Flow sensor SITRANS FCS400 . Технические данные. Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на Flow sensor SITRANS FCS400

| | | | | | |

Flow sensor SITRANS FCS400

Flow sensor FCS400
Parameter	Unit	Value
Process pressure range	[barg (psi)]	316L: 0 … 100 (0 … 1450)
Process pressure range	[barg (psi)]	Hastelloy C22: 0 … 160 (0 … 2321)
Process temperature range	[°C (°F)]	-50 … +200 (-58 … +392)
Ambient temperature range	[°C (°F)]	-40 … +60 (-40 … +140)
Transport temperature range	[°C (°F)]	-40 … +70 (-40 … +158)
Density range	[kg/m³ (lb/ft³)]	1 … 5000 (0.062 … 312.2)
Process media	Fluid group	1 (suitable for dangerous fluids)
Process media	Form	Light slurry, liquid and non-condensing gas
No. of process values
Primary process values		Mass flow
		Density
		Process medium temperature
Derieved process values		Volume flow
		Corrected volume flow (with reference density)
		Fraction A:B
		Fraction % A:B
Performance specifications		Sensor
Parameter	Unit	DN 15	DN 25	DN 50	DN 80
Max. zero point error	[kg/h (lb/min)]	0.2 (0.007)	2.0 (0.072)	7.5 (0.276)	18 (0.66)
Q_min	[kg/h (lb/min)]	20 (0.735)	200 (7.35)	750 (27.6)	900 (33.1)
Q_nom	[kg/h (lb/min)]	3 700 (136.0)	11 500 (422.6)	52 000 (1 911)	136 000 (4 997)
Q_max	[kg/h (lb/min)]	6 400 (235.2)	17 700 (650.4)	70 700 (2 598)	181 000 (6 651)
Linearity error mass flow	[%]	± 0.1	± 0.1	± 0.1	± 0.1
Repeatability mass flow	[%]	± 0.05	± 0.05	± 0.05	± 0.05
Density accuracy standard calibration	[kg/m³ (lb/ft³)]	± 5 (± 0.31)	± 5 (± 0.31)	± 5 (± 0.31)	± 5 (± 0.31)
Density accuracy extended calibration	[kg/m³ (lb/ft³)]	± 0.5 (± 0.031)	± 0.5 (± 0.031)	± 0.5 (± 0.031)	± 0.5 (± 0.031)
Temperature error	[°C (°F)]	± 0.5 (± 0.9)	± 0.5 (± 0.9)	± 0.5 (± 0.9)	± 0.5 (± 0.9)

Pressure/temperature curves

With two major exceptions, the pressure rating of the flow sensors is independent of the process medium temperature. Design rules for flange connections in both the EN 1092-1 and ASME B16.5 standards dictate pressure derating with increasing temperature. The charts below show the effect of process medium temperature on the pressure ratings for the flanges within the FCS400 product program.

EN 1092-1 flanged sensors

ASME B16.5 flanged sensors

Sensor variants

SITRANS FCS400 sensors are available in three main variants: Standard, hygienic and NAMUR. A wide range of process connections is available for the FCS400 sensors. The available combinations of type, sensor size and connection size are shown in the tables below.

Standard sensors

Sensor	Connection	EN 1092-1 B1, PN 16	EN 1092-1 B1, PN 40	EN 1092-1 B1, PN 63	EN 1092-1 B1, PN 100	EN 1092-1 D Nut, PN 40	EN 1092-1 D Nut, PN 63	EN 1092-1 D Nut, PN 100	ANSI B16.5-2009, class 150
Standard: 7ME461.-...
DN 15 (?")	DN 6 (?")
	DN 10 (3/8")
	DN 15 (?")	X	X	O	X	O	O	O	X
	DN 20 (?")		X						X
	DN 25 (1")	X	X		X
DN 25 (1")	DN 15 (?")
	DN 25 (1")	X	X	O	X	O	O	O	X
	DN 32 (1?")		X
	DN 40 (1?")	O	X		O				O
DN 50 (2")	DN 25 (1")
	DN 40 (1?")	O	X	O	X	O	O	O
	DN 50 (2")	X	X	O	X	O	O	O	X
	DN 65 (2?")
DN 80 (3")	DN 50 (2")
	DN 65 (2?")	O	X	O	O				X
	DN 80 (3")	X	X	O	X	O	O	O	X
	DN 100 (4")	X	O	O	O

