 ms
— at "1" to "0", max.		typically 3 ms
Cable length
? unshielded, max.		30 m
Digital outputs
Number of digital outputs		8
? in groups of		4
Short-circuit protection		Yes; Electronic
? Response threshold, typ.		1.8 A
Limitation of inductive shutdown voltage to		Typ. (L1+, L2+) -47 V
Controlling a digital input		Yes
Switching capacity of the outputs
? on lamp load, max.		5 W
Output current
? for signal "1" rated value		1.3 A; Maximum
? for signal "0" residual current, max.		1.5 mA
Parallel switching of two outputs
? for uprating		No
? for redundant control of a load		Yes
Switching frequency
? with resistive load, max.		100 Hz
? with inductive load, max.		0.5 Hz
? on lamp load, max.		1 Hz
Total current of the outputs (per group)
all mounting positions
— up to 60 °C, max.		3.9 A
Cable length
? unshielded, max.		30 m
Encoder
Connectable encoders
? 2-wire sensor		Yes
— permissible quiescent current (2-wire sensor), max.		1.5 mA
Interfaces
Transmission procedure		100BASE-TX
Number of PROFINET interfaces		1
PROFINET IO
? Autocrossing		Yes
? automatic detection of transmission rate		Yes
? Transmission rate, max.		100 Mbit/s
? integrated switch		Yes
PROFINET IO Device
— IRT with the option "high flexibility"		Yes
— Prioritized startup		Yes
Protocols
Supports protocol for PROFINET IO		Yes
PROFINET CBA		No
PROFIsafe		No
Protocols (Ethernet)
? TCP/IP		No
? SNMP		Yes
? DCP		Yes
? LLDP		Yes
? ping		Yes
? ARP		Yes
Interrupts/diagnostics/status information
Status indicator		Yes; Green LED
Diagnostic functions		Yes
Alarms
? Diagnostic alarm		Yes
Diagnostic messages
? Diagnostic information readable		Yes
? Monitoring the supply voltage		Yes; Green "ON" LED
? Wire-break in actuator cable		Yes
? Wire-break in signal transmitter cable		Yes
? Short-circuit		Yes
? Short-circuit encoder supply		Yes
? Group error		Yes; Red/yellow "SF/MT" LED
Potential separation
between the load voltages		Yes
between load voltage and all other switching components		No
between Ethernet and electronics		Yes
Potential separation digital inputs
? between the channels		No
Potential separation digital outputs
? between the channels		No
Isolation
tested with
? 24 V DC circuits		707 V DC (type test)
? Interface		1 500 V; According to IEEE 802.3
Degree and class of protection
IP degree of protection		IP65/67
Connection method
Design of electrical connection		4/5-pin M12 circular connectors
Dimensions
Width		60 mm
Height		175 mm
Depth		49 mm
Weights
Weight (without packaging)		910 g

Article number	6ES7144-6KD00-0AB0	6ES7144-6KD50-0AB0
	ET200ECO PN, 8AI; 4 U/I; 4 RTD/TC 8XM12	ET200ECO PN, 8AI RTD/TC 8XM12
General information
Vendor identification (VendorID)	002AH	002AH
Device identifier (DeviceID)	0306H	0306H
Supply voltage
Rated value (DC)	24 V	24 V
Reverse polarity protection	Yes	Yes; against destruction
Input current
Current consumption, typ.	110 mA	110 mA
Encoder supply
Number of outputs	4
Short-circuit protection	Yes; Electronic at 1.4 A
Output current
