Intelligent Operator Panel IOP Handheld

IOP Handheld for mobile use

The IOP Handheld is a very user-friendly and powerful operator panel for commissioning and diagnostics as well as local operator control and monitoring of SINAMICS G110D, SINAMICS G120D and SINAMICS G110M distributed inverters as well as SIMATIC ET 200pro FC?2 distributed converters.

The IOP Handheld supports both entry-level personnel and drive experts. Thanks to the large plain text display, the menu-based operation and the application wizards, it is easy to commission standard drives. A drive can be essentially commissioned without having to use a printed parameter list – as the parameters are displayed in plain text, and explanatory help texts and the parameter filtering function are provided.

Application wizards interactively guide you when commissioning important applications such as conveyor technology, pumps, fans and compressors.

There is a basic commissioning wizard for general commissioning.

The drives are easily controlled manually using directly assigned buttons and the navigation wheel. The IOP Handheld has a dedicated switchover key to switch over from the automatic to the manual mode.

The converter can be diagnosed in a user-friendly fashion using the plain text display of faults and alarms. Help texts can be obtained by pressing the INFO button.

Up to two process values can be graphically visualized and up to four process values can be numerically visualized on the status screen/display.

Process values can also be displayed in technological units.

The IOP Handheld supports standard commissioning of identical drives. For this purpose, a parameter list can be copied from a converter into the IOP Handheld and when required, downloaded into other drive units of the same type.

The IOP supports the following languages ¹⁾: German, English, French, Italian, Spanish, Portuguese, Dutch, Swedish, Russian, Czech, Polish, Turkish, Finnish.

In addition to the IOP, the IOP Handheld includes a housing with the rechargeable batteries, charging unit and RS232 connecting cable. The charging unit is supplied with connector adapters for Europe, the US and UK. When the batteries are fully charged, the operating time is up to 8 hours.

To connect the IOP Handheld to SINAMICS G110D, SINAMICS G120D, SINAMICS G110M or SIMATIC ET 200pro FC?2, the RS232 connecting cable with optical interface is required in addition.

Updating the IOP Handheld

The IOP Handheld can be updated and expanded using the integrated USB interface.

Data to support future drive systems can be transferred from the PC to the IOP Handheld via drag & drop. Further, the USB interface allows user languages and wizards that will become available in the future to be subsequently downloaded and the firmware to be updated for the IOP Handheld ¹⁾.

The IOP is supplied with power via the USB interface during an update.

¹⁾ Further information is available at
https://support.industry.siemens.com/cs/document/67273266

Memory card

SINAMICS memory card (SD card)

The parameter settings for a converter can be stored on the SINAMICS SD card. When service is required, e. g. after the converter has been replaced and the data have been downloaded from the memory card, the drive system is immediately ready for use again.

STARTER commissioning tool

The STARTER commissioning tool (V4.4 and higher) plus SSP supports the commissioning and maintenance of SIMATIC ET 200pro FC?2 frequency converters. The operator guidance combined with comprehensive, user-friendly functions for the relevant drive solution allow you to commission the device quickly and easily.

You can find further information about the STARTER commissioning tool in the section Engineering Tools.

¹⁾ The STARTER commissioning tool is also available on the Internet at http://www.siemens.com/starter

PC inverter connection kit 2

The mini USB interface cable is used to control and commission an converter directly from a PC via a point-to-point connection if the appropriate software (STARTER commissioning tool version 4.4 and higher, plus SSP) has been installed.

Connecting cables pre-assembled at one end and connector sets to connect to the line supply

Motor cables pre-assembled at one end and connector sets to connect the converter to the motor

Power jumper connector

The power jumper connector is used for 400 V power transmission to following 400 V modules.