SIPLUS S7-300 Ex analog input modules . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на SIPLUS S7-300 Ex analog input modules

| | | | | | |

SIPLUS S7-300 Ex analog input modules

Article number	6AG1331-7RD00-2AB0	6AG1331-7SF00-4AB0
	SIPLUS S7-300 SM331 4AE	SIPLUS S7-300 SM331 20pol
Supply voltage
Load voltage L+
? Rated value (DC)	24 V	24 V
Input current
from load voltage L+ (without load), max.	250 mA
from backplane bus 5 V DC, max.	60 mA	120 mA
Output voltage
Power supply to the transmitters
? Rated value (DC)	13 V; at 22 mA
? No-load voltage (DC)	25.2 V
Power loss
Power loss, typ.	3 W	0.6 W
Analog inputs
Number of analog inputs	4	8; 8x thermocouples; 4x RTD thermoresistors
permissible input current for current input (destruction limit), max.	40 mA
Input ranges (rated values), currents
? 0 to 20 mA	Yes
? 4 mA to 20 mA	Yes
Input ranges (rated values), thermocouples
? Type B		Yes
? Type E		Yes
? Type J		Yes
? Type K		Yes
? Type L		Yes
? Type N		Yes
? Type R		Yes
? Type S		Yes
? Type T		Yes
? Type U		Yes
Input ranges (rated values), resistance thermometer
? Ni 100		Yes
? Pt 100		Yes
? Pt 200		Yes
Cable length
? shielded, max.	200 m	200 m; TC: 50 m
Analog value generation for the inputs
Measurement principle	Sigma Delta	Sigma Delta
Integration and conversion time/resolution per channel
? Resolution with overrange (bit including sign), max.	16 bit; 10 bit to 15 bit + sign	16 bit; 10 bit to 15 bit + sign
? Integration time, parameterizable	Yes; 2.5 to 100 ms	Yes; 2.5 to 100 ms
? Interference voltage suppression for interference frequency f1 in Hz	10 to 400 Hz	10 to 400 Hz
Encoder
Connection of signal encoders
? for current measurement as 2-wire transducer	Yes	Yes
? for current measurement as 4-wire transducer	Yes	Yes
Errors/accuracies
Temperature error (relative to input range), (+/-)		Temperature error: 0.001 to 0.002 %/K
Operational error limit in overall temperature range
? Current, relative to input range, (+/-)	0.45 %
? Resistance thermometer, relative to input range, (+/-)		0.09 to 0.04%
Basic error limit (operational limit at 25 °C)
? Current, relative to input range, (+/-)	0.1 %
? Resistance thermometer, relative to input range, (+/-)		0.1 %
Interference voltage suppression for f = n x (f1 +/- 1 %), f1 = interference frequency
? Series mode interference (peak value of interference < rated value of input range), min.	60 dB	60 dB
? Common mode interference, min.	130 dB	130 dB
Interrupts/diagnostics/status information
Diagnostic messages
? Diagnostic information readable	Yes	Yes
? Overrange	Yes	Yes
? Wire-break in signal transmitter cable	Yes	Yes
? Short-circuit of the signal encoder cable	Yes	Yes
Ex(i) characteristics
Maximum values of input circuits (per channel)
? Co (permissible external capacity), max.	90 nF	43 µF
? Io (short-circuit current), max.	68.5 mA	28.8 mA
? Lo (permissible external inductivity), max.	7.5 mH	40 mH
? Po (power of load), max.	431 mW	41.4 mW
? Ri, max.	50 ?
? Uo (output no-load voltage), max.	25.2 V	5.9 V
Potential separation
Potential separation analog inputs
? Potential separation analog inputs	Yes	Yes
Permissible potential difference
between the inputs (UCM)	60 V DC/30 V AC when used in the hazardous area; 400 V DC/250 V AC when used in NON-hazardous area	60 V DC/30 V AC when used in the hazardous area; 400 V DC/250 V AC when used in NON-hazardous area
Between the inputs and MANA (UCM)	60 V DC/30 V AC when used in the hazardous area; 400 V DC/250 V AC when used in NON-hazardous area	60 V DC/30 V AC when used in the hazardous area; 400 V DC/250 V AC when used in NON-hazardous area
Standards, approvals, certificates
CE mark	Yes	Yes
UL approval	Yes; File E239877	Yes; File E239877
FM approval	Yes; CofC 3028431	Yes; CofC 3028431
RCM (formerly C-TICK)	Yes	Yes
KC approval	Yes	Yes
EAC (formerly Gost-R)	Yes	Yes
Railway application
? EN 50121-4	No
? EN 50155	No	No
Use in hazardous areas
? Type of protection acc. to EN 50020 (CENELEC)	[EEx ib] IIC
? Type of protection acc. to FM	Class I, Division 2, Group A, B, C, D T4
? Test number KEMA		KEMA 09 ATEX 0077X
? Test number PTB	Ex-96.D.2092X
Ambient conditions
Ambient temperature during operation
? min.	-25 °C; = Tmin	0 °C; = Tmin
? max.	60 °C; = Tmax; 60 °C @ UL/cUL, ATEX and FM use, 70 °C only 4 wire	60 °C; = Tmax
Ambient temperature during storage/transportation
? min.	-40 °C	-40 °C
? max.	70 °C	70 °C
Extended ambient conditions
? relative to ambient temperature-atmospheric pressure-installation altitude		Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)
Relative humidity
— With condensation, tested in accordance with IEC 60068-2-38, max.	100 %; RH incl. condensation/frost (no commissioning under condensation conditions)	100 %; RH incl. condensation/frost (no commissioning under condensation conditions)
Resistance
— against biologically active substances / conformity with EN 60721-3-3	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!
— against chemically active substances / conformity with EN 60721-3-3	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!
— against mechanically active substances / conformity with EN 60721-3-3	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!
Connection method
required front connector	20-pin	20-pin
Weights
Weight, approx.	290 g	210 g

skener.ru

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Бесконтактные выключатели Конечные выключатели Оптические датчики Энкодеры

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FS - Установка умягчения

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FK - Установка обезжелезивания