? Rated value	1 A; Maximum
Power loss
Power loss, typ.	2.8 W	2.8 W
Analog inputs
Number of analog inputs	8	8
? For voltage/current measurement	4
? For resistance/resistance thermometer measurement	4	8
permissible input voltage for voltage input (destruction limit), max.	28.8 V permanent, 35 V for max. 500 ms
Input ranges (rated values), voltages
? 0 to +10 V	Yes
? 1 V to 5 V	Yes
? -10 V to +10 V	Yes
? -80 mV to +80 mV	Yes	Yes
Input ranges (rated values), currents
? 0 to 20 mA	Yes
? -20 mA to +20 mA	Yes
? 4 mA to 20 mA	Yes
Input ranges (rated values), thermocouples
? Type E	Yes	Yes
? Type J	Yes	Yes
? Type K	Yes	Yes
? Type N	Yes	Yes
Input ranges (rated values), resistance thermometer
? Ni 100	Yes	Yes
? Ni 1000	Yes	Yes
? Ni 120	Yes	Yes
? Ni 200	Yes	Yes
? Ni 500	Yes	Yes
? Pt 100	Yes	Yes
? Pt 1000	Yes	Yes
? Pt 200	Yes	Yes
? Pt 500	Yes	Yes
Input ranges (rated values), resistors
? 0 to 150 ohms	Yes	Yes
? 0 to 300 ohms	Yes	Yes
? 0 to 600 ohms	Yes	Yes
? 0 to 3000 ohms	Yes	Yes
Thermocouple (TC)
Temperature compensation
— parameterizable	Yes	Yes
— internal temperature compensation	Yes	Yes
— external temperature compensation with compensations socket	Yes	Yes
— external temperature compensation with Pt100		Yes
— dynamic reference temperature value		Yes
— for definable comparison point temperature		Yes
Cable length
? shielded, max.	30 m	30 m
Analog value generation for the inputs
Analog value display	SIMATIC S7 format	SIMATIC S7 format
Measurement principle	integrating	integrating
Integration and conversion time/resolution per channel
? Resolution (incl. overrange)	15 bit + sign	15 bit + sign
? Integration time, parameterizable	Yes	Yes
? Integration time (ms)	2/16.67/20/100 ms	2/16.67/20/100 ms
? Interference voltage suppression for interference frequency f1 in Hz	500 / 60 / 50 / 10 Hz	500 / 60 / 50 / 10 Hz
? Conversion time (per channel)	4 / 19 / 22 / 102 ms	4 / 19 / 22 / 102 ms
Smoothing of measured values
? parameterizable	Yes	Yes
? Step: None	Yes; 1 x cycle time	Yes; 1 x cycle time
? Step: low	Yes; 4 x cycle time	Yes; 4 x cycle time
? Step: Medium	Yes; 16 x cycle time	Yes; 16 x cycle time
? Step: High	Yes; 64 x cycle time	Yes; 64 x cycle time
Encoder
Number of connectable encoders, max.	8	8
Connection of signal encoders
? for voltage measurement	Yes
? for current measurement as 2-wire transducer	Yes
? for current measurement as 4-wire transducer	Yes
? for resistance measurement with two-wire connection	Yes	Yes
? for resistance measurement with three-wire connection	Yes	Yes
? for resistance measurement with four-wire connection	Yes	Yes
Errors/accuracies
Linearity error (relative to input range), (+/-)	0.01 %	0.01 %
Temperature error (relative to input range), (+/-)	U: 0.0035%/°C; I:0.006%/°C; RTD: 0.0005%/°C; TC: 0.0035%/°C	RTD: 0.0005%/°C; TC: 0.0035%/°C
Crosstalk between the inputs, min.	85 dB	-85 dB
Repeat accuracy in steady state at 25 °C (relative to input range), (+/-)	0.008 %	0.008 %
Interference voltage suppression for f = n x (f1 +/- 1 %), f1 = interference frequency