Sensor	Connection	ANSI B16.5-2009, class 300	ANSI B16.5-2009, class 600	ISO 228-1 G pipe thread	ASME B1.20.1 NPT pipe thread	DIN 11851 Hygienic screwed	DIN 32676 Hygienic Tri-clamp	DIN 11864-1A Aseptic screwed	DIN 11864-2A Aseptic flanged
Standard: 7ME461.-...
DN 15 (?")	DN 6 (?")			O	O
	DN 10 (3/8")					O
	DN 15 (?")	X	X	X	X	X	X	X	X
	DN 20 (?")	O	X				X
	DN 25 (1")					O
DN 25 (1")	DN 15 (?")
	DN 25 (1")	O	X	X	X	X	X	X	X
	DN 32 (1?")					O
	DN 40 (1?")	O	O				X
DN 50 (2")	DN 25 (1")
	DN 40 (1?")					O	X	O	X
	DN 50 (2")	X	X	X	X	x	X	X	X
	DN 65 (2?")
DN 80 (3")	DN 50 (2")
	DN 65 (2?")	O	X			X
	DN 80 (3")	X	X			X	X	X	X
	DN 100 (4")

Sensor	Connection	ISO 2852 Hygienic clamped	ISO 2853 Hygienic screwed	SMS 1145 Hygineic screwed	12-VCO-4 Quick connect	JIS B2200:2004/10K	JIS B2200:2004/20K	JIS B2200:2004/40K
Standard: 7ME461.-...
DN 15 (?")	DN 6 (?")
	DN 10 (3/8")
	DN 15 (?")				O	O	O	O
	DN 20 (?")
	DN 25 (1")	X	X	O
DN 25 (1")	DN 15 (?")
	DN 25 (1")	X	X	O		O	O	O
	DN 32 (1?")
	DN 40 (1?")	O	O
DN 50 (2")	DN 25 (1")
	DN 40 (1?")	O	O	O
	DN 50 (2")	X	X	O		O	O	O
	DN 65 (2?")
DN 80 (3")	DN 50 (2")
	DN 65 (2?")
	DN 80 (3")	X	X	O		O	O	O
	DN 100 (4")

Combinations shown X are Mainstream products with delivery time of up to 15 days depending on the combination and production stock levels.
Combinations shown O are Sidestream products with delivery from 45 to 90 days. Not all components are held in production stock for Sidestream products.

Hygienic sensor variants

The hygienic sensors all have maximum internal surface roughness electropolished Ra < 0.8 ?m and are EHEDG and 3A approved. Hygienic sensors are offered with process connection conforming to various international quick-connect clamps or threaded connectors. Pressure ratings are according to the relevant standard and the sensor size. Maximum pressure in the hygienic program is PN 40.

Sensor	Connection	DIN 11851 0.8 ?m screwed	DIN 32676 0.8 ?m Tri-clamp	DIN 11864-1 0.8 ?m screwed	DIN 11864-2 0.8 ?m flanged	ISO 2852 0.8 ?m clamped	ISO 2853 0.8 ?m screwed
Hygienic: 7ME462.-...
DN 15 (?")	DN 6 (?")
	DN 10 (3/8")	O
	DN 15 (?")	X	X	X	X
	DN 20 (?")		X
	DN 25 (1")	O				X	X
DN 25 (1")	DN 15 (?")
	DN 25 (1")	X	X	X	X	X	X
	DN 32 (1?")	O
	DN 40 (1?")		X			O	O
DN 50 (2")	DN 25 (1")
	DN 40 (1?")	O		O	X	O	O
	DN 50 (2")	X	X	X	X	X	X
	DN 65 (2?")
DN 80 (3")	DN 50 (2")
	DN 65 (2?")	X
	DN 80 (3")	X	X	X	X	X	X
	DN 100 (4")

Combinations shown X are Mainstream products with delivery time of up to 15 days depending on the combination and production stock levels.
Combinations shown O are Sidestream products with delivery from 45 to 90 days. Not all components are held in production stock for Sidestream products.

Aseptic flanged process connections

The aseptic flanges offered for FCS400 conform with the standard DIN 11864-2A BF-A. The flange fitted to the sensor is therefore the back flange and the seal is an O-ring.

