Siemens
СРЕДСТВА ПРОМЫШЛЕННОЙ АВТОМАТИЗАЦИИ
официальный партнер Сименс
Каталог СА01 2017
архивный
(4872) 700-366
skenergo@mail.ru

SCALANCE XR-500 managed
  • Integrated redundancy manager for constructing ring topologies with up to 10 Gbps and high-speed media redundancy. Reliable communication can be achieved by interconnecting the ends of an optical or electrical line to form a ring. The redundancy manager (RM) integrated in the SCALANCE XR-500 switch monitors the function of the network. It recognizes the failure of a transmission link or of a SCALANCE X switch in the ring and activates a substitute path within a maximum of 200 milliseconds.
  • Redundant Layer 2 interfacing to corporate networks;
    SCALANCE XR-500 switches support the standardized redundancy procedures Multiple Spanning Tree Protocol (MSTP), Rapid Spanning Tree Protocol (RSTP), and Spanning Tree Protocol (STP). This enables a subnet to be connected redundantly to a higher-level corporate network with reduced requirements for the reconfiguration time (in the order of seconds).
  • Layer 3 switching functions (optional) enable simple subdivision of large networks into smaller subnets with their own address space. Reasons for subdivision into subnets can include separation of the Ethernet network to reduce the broadcast load, separation of sensitive areas from the main network, and subdivision of the network into logical working groups.
  • Redundant Layer 3 connection to corporate networks;
    SCALANCE XR-500 switches support the standardized routing protocols Open Shortest Path First (OSPF) and Routing Information Protocol (RIP), and the standardized routing procedure Virtual Router Redundancy Protocol (VRRP). This means industrial, routed subnets can also be connected redundantly to a higher-level corporate network.
  • Support of virtual networks (VLAN);
    for structuring Industrial Ethernet networks with a fast-growing number of users, a physically existing network can be divided into several virtual subnets. Port-based, protocol-based and IP-based VLANs are available for selection.
  • Load limiting when multicast protocols (e.g. video transmission) are used;
    by learning the multicast receivers (IGMP Snooping, IGMP Querier), SCALANCE XR-500 switches can also filter multicast data traffic and therefore limit the load in the network. Multicast and broadcast traffic can be limited.
  • Time synchronization;
    diagnostic messages (log table entries, e-mails) are time-stamped. Local time is standardized throughout the network by means of synchronization with a SICLOCK time transmitter or SNTP/NTP server, thereby simplifying the assignment of diagnostic messages from multiple devices.
  • Link Aggregation (IEEE 802.3ad) for bundling data streams
  • Quality of Service (IEEE 802.1Q) for prioritization of network traffic

Increasing the transmission bandwidth by means of link aggregation

Network topology and network configuration

The network topology can easily be adapted to the structure of the plant using SCALANCE XR-500 Industrial Ethernet switches.

The following network structures and combinations thereof can be implemented:

  • Ethernet with fast media redundancy;
    to increase network availability, as many as 50 X-200, X-300, X-400 or X-500 switches cascaded in line can be connected into a ring.
  • Multiple rings can be redundantly linked using the standby function
  • Star topology with SCALANCE XR-500 switches:
    Each SCALANCE XR-500 switch represents a neutral star point that can connect up to 52 nodes or subnets with each other electrically.

Use of SCALANCE XR-500 in redundant network topologies, e.g. with Rapid Spanning Tree Protocol (RSTP) and ring redundancy

When configuring the network, it is necessary to observe the following constraints:

  • Maximum line length between two modules for multi-mode fiber-optic conductors:
    • 5 km at 100 Mbps
    • 750 m at 1 000 Mbps
    • 300 m at 10 Gbps
  • Maximum line length between two modules for single-mode fiber-optic conductors:
    • 26 to 200 km at 100 Mbps
    • 10 to 120 km at 1 000 Mbps
    • 10 to 40 km at 10 Gbps
  • Maximum cable length of the TP cable between two SCALANCE X switches:
    • Max. 100 m with IE FC Cable 2 x 2 and IE FC RJ45 Plug 180
    • Max. 100 m at 1 Gbps with IE FC Standard Cable 4 x 2 (90 m), IE FC RJ45 Modular Outlet and patch cable (10 m)
    • Max. 10 m using patches with TP cord

Commissioning and diagnostics

Setting options on the device itself:

  • Redundancy manager RM;
    to establish a ring, a SCALANCE XR-500 is switched to RM mode. The non-ring ports of the RM can be used freely for the connection of data terminals and networks. If the MRP redundancy procedure standardized by PROFINET is used, the RM is adjusted automatically.
  • Signal mask;
    The signal mask is set to the current status of the SCALANCE XR-500 (setpoint state) by pushbutton operation. The signal mask defines which ports and which power supplies are to be monitored. The signaling contact only reports an error when a monitored port or a monitored feeder fails (deviation of setpoint/actual status).
  • IP address;
    the IP address is assigned by means of dynamic host configuration protocol (DHCP). If there is no corresponding server in the network, the IP address can be assigned using an enclosed software tool.

