Delivery stages

SINUMERIK Integrate for production Access MyMachine /Ethernet is delivered in 3 different stages:

Stage 1: SINUMERIK Integrate for production Access MyMachine /Ethernet – Single Access

The following services are provided within SINUMERIK Integrate for production Access MyMachine /Ethernet – Single Access:

Remote desktop

This function allows remote operation and monitoring of the user interface of the control system. The user interface is not only accessible to the operator at the machine, but also to service personnel in cases where they are providing support from a remote location, for example.

File transfer

The file transfer function allows files to be copied into the file system of the CNC. In addition, files can be transferred from the CNC's file system to the remote desktop.

Session recording

Session recording is used to record a remote maintenance operation for subsequent reproduction.

Stage 2: SINUMERIK Integrate for production Access MyMachine /Ethernet – Conferencing

The Conferencing function supplied with stage 2 allows further participants to be included in a remote maintenance session. In addition to a valid Conferencing license on the machine, the only other prerequisite is that the third participant has access to the Internet.

Stage 2 includes Stage 1.

Stage 3: SINUMERIK Integrate for production Access MyMachine /Ethernet – Remote STEP 7

The Remote STEP 7 function supplied with stage 3 provides support for the diagnosis and solution of PLC-related problems. The service technician requires a STEP 7 installation, and by means of SINUMERIK Integrate for production Access MyMachine /Ethernet – Remote STEP 7, he can access the machine's PLC directly. A local installation of STEP 7 on the machine is not necessary.

Stage 3 includes Stages 1 and 2.