The flange dimensions in the FCS400 program are as follows:

Size DN	Pipe	Bore d₁	Ring OD d₁₁	Bolt Circle d₅	Bolt holes	Flange diameter d₁₀
10	13 x 1.5	10	22.4	37	4 x O9	54
15	19 x 1.5	16	28.4	42	4 x O9	59
20	23 x 1.5	20	32.4	47	4 x O9	64
25	29 x 1.5	26	38.4	53	4 x O9	70
32	35 x 1.5	32	47.7	59	4 x O9	76
40	41 x 1.5	38	53.7	65	4 x O9	82
50	53 x 1.5	50	65.7	77	4 x O9	94
65	70 x 2.0	66	81.7	95	8 x O9	107
80	85 x 2.0	81	97.7	112	8 x O11	113

DIN 11864-2A BF-A flange dimensions

NAMUR sensor variants

The NAMUR variants have built-in lengths according to NAMUR recommendation NE 132. The recommendations of NE 132 are stated for sensors with flanges the same size as the sensor nominal size, and for flanges to EN 1092-1 PN 40 with B1 flange facing. For couplings of other standards such as ASME B16.5 Class 150, the overall length incorporates the difference in length between standard EN and ASME flanges. NAMUR variants are offered with flange and pipe thread connections according to EN, ISO oand ASME standards, as shown in the table below.

Sensor	Connection	EN 1092-1 B1, PN 16	EN 1092-1 B1, PN 40	EN 1092-1 B1, PN 63	EN 1092-1 B1, PN 100	EN 1092-1 D Nut, PN 40	EN 1092-1 D Nut, PN 63	EN 1092-1 D Nut, PN 100	ANSI B16.5-2009, class 150
NAMUR: 7ME471.-...
DN 15 (?")	DN 6 (?")
	DN 10 (3/8")
	DN 15 (?")	O	X	O	X	O	O	O	X
	DN 20 (?")								X
	DN 25 (1")	O	X		X
DN 25 (1")	DN 15 (?")
	DN 25 (1")	O	X	O	X	O	O	O	X
	DN 32 (1?")
	DN 40 (1?")	O	X		O				O
DN 50 (2")	DN 25 (1")
	DN 40 (1?")	O	X	O	X	O	O	O
	DN 50 (2")	O	X	O	X	O	O	O	X
	DN 65 (2?")
DN 80 (3")	DN 50 (2")
	DN 65 (2?")	O	X	O	O				X
	DN 80 (3")	O	X	O	X	O	O	O	X
	DN 100 (4")	O	O	O	O

Sensor	Connection	ANSI B16.5-2009, class 300	ANSI B16.5-2009, class 600	ISO 228-1 G pipe thread	ASME B1.20.1 NPT pipe thread	DIN 11851 Hygienic screwed	DIN 32676 Hygienic Tri-clamp	DIN 11864-1A Aseptic screwed	DIN 11864-2A Aseptic flanged
NAMUR: 7ME471.-...
DN 15 (?")	DN 6 (?")			O	O
	DN 10 (3/8")					O
	DN 15 (?")	O	X	X	X	X	X	X	X
	DN 20 (?")	O	X				X
	DN 25 (1")					O
DN 25 (1")	DN 15 (?")
	DN 25 (1")	O	X	X	X	X	X	X	X
	DN 32 (1?")					O
	DN 40 (1?")	O	O				X
DN 50 (2")	DN 25 (1")
	DN 40 (1?")					O		O	X
	DN 50 (2")	O	X	X	X	X	X	X	X
	DN 65 (2?")
DN 80 (3")	DN 50 (2")
	DN 65 (2?")	O	X			X
	DN 80 (3")	O	X			X	X	X	X
	DN 100 (4")

Sensor	Connection	ISO 2852 Hygienic clamped	ISO 2853 Hygienic screwed
NAMUR: 7ME471.-...
DN 15 (?")	DN 6 (?")
	DN 10 (3/8")
	DN 15 (?")
	DN 20 (?")
	DN 25 (1")	X	X
DN 25 (1")	DN 15 (?")
	DN 25 (1")	X	X
	DN 32 (1?")
	DN 40 (1?")	O	O
DN 50 (2")	DN 25 (1")
	DN 40 (1?")	O	O
	DN 50 (2")	X	X
	DN 65 (2?")
DN 80 (3")	DN 50 (2")
	DN 65 (2?")
	DN 80 (3")	X	X
	DN 100 (4")

Combinations shown X are Mainstream products with delivery time of up to 15 days depending on the combination and production stock levels.
Combinations shown O are Sidestream products with delivery from 45 to 90 days. Not all components are held in production stock for Sidestream products.

skener.ru

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Бесконтактные выключатели Конечные выключатели Оптические датчики Энкодеры

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FS - Установка умягчения

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FK - Установка обезжелезивания