? Series mode interference (peak value of interference < rated value of input range), min.	46 dB	46 dB
? Common mode interference, min.	70 dB	70 dB
Interfaces
Transmission procedure	100BASE-TX	100BASE-TX
Number of PROFINET interfaces	1	1
PROFINET IO
? Autocrossing	Yes	Yes
? automatic detection of transmission rate	Yes	Yes
? Transmission rate, max.	100 Mbit/s	100 Mbit/s
? integrated switch	Yes	Yes
PROFINET IO Device
— IRT with the option "high flexibility"	Yes
— Prioritized startup	Yes	Yes
Protocols
Supports protocol for PROFINET IO	Yes	Yes
PROFINET CBA	No	No
PROFIsafe	No	No
Protocols (Ethernet)
? TCP/IP	No	No
? SNMP	Yes	Yes
? DCP	Yes	Yes
? LLDP	Yes	Yes
? ping	Yes	Yes
? ARP	Yes	Yes
Interrupts/diagnostics/status information
Status indicator	Yes
Diagnostic functions	Yes	Yes
Alarms
? Diagnostic alarm	Yes	Yes
Diagnostic messages
? Diagnostic information readable	Yes	Yes
? Monitoring the supply voltage	Yes; Green "ON" LED	Yes; Green "ON" LED
? Short-circuit encoder supply	Yes; per module
? Group error	Yes; Red/yellow "SF/MT" LED	Yes; Red/yellow "SF/MT" LED
? Overflow/underflow	Yes	Yes
Potential separation
between the load voltages	Yes	Yes
between load voltage and all other switching components	No	No
between Ethernet and electronics	Yes	Yes
Potential separation analog inputs
? between the channels	No	No
Permissible potential difference
Between the inputs and MANA (UCM)	10 Vpp AC	10 Vpp AC
Isolation
tested with
? 24 V DC circuits	707 V DC (type test)	707 V DC (type test)
? Interface	1 500 V; According to IEEE 802.3	1 500 V; According to IEEE 802.3
Degree and class of protection
IP degree of protection	IP65/67	IP65/67
Connection method
Design of electrical connection	4/5-pin M12 circular connectors	4/5-pin M12 circular connectors
Dimensions
Width	60 mm	60 mm
Height	175 mm	175 mm
Depth	49 mm	49 mm
Weights
Weight (without packaging)	930 g	930 g

Article number		6ES7145-6HD00-0AB0
		ET200ECO PN, 4AO U/I 4XM12
General information
Vendor identification (VendorID)		002AH
Device identifier (DeviceID)		0306H
Supply voltage
Rated value (DC)		24 V
Reverse polarity protection		Yes
Input current
Current consumption, typ.		280 mA
Actuator supply
Number of outputs		4
Short-circuit protection		Yes; Electronic at 1.4 A
Output current
? Rated value		1 A; Maximum
Power loss
Power loss, typ.		5.5 W
Analog outputs
Number of analog outputs		4
Voltage output, short-circuit protection		Yes
Voltage output, short-circuit current, max.		30 mA
Current output, no-load voltage, max.		20 V
Output ranges, voltage
? 0 to 10 V		Yes
? 1 V to 5 V		Yes
? -10 V to +10 V		Yes
Output ranges, current
? 0 to 20 mA		Yes
? -20 mA to +20 mA		Yes
? 4 mA to 20 mA		Yes
Connection of actuators
? for voltage output two-wire connection		Yes
? for current output two-wire connection		Yes
Load impedance (in rated range of output)
? with voltage outputs, min.		1 k?
? with voltage outputs, capacitive load, max.		1 µF
? with current outputs, max.		600 ?
