Faster command processing, depending on the CPU type, language extensions and new data types
Even shorter response times of the CPUs due to considerably faster backplane bus
Powerful network connection: PROFINET IO IRT (2-port switch) as standard interface. Additional PROFINET interface integrated, e.g. for network separation.
Integrated technology
Connection of analog and PROFIdrive-capable drives via standardized blocks (PLCopen)
Support of speed-controlled and positioning axes as well as external encoders
Trace functions for all CPU variables, both for diagnostics in real time as well as for sporadic error detection
Comprehensive control functionalities, e.g. easily configurable blocks for automatic optimization of the control parameters for optimum control quality
Security Integrated
Password-based know-how protection against unauthorized read-out and modification of program blocks
Copy protection for tying individual blocks to the serial number of the SIMATIC Memory Card: The block can only run if the configured memory card is inserted into the CPU.
4-level authorization concept: Communication to the HMI devices can also be restricted.
Manipulation protection: The controller recognizes changed or unauthorized transmissions of the engineering data.
Design and handling
Display for showing overview information: e.g. station name, plant identifier, location designation, etc., diagnostic information, module information, display settings.
Possible operator control options on the display: Set addresses, set date and time, select operating mode of CPU, reset CPU to factory settings, disable/enable display, activate protection levels.
Integrated system diagnostics
System diagnostics information is displayed consistently and in plain text in the display, TIA Portal, HMI devices and Web server, even for messages from the drives, and updated even if the CPU is in STOP mode.
Integrated into the firmware of the CPU, no special configuration is required
SIMATIC Memory Card (required for operation of the CPU)
Used as a plug-in load memory or for updating the firmware.
Also for storing additional documents or csv files (for recipes and archives)
Creation of data blocks for storage/reading of data via SFCs of the user program
Datalog (archives) and recipes
Storage of csv files for recipes and archives on the SIMATIC Memory Card; easy access to plant-relevant operating data using Office tools or via a Web server
Easy access to machine configuration data by means of a Web browser or SD card reader (two-way data exchange from and to the controller)
Programming of the standard program section
Programming with STEP 7 V13
Programming of the fail-safe program section
Programming of the safety-related program section with the "STEP 7 Safety Advanced" option package.