Diagnostic options on site:

  • The following status information is displayed by LEDs on site:
    • Port status
    • Port mode (Mbps, full/half-duplex)
    • Status of the two power supplies
    • Signaling contact status
    • Signal mask (setpoint status)
    • RM mode
    • Standby mode
  • Via the browser of a mobile device (smartphone, tablet)
  • The status of the signaling contact is routed externally by means of floating relay contacts. This enables, for example, the module to be monitored via an input module from a controller.
  • Monitoring via the Industrial Ethernet network;
    The following options are available:
    • Via standard browser (Web-based management):
      Selection of SCALANCE XR-500 switches via the network from a PC with browser
    • Via SNMP V1, V2c, V3:
      Secure integration of SCALANCE XR-500 switches via the network into a network management system, e.g. SINEMA Server
    • Via PROFINET IO diagnostics:
      PROFINET diagnostic alarms from SCALANCE XR-500 switches can be displayed using the relevant SIMATIC engineering tools and they can also be processed in the controller. The engineering outlay for the PLC and HMI have been drastically reduced due to the complete integration in the SIMATIC concept for system error messages.
    • Via the browser of a mobile device (smartphone, tablet)

Network management

Network management provides the following functions:

  • Password-protected dial-up for "Administrator" (read and write authorization) and "User" (read only)
  • Read-out of version and status information
  • Setting the signal and standby mask and address information
  • Fixed parameterization of the ports (data rates, half/full duplex) and filter tables
  • Setting of Spanning/Rapid/Multiple Spanning Tree parameters
  • Parameterization of Web management services
  • Security
    • Ports can be connected or disconnected
    • Port-based network access control according to IEEE 802.1x
    • Authentication in accordance with IEEE 802.1x
    • Support of Access Control List (ACL)
  • Output of statistics information
  • Diagnosis of data traffic by means of a parameterizable mirror port with a standard commercial network analyzer
  • Loading of new firmware versions or configuration data via the network by a TFTP server or directly via HTTP/HTTPS using a Web browser
  • Saving the configuration data or log table via the network on a TFTP server

If faults occur in the network, the SCALANCE XR-500 switch can independently send error messages (traps) to a network management system, such as SINEMA Server, or also e-mails to a predefined network administrator.

Remote monitoring (RMON) provides the following functions:
The SCALANCE XR-500 switch can collect statistics information according to the RMON groups 1 through 4. These include, for example, fault statistics that are kept for each port. This information can be read out through web-based management in the statistics sub-area.

















skener.ru

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Арматура DENDOR

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Датчики и измерители

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Регуляторы и регистраторы

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Пневматическое оборудование

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Краны и Клапаны

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Измерительные приборы

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Системы беспроводного управления «умный дом»

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Бесконтактные выключатели Конечные выключатели Оптические датчики Энкодеры

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FS - Установка умягчения

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FK - Установка обезжелезивания
Каталог оборудования 2017
Siemens Industry Catalog Drive Technology Automation Technology Automation Systems Operator control and monitoring systems SIMATIC HMI Identification systems Industrial Communication Introduction Industrial Ethernet PROFINET Introduction Drive Systems Controller SIMATIC PCS 7 process control systems Distributed I/O Motion Control Systems CNC Controls Operator panels Industrial PC Switching and Protection Devices for Power Distribution Power Monitoring SENTRON Measuring Devices Configuring, Visualizing and Controlling with SIMATIC Configuring, Visualizing and Controlling with SENTRON Industrial Identification Systems Network Components Cabling Technology Layer 2 Switches Compact Switch Modules SCALANCE X-000 unmanaged SCALANCE X-100 unmanaged SCALANCE X-200 managed SCALANCE X-200IRT managed SCALANCE X-300 managed SCALANCE X-500 managed SCALANCE XR-500 managed Media modules for modular SCALANCE X-500 managed Power supplies for SCALANCE X-500 Industrial Ethernet Security Industrial Wireless LAN Network transitions Industrial Controls SITOP power supplies Software and Tools Network management and diagnostics Technology Components PROFIBUS AS-Interface IO-Link Industrial Wireless Communication Industrial Remote Communication Industrial Security Industrial Controls Manufacturing Execution Systems (MES) SIMATIC IT PC-based Automation Process control systems Process instrumentation Process analytics SITOP power supplies Products for specific requirements Energy Building Technologies Low-Voltage Controls and Distribution Safety Systems - Safety Integrated Market-specific solutions Industry Services ... and everything else you need




  © ООО "СК ЭНЕРГО" 2007-2022
  (4872) 700-366  skenergo@mail.ru
Яндекс.Метрика