SITOP UPS1600 web server

The SITOP UPS1600 with Ethernet/PROFINET has an integrated web server that supports remote monitoring and control of the uninterruptible power supply. Using HTTPS ensures encrypted and safe data transmission.

Remote monitoring and control of:

• Hardware configuration data
• Remote monitoring
• Operating data of the UPS1600 basic unit and the connected UPS1100 battery module
• Alarm messages

Remote access via:

• Firefox 34 or higher, or Internet Explorer 10, 11 (IE 8 with charging of SVG player)
• IP address
• Password

The password-protected web server supports viewing of the configuring and operating data.

SITOP UPS1600 software

Software tools support convenient integration of the SITOP UPS1600 in both PC-based and PLC-based systems. They make configuring and visualizing the DC UPS easier and the user benefits from the high performance of the SITOP UPS1600.

Software for open, PC-based automation systems

SITOP UPS Manager

Configuration and monitoring is performed easily using the free PC software SITOP UPS Manager. It enables the reactions of the PC to the operating states of the DC UPS to be freely selected and offers comprehensive diagnostic options:

• Configuration
  • Connection via USB or Ethernet
  • All the relevant parameters can be configured in UPS Manager and transferred to the UPS1600
  • Configuration of "non-coded" rechargeable batteries is possible
  • The reactions of the PC to the operating states of the UPS can be freely selected, e.g. termination of software applications
  • Support for reliable downloading of several PCs according to the master-slave principle
  • The configurations can be saved locally
  • Integrated OPC UA server
  • Updating of the UPS1600 firmware is possible
  • Assignment of IP addresses and device names of the UPS1600
  • Can run under Windows XP, Windows 7 (32-bit and 64-bit) operating systems
• Monitoring
  • Readout and display of alarms, statuses and operating variables of the UPS1600 and the connected energy storage unit
  • Tracing of history in trend diagrams

Monitor window for battery status in SITOP UPS Manager

Trend diagram for load current in SITOP UPS Manager

Software for TIA-based automation systems

For convenient integration of the DC UPS in the TIA environment, different software modules are available.

Engineering is simple via the TIA Portal. The data for UPS1600 is stored in the hardware catalog version V14 and higher. Special function blocks for SIMATIC S7-300, S7-400, S7-1200 and S7-1500 also support integration in the STEP 7 user program.

The comprehensive diagnostics data of the UPS1600 power supply can be visualized using prepared UPS faceplates for WinCC.

TIA Portal

• Convenient and fail-safe integration of SITOP UPS1600 in the PROFINET network by means of drag-and-drop
• Convenient configuration of SITOP UPS1600 basic units with Ethernet/PROFINET and the UPS1100 battery module simply by selecting from the TIA Portal hardware catalog
• Free download of HSP (Hardware Support Package) for TIA Portal version V12 SP1 or higher available at
  http://support.automation.siemens.com/WW/view/en/75854606
• Free GSD file (Generic Station Description) for STEP 7 V 5.5
  http://support.automation.siemens.com/WW/view/en/75854605

Establishing the PROFINET connection between the SITOP UPS1600 and the controller is easy and fail-safe in the TIA Portal

STEP 7 function blocks

Function blocks are available for STEP 7 user programs on SIMATIC S7-300/400/1200/1500. They allow further processing of the DC UPS operating data.

• Function blocks for STEP 7 V5.5
• Function blocks from STEP 7 V12 and higher

Free download:
http://support.automation.siemens.com/WW/view/en/75854608

Faceplates for WinCC

Ready-to-use faceplates save programming time for visualization of the uninterruptible power supply. The faceplates show all relevant statuses and values of the DC UPS. They are available for the following systems:

• Faceplates for WinCC V7.2
• Faceplates for WinCC flexible 2008 SP3
• Faceplates for WinCC Comfort/Advanced/Professional V12

Free download:
http://support.automation.siemens.com/WW/view/en/75854608

The pre-compiled WinCC faceplates show all the relevant UPS data in a clearly comprehensible display. An icon with color coding for the operating state is also available

Software for SIMATIC PCS 7 process control system

The SITOP library is available with blocks and faceplates for direct integration into SIMATIC PCS 7. The SW blocks in the SIMATIC S7 supply the faceplate on the user interface of the process control system with operating and diagnostics data, generate messages and ensure connection to the maintenance system of PCS 7. This means that PCS 7 users automatically receive information about operating state conditions, maintenance requirements (e.g. battery replacement) and disturbances (e.g. power failures). This ensures constant transparency of the 24V supply in the control system. The SITOP library supports the following SIMATIC PCS 7 versions:

• SIMATIC PCS 7 V8.0 with SP2
• SIMATIC PCS 7 V8.1
• SIMATIC PCS7 V8.1 with SP1
• SIMATIC PCS7 V8.2 available soon

Free download at:
https://support.industry.siemens.com/cs/ww/en/view/109476154