Basic design

• All-metal 19" enclosure (2 U) for high mechanical robustness (vibration/shock) and high EMC
• For mounting in a horizontal and prepared for the mounting of telescopic rails
• Lockable front door for authorized access (access protection) to swap media at the front, operating controls (Reset, Power), USB interface, front fan and dust filter
• Card retainer for PC modules for safe operation and transport (vibration, shock)
• Opening of the enclosure cover with only one screw and replacement of PC components (e.g. PC cards or HDD) with a single tool
• Front fan and dust filter can be replaced without tools
• Dust protection thanks to overpressure ventilation using ball bearing mounted front fan via filter; 3 slots for installation of drives
  • Front: 2 x HDD swap frames (low profile); 1 x optical drive (slimline)
  • Internal: 2 x 3.5" (in optional, shock and vibration-damped disk-drive support) as an alternative to swap frames
• Graphics on-board, Intel® HD 4600 integrated in the processor, up to 3840 x 2160 pixels, 60 Hz, 32-bit colors
• Interfaces:
  • 2 x Intel Gbit Ethernet (RJ45, teaming-capable)
  • 4 x USB 3.0: 2 x rear, 1 x front, 1 x internal e.g. for software dongle with optional interlocking
  • 3 x USB 2.0: 2 x rear, 1 x front, can be used with door closed
  • 2 x DisplayPort V1.2, 1 x DVI-I, VGA via adapter cable (optional)
  • 1 x COM1, 2 x PS/2
  • Audio: Line Out, Micro
• Power supply: 100 ... 240 V AC, 50 ... 60 Hz

Design versions

• Processor:
  • Intel® Xeon™ E3-1268L v3
    4C/8T, 2.3 (3.3) GHz, 8 MB cache, turbo-boost 2.0, Extended Memory 64 (EM64) and virtualization technology (VT-x/-d), iAMT 9.0
  • Intel® Core™ i5-4570TE
    2C/4T, 2.7 (3.3) GHz, 4 MB cache, turbo-boost 2.0, Extended Memory 64 (EM64) and virtualization technology (VT-x/-d), iAMT 9.0
  • Intel® Core™ i3-4330TE
    2C/4T, 2.4 GHz, 4 MB cache, Extended Memory 64 (EM64) and virtualization technology (VT-x)
• Main memory configuration as dual channel with 4 GB and higher for best performance
  • 2 GB to 32 GB DDR3-1600 SDRAM
  • 8 GB to 32 GB DDR3-1600 SDRAM, ECC memory

Memory notes:
In order to use a memory with more than 4 GB, a 64-bit operating system is required. In the case of configurations with at least 4 GB, the visible memory can be reduced to about 3.5 GB or less (with 32-bit operating systems).

• Fieldbus onboard:
  • PROFIBUS/MPI, CP 5622-compatible or PROFINET, 3 x RJ45, CP 1616-compatible
• Bus modules with 4 spare slots for expansions (all long):
  • PCI slots (2 PCI, 2 PCI-Express)
    2 x PCI
    2 x PCI-Express x16 (8 lane) Gen 3
  • PCI-Express slots (4 PCI-Express)
    1 x PCI-Express x16 (4 lane) Gen 3
    1 x PCI-Express x16 (4 lane) Gen 2
    1 x PCI-Express x16 (4 lane) Gen 3
    1 x PCI-Express x16 (8 lane) Gen 3
  • PCI-Express slots (2 PCI-Express)
    1 x PCI-Express x16 (4 lane) Gen 3
• Graphics expansion:
  • PCI-Express graphics card x16 (Dual Head: 2 x VGA or 2 x DVI-D); 512 MB; up to 2048 x 1536 pixels, 60 Hz, 32-bit colors
  • Adapter cable (DVI-I to VGA) for the onboard graphics interface (1 x VGA) for connecting an analog monitor
• Hard disks (HDD) SATA / SAS 3.5'' with NCQ technology and solid-state drive (SSD) SATA 2.5'' with MLC technology
  • Mounted internally on the permanent hard disk support:
    1x 240 GB SSD
  • Internal installation in vibration/shock-absorbing hard disk support:
    1 x 500 GB HDD
    1 x 1 TB HDD
    2 x 1 TB HDD
    2 x 1 TB HDD; RAID1, 1 TB (2 x 1 TB HDD, mirror disks), RAID controller onboard
  • Installed on the front in the low-profile swap frame (hot swapping in RAID configurations):
    1 x 500 GB HDD
    1 x 1 TB HDD
    2 x 1 TB HDD
    1 x 240 GB SSD
    RAID1, 1 TB (2 x 1 TB HDD, mirror disks), RAID controller onboard
    RAID1, 1 TB (2x 1 TB HDD SAS, mirror disks), PCIe x8 RAID controller incl. ZMCP module; (2 slots occupied)
    RAID1, 240 GB (2 x 240 GB SSD, mirror disks), RAID controller onboard
• Optical drive:
  • DVD±R/RW (slimline)
• Interfaces:
  • 1 x COM2 and 1 x LPT (in slot cover, occupies one slot) at rear
• Power supply:
  • 100...240 V AC, 50...60 Hz, redundant
  • Country-specific power cable
• Operating systems (preinstalled and activated):
  • Windows 7 Ultimate SP1, 32-bit, multi-language
  • Windows 7 Ultimate SP1, 64-bit, multi-language
  • Windows 10 IoT Enterprise LTSB 2015, 64-bit, Multi-Language
  • Windows Server 2008 R2 Standard Edition SP1 incl. 5 clients, 64-bit, multi-language
  • Windows Server 2012 R2 Standard Edition incl. 5 clients, 64-bit, multi-language
• Software expansions:
  • SIMATIC IPC DiagMonitor ¹⁾
  • SIMATIC IPC Image & Partition Creator ¹⁾
  • TPM module - onboard security hardware (Trusted Platform Module)

¹⁾ Further information can be found under "Expansion components".

Rack PC IPC647D, open

IPC647D, rear view, redundant power supply