? with current outputs, inductive load, max.		1 mH
Destruction limits against externally applied voltages and currents
? Voltages at the outputs towards MANA		28.8 V permanent, 35 V for max. 500 ms
Cable length
? shielded, max.		30 m
Analog value generation for the outputs
Analog value display		SIMATIC S7 format
Conversion principle		Resistor network
Integration and conversion time/resolution per channel
? Resolution (incl. overrange)		15 bit + sign
? Conversion time (per channel)		1 ms
Settling time
? for resistive load		2 ms
? for capacitive load		1.8 ms
? for inductive load		2 ms
Errors/accuracies
Output ripple (relative to output range, bandwidth 0 to 50 kHz), (+/-)		U: ±0.6 mVrms; I: ±0.4 nArms
Linearity error (relative to output range), (+/-)		0.02 %
Temperature error (relative to output range), (+/-)		U: 0.001%/°C; I: 0.0025%/°C
Crosstalk between the outputs, min.		70 dB
Repeat accuracy in steady state at 25 °C (relative to output range), (+/-)		0.008 %
Interfaces
Transmission procedure		100BASE-TX
Number of PROFINET interfaces		1
PROFINET IO
? Autocrossing		Yes
? automatic detection of transmission rate		Yes
? Transmission rate, max.		100 Mbit/s
? integrated switch		Yes
PROFINET IO Device
— IRT with the option "high flexibility"		Yes
— Prioritized startup		Yes
Protocols
Supports protocol for PROFINET IO		Yes
PROFINET CBA		No
PROFIsafe		No
Protocols (Ethernet)
? TCP/IP		No
? SNMP		Yes
? DCP		Yes
? LLDP		Yes
? ping		Yes
? ARP		Yes
Interrupts/diagnostics/status information
Status indicator		Yes
Diagnostic functions		Yes
Substitute values connectable		Yes
Alarms
? Diagnostic alarm		Yes
Diagnostic messages
? Diagnostic information readable		Yes
? Monitoring the supply voltage		Yes; Green "ON" LED
? Wire-break		Yes; Channel-by-channel with current output
? Short-circuit		Yes; Channel-by-channel with voltage output
? Group error		Yes; Red/yellow "SF/MT" LED
Potential separation
between the load voltages		Yes
between load voltage and all other switching components		No
between Ethernet and electronics		Yes
Potential separation analog outputs
? between the channels		No
Permissible potential difference
between M internally and the outputs		10 Vpp AC
Isolation
tested with
? 24 V DC circuits		707 V DC (type test)
? Interface		1 500 V; According to IEEE 802.3
Degree and class of protection
IP degree of protection		IP65/67
Connection method
Design of electrical connection		4/5-pin M12 circular connectors
Dimensions
Width		60 mm
Height		175 mm
Depth		49 mm
Weights
Weight (without packaging)		930 g

Article number	6ES7148-6JA00-0AB0	6ES7148-6JD00-0AB0
	ET 200ECO PN: IO-LINK MASTER	ET 200eco PN: IO-Link Master
General information
Vendor identification (VendorID)	002AH	002AH
Device identifier (DeviceID)	0306H	0306H
Supply voltage
Rated value (DC)	24 V	24 V
Reverse polarity protection	Yes	Yes
Load voltage 2L+
? Rated value (DC)	24 V	24 V
? Reverse polarity protection	Yes	Yes; against destruction; load increasing
Input current
Current consumption, typ.	200 mA	100 mA
from supply voltage 1L+, max.	4 A	4 A
from load voltage 2L+, max.	4 A	4 A
Encoder supply
Number of outputs	6	4
Short-circuit protection	Yes	Yes; per channel, electronic
Output current
? Rated value	200 mA; 100 mA per output to X5-X6	500 mA; Per channel
Power loss
Power loss, typ.	8 W	4.8 W
Digital inputs
Number of digital inputs	8
Input characteristic curve in accordance with IEC 61131, type 3	Yes
Number of simultaneously controllable inputs
all mounting positions
— up to 60 °C, max.	8
Input voltage
? Rated value (DC)	24 V
? for signal "0"	-3 to +5V
? for signal "1"	+11 to +30V
Input current
? for signal "0", max. (permissible quiescent current)	1.5 mA
? for signal "1", typ.	7 mA
Input delay (for rated value of input voltage)
for standard inputs
