Product description

The DT Configurator has been developed to assist with selection of drive train products from the product range. It is available as a selection guide offline within the Interactive Catalog CA 01 (DVD?ROM), and online in the Industry Mall. The DT Configurator makes it easier to find the correct drive solution. With the preselection, the product range can be restricted and the right product series determined. Converters can be selected according to the specific application.

As well as the correct article number, the DT Configurator also immediately supplies the associated documentation.

It can display operating instructions, factory test certificates, terminal box documentation, etc. and generates data sheets, dimension drawings and a start-up calculation for the relevant products. It can also be used to identify a suitable converter for the selected motor.

The comprehensive help system not only explains the program functions, but also provides access to detailed technical background knowledge.

DT Configurator – efficient drive configuration:

• Fast and easy configuration of drive components
• Configuration of drive systems for pump, fan and compressor applications ranging from 1 kW to 2.6 MW
• Wide range of products for selection
• Comprehensive documentation
• Support for retrofit applications
• Direct ordering via the Industry Mall

System requirements

• Internet access and standard browser (e.g. Internet Explorer V7.0 and higher, Firefox V5.0 and higher)
• Documentation (data sheets, dimension drawings, etc.) is output in PDF or RTF formats
• Registration is not required to use the DT Configurator

Offline access in the electronic catalog CA 01

The electronic catalog CA 01 on DVD-ROM – the offline version of the Siemens Industry Mall of Siemens Industry and Drive Technologies – contains over 100000 products with approximately 5 million possible drive system product variants.

The Catalog CA 01 can be installed as a light or full version from the DVD-ROM directly onto your hard disk or network. The DT Configurator can then be found in the main menu of the CA 01 under the "Selection guide" tab.

Online access in the Siemens Mall

In addition, the DT Configurator can be used on the Internet without requiring any installation. The DT Configurator can be found in the Siemens Industry Mall under the following address:

http://www.siemens.com/dt-configurator