The local CMS station is directly located on the crane. Depending on the size of the crane, it comprises a single operator station (CMS Lean or CMS Basic) or a Webserver for additional operator panels (CMS with WebClients – WebNavigator). The CMS station is directly connected to the crane controller and acquires all the relevant operational data.

Examples:

• Ladle crane
• Goliath crane
• Slewing luffing crane

Requirements:

• Acquisition of productivity data and archiving
• Alarm/event reporting system with archiving
• Error logs and productivity data logs
• Replay function for playback
• Visualization of the crane and individual components
• CMS display should be installed in the crane driver cabin

Example of solution:

CMS Lean
Article No. 6GA7214-0AA00-0AA0

Panel PC 477 as the HMI device and CMS PC for example (this article number can vary,
depending of the Panel PC configuration: processor, RAM memory, hard drive as SSD, etc.):
Article No. 6AV7240-3CC07-0HA0

Further information: See "Technical specifications", "Selection and ordering data" and the SIMATIC HMI Catalog ST 80.