— at "0" to "1", max.	typically 3 ms
— at "1" to "0", max.	typically 3 ms
Cable length
? unshielded, max.	30 m
Digital outputs
Number of digital outputs	4
Short-circuit protection	Yes; Electronic
? Response threshold, typ.	1.8 A
Limitation of inductive shutdown voltage to	Typ. (L1+, L2+) -47 V
Controlling a digital input	Yes
Switching capacity of the outputs
? on lamp load, max.	5 W
Output current
? for signal "1" rated value	1.3 A; Maximum
? for signal "0" residual current, max.	1.5 mA
Parallel switching of two outputs
? for uprating	No
? for redundant control of a load	Yes
Switching frequency
? with resistive load, max.	100 Hz
? with inductive load, max.	0.5 Hz
? on lamp load, max.	1 Hz
Total current of the outputs (per group)
all mounting positions
— up to 60 °C, max.	3.9 A
Cable length
? unshielded, max.	30 m
IO-Link
Number of ports	4	4
? of which simultaneously controllable	4	4
IO-Link protocol 1.0	Yes	Yes
IO-Link protocol 1.1		Yes
Transmission rate	4.8 kBd (COM1); 38.4 kBd (COM2)	4.8 kBaud (COM1); 38.4 kBaud (COM2), 230 kBaud (COM3)
Size of process data, input per port	32 byte	32 byte
Size of process data, input per module	32 byte	128 bytes + 4 bytes PQI
Size of process data, output per port	32 byte	32 byte
Size of process data, output per module	32 byte	128 byte
Memory size for device parameter		2 kbyte; for each port
Master backup		Possible with function block IO_LINK_MASTER
Configuration without S7-PCT		Possible; autostart function
Cable length unshielded, max.	20 m	20 m
Operating modes
? IO-Link	Yes	Yes
? DI	Yes	Yes
? DQ	Yes	Yes; max. 100 mA
Connection of IO-Link devices
? Port type A	Yes	Yes; via 3-core cable
? Port type B		Yes; Additional device supply: max. 2 A per port, max. 4 A per module
? via three-wire connection	Yes
Interfaces
Transmission procedure	100BASE-TX	100BASE-TX
Number of PROFINET interfaces	1	1
PROFINET IO
? Autocrossing	Yes	Yes
? automatic detection of transmission rate	Yes	Yes
? Transmission rate, max.	100 Mbit/s	100 Mbit/s
? integrated switch	Yes	Yes
PROFINET IO Device
— IRT with the option "high flexibility"	Yes	Yes
Protocols
Supports protocol for PROFINET IO	Yes	Yes
PROFINET CBA	No	No
PROFIsafe	No	No
Protocols (Ethernet)
? SNMP	Yes	Yes
? DCP	Yes	Yes
? LLDP	Yes	Yes
? ping	Yes	Yes
? ARP	Yes	Yes
Interrupts/diagnostics/status information
Status indicator	Yes; Green LED	Yes; Green LED
Diagnostic functions	Yes	Yes
Alarms
? Diagnostic alarm	Yes	Yes
Diagnostic messages
? Diagnostic information readable	Yes	Yes
? Monitoring the supply voltage	Yes; Green "ON" LED	Yes; Green "ON" LED
? Wire-break in actuator cable	Yes
? Wire-break in signal transmitter cable	Yes
? Short-circuit	Yes	Yes; Device supply to M
? Short-circuit encoder supply	Yes
? Group error	Yes; Red/yellow "SF/MT" LED	Yes; Red/yellow "SF/MT" LED
Potential separation
between the load voltages	Yes	Yes
between load voltage and all other switching components	No	No
between Ethernet and electronics	Yes	Yes
Potential separation digital inputs
? between the channels	No
Potential separation digital outputs
? between the channels	No
Isolation
tested with
? 24 V DC circuits	707 V DC (type test)	707 V DC (type test)
? Interface	1 500 V; According to IEEE 802.3	1 500 V; According to IEEE 802.3
Degree and class of protection
IP degree of protection	IP65/67	IP65/67
Connection method
Design of electrical connection		3/5-pin M12 round connectors
Dimensions
Width	60 mm	30 mm
Height	175 mm	200 mm
Depth	49 mm	49 mm
Weights
Weight (without packaging)	910 g	550 g

skener.ru

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Бесконтактные выключатели Конечные выключатели Оптические датчики Энкодеры

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FS - Установка умягчения

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FK - Установка обезжелезивания