Controller

SIDOOR ATD420W machine tool door drive

6FB1141?2AT10?-3WE2

The following individual components must be ordered separately:

Power supplies

"Power supplies"

• Mains transformer

6FB1112?0AT20?2TR0

• Switch mode power supply NT40

6FB1112?0AT20?3PS0

Additional units
that enable universal implementation and maintenance of the door drive system

"Additional units"

• Software Kit

6FB1105?0AT01?6SW0

• Service Tool

6FB1105?0AT01?6ST0

• Emergency power module

6FB1115?0AT10?4CP0

DC geared motors

"Geared motors"

• SIDOOR MDG180 geared motors (max. door weight 180 kg, degree of protection IP56)

• SIDOOR MDG180 L (pinion left)

6FB1103?0AT14?4MB0

• SIDOOR MDG180 R (pinion right)

6FB1103?0AT13?4MB0

• SIDOOR MDG400 geared motors (max. door weight 400 kg, degree of protection IP56)

• SIDOOR MDG400 L (pinion left)

6FB1103?0AT14?4MC0

• SIDOOR MDG400 R (pinion right)

6FB1103?0AT13?4MC0

• SIDOOR M3 geared motors (max. door weight 180 kg, degree of protection IP40)

• SIDOOR M3 L (pinion left)

6FB1103?0AT10?4MB0

• SIDOOR M3 R (pinion right)

6FB1103?0AT11?4MB0

• SIDOOR M4 geared motor (max. door weight 400 kg, degree of protection IP40)

• SIDOOR M4 L (pinion left)

6FB1103?0AT10?3MC0

• SIDOOR M4 R (pinion right)

6FB1103?0AT11?3MC0

• SIDOOR M5 geared motors (max. door weight 600 kg, degree of protection IP40)

• SIDOOR M5 L (pinion left)

6FB1103?0AT10?3MD0

• SIDOOR M5 R (pinion right)

6FB1103?0AT11?3MD0

Accessories for the overall system
See also overview diagram > "For elevators"

"Accessories"

Accessories for all controllers for industrial applications

• Rubber-metal anti-vibration mounts
  for low-noise operation of the door drive system

• for the SIDOOR MDG180 and SIDOOR M3 geared motors

6FB1104?0AT02?0AD0

• for SIDOOR MDG400, SIDOOR M4 and SIDOOR M5 geared motors

6FB1104?0AT01?0AD0

• Mounting bracket

• for SIDOOR geared motors
  for flexible accommodation of the rubber-bonded metal

6FB1104?0AT01?0AS0

• for the deflector unit
  for setting the toothed belt to the required tension

6FB1104?0AT02?0AS0

• DIN rail holder for mounting controllers on the DIN rail TH 35 according to IEC 60715

6FB1144?0AT00?3AS0

• Door clutch holder
  for connecting a door leaf to the toothed belt

• for toothed belt width of 12 mm

6FB1104?0AT01?0CP0

• for toothed belt width of 14 mm

6FB1104?0AT02?0CP0

• Deflector unit
  for the toothed belt STS, for attaching to the door system

6FB1104?0AT03?0AS0

• Toothed belt STS
  as a connection between the door system and the end positions of the door

• Toothed belt width 12 mm
  Length 4 m
  Length 45 m

6FB1104?0AT01?0AB0
6FB1104?0AT02?0AB0

• Toothed belt width 14 mm
  Length 4 m
  Length 55 m

6FB1104?0AT03?0AB0
6FB1104?0AT04?0AB0

Accessories for the SIDOOR ATD420W machine tool door drive

• Hybrid connecting cables CABLE-MDG
  for connecting the SIDOOR MDG geared motor to the machine tool door drive

• CABLE-MDG-0.5m (length 0.5 m)

6FB1104?0AT00?0CB5

• CABLE-MDG-1.5m (length 1.5 m)

6FB1104?0AT01?0CB5

• CABLE-MDG-5m (length 5 m)

6FB1104?0AT05?0CB0

• CABLE-MDG-7m (length 7 m)

6FB1104?0AT07?0CB0

• CABLE-MDG-10m (length 10 m)

6FB1104?0AT10?0CB0

• CABLE-MDG-15m (length 15 m)

6FB1104?0AT15?0CB0

• CABLE-MDG-20m (length 20 m)

• PROFIBUS FastConnect bus connector and PROFIBUS FC Standard Cable GP

• PB FC RS 485 PLUG 180
  bus connector for connecting the SIDOOR ATD420W machine tool door drive to the SIMATIC controller

6GK1500?0FC10

• PB FC Standard Cable GP
  bus cable with a special design for quick mounting

6XV1830?0EH10

• Electronic module for ET 200S
  for serial data exchange via point-to-point connection

6ES7138?4DF11?0AB0

• Communication module CM PtP RS 422/485 BA

6ES7540?1AB00?0AA0

• Communication module CM 1241
  Communication module for point-to-point connection

6ES7241?1CH32?0XB0