Analog electronics modules . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на Analog electronics modules

| | | | |

Analog Electronics Modules

Article number	6ES7134-7SD00-0AB0	6ES7134-7SD51-0AB0	6ES7134-7TD00-0AB0	6ES7134-7TD50-0AB0
	ET200ISP, EL-MOD., 4 AI TC	ET200ISP, EL-MOD., 4 AI RTD, PT100/NI100	ET200ISP, EL-MOD., 4 AI, HART, 2-WIRE	ET200ISP, EL-MOD., 4 AI, HART, 4-WIRE
Input current
from supply voltage L+, max.	30 mA	22 mA	320 mA	30 mA
Output voltage
Power supply to the transmitters
? short-circuit proof			Yes
? Supply current, max.			23 mA; per channel
Power loss
Power loss, typ.	0.4 W	0.4 W	2.7 W	0.4 W
Analog inputs
Number of analog inputs	4	4	4	4
permissible input current for current input (destruction limit), max.			90 mA	50 mA
Cycle time (all channels) max.	320 ms; 66 ms basic conversion time x 4 channels with interference frequency suppression 60 Hz, 80 ms basic conversion time x 4 channels with interference frequency suppression 50 Hz	320 ms; 66 ms basic conversion time x 4 channels with interference frequency suppression 60 Hz, 80 ms basic conversion time x 4 channels with interference frequency suppression 50 Hz	120 ms; 30 ms basic conversion time x 4 channels with 60 Hz, 50 Hz interference frequency suppression	120 ms; 30 ms basic conversion time x 4 channels with 60 Hz, 50 Hz interference frequency suppression
Technical unit for temperature measurement adjustable	Yes	Yes	Yes	Yes
Input ranges
? Voltage	Yes	No	No	No
? Current	No	No	Yes	Yes
? Thermocouple	Yes	No	No	No
? Resistance thermometer	No	Yes	No	No
? Resistance	No	Yes	No	No
Input ranges (rated values), voltages
? -80 mV to +80 mV	Yes
? Input resistance (-80 mV to +80 mV)	1 000 k?
Input ranges (rated values), currents
? 4 mA to 20 mA			Yes	Yes
? Input resistance (4 mA to 20 mA)				295 ?
Input ranges (rated values), thermocouples
? Type B	Yes
? Input resistance (Type B)	1 000 k?
? Type C	Yes
? Input resistance (Type C)	1 000 k?
? Type E	Yes
? Input resistance (Type E)	1 000 k?
? Type J	Yes
? Input resistance (type J)	1 000 k?
? Type K	Yes
? Input resistance (Type K)	1 000 k?
? Type L	Yes
? Input resistance (Type L)	1 000 k?
? Type N	Yes
? Input resistance (Type N)	1 000 k?
? Type R	Yes
? Input resistance (Type R)	1 000 k?
? Type S	Yes
? Input resistance (Type S)	1 000 k?
? Type T	Yes
? Input resistance (Type T)	1 000 k?
? Type U	Yes
? Input resistance (Type U)	1 000 k?
Input ranges (rated values), resistance thermometer
? Ni 100		Yes
? Input resistance (Ni 100)		2 000 k?
? Pt 100		Yes
? Input resistance (Pt 100)		2 000 k?
Input ranges (rated values), resistors
? 0 to 600 ohms		Yes; Also 1000 ohms
? Input resistance (0 to 600 ohms)		1 000 k?
Thermocouple (TC)
Temperature compensation
— internal temperature compensation	Yes; via supplied TC sensor module
— external temperature compensation with compensations socket	Yes; via temperature value, acquired by an analog module of the same ET 200iSP station
Characteristic linearization
? parameterizable	Yes	Yes
— for thermocouples	Yes
— for resistance thermometer		Yes
Cable length
? shielded, max.	50 m	500 m	500 m	500 m
Analog value generation for the inputs
Measurement principle	integrating (Sigma-Delta)	integrating (Sigma-Delta)	integrating (Sigma-Delta)	integrating (Sigma-Delta)
Integration and conversion time/resolution per channel
? Resolution with overrange (bit including sign), max.	16 bit	16 bit	13 bit	12 bit; + sign
? Integration time, parameterizable	Yes	Yes	No	Yes
? Basic conversion time, including integration time (ms)	80 ms at 50 Hz; 66 ms at 60 Hz	80 ms at 50 Hz; 66 ms at 60 Hz		30 ms
— additional conversion time for wire-break monitoring	5 ms	5 ms
? Interference voltage suppression for interference frequency f1 in Hz	50 / 60 Hz	50 / 60 Hz	50 / 60 Hz	50 / 60 Hz
Smoothing of measured values
? parameterizable	Yes; in 4 stages	Yes; in 4 stages	Yes; in 4 stages	Yes; in 4 stages
? Step: None	Yes; 1 x cycle time	Yes; 1 x cycle time	Yes; 1 x cycle time	Yes; 1 x cycle time
? Step: low	Yes; 4 x cycle time	Yes; 4 x cycle time	Yes; 4 x cycle time	Yes; 4 x cycle time
? Step: Medium	Yes; 32 x cycle time	Yes; 32 x cycle time	Yes; 32 x cycle time	Yes; 32 x cycle time
? Step: High	Yes; 64 x cycle time	Yes; 64 x cycle time	Yes; 64 x cycle time	Yes; 64 x cycle time
Encoder
Connection of signal encoders
? for current measurement as 2-wire transducer			Yes
— Burden of 2-wire transmitter, max.			750 ?
? for current measurement as 4-wire transducer				Yes
? for resistance measurement with two-wire connection		Yes
? for resistance measurement with three-wire connection		Yes
? for resistance measurement with four-wire connection		Yes
Errors/accuracies
Linearity error (relative to input range), (+/-)	0.015 %	0.015 %	0.015 %	0.015 %
Temperature error (relative to input range), (+/-)	0.02 %/K	0.02 %/K	0.005 %/K	0.005 %/K
Crosstalk between the inputs, min.	-50 dB	-50 dB	-50 dB	-50 dB
Repeat accuracy in steady state at 25 °C (relative to input range), (+/-)	0.01 %	0.01 %	0.01 %	0.01 %
Operational error limit in overall temperature range
? Voltage, relative to input range, (+/-)	0.15 %
? Current, relative to input range, (+/-)			0.15 %	0.15 %
? Resistance thermometer, relative to input range, (+/-)		0.15 %; Applies to resistances standard ±0.8 K, climatic ±0.3 K
Basic error limit (operational limit at 25 °C)
? Voltage, relative to input range, (+/-)	0.1 %
? Current, relative to input range, (+/-)			0.1 %	0.1 %
? Resistance thermometer, relative to input range, (+/-)		0.1 %; Applies to resistances standard ±0.5 K, climatic ±0.2 K
Interference voltage suppression for f = n x (f1 +/- 1 %), f1 = interference frequency
? Series mode interference (peak value of interference < rated value of input range), min.	70 dB	70 dB	70 dB	70 dB
? Common mode interference, min.	90 dB	90 dB
Interrupts/diagnostics/status information
Alarms
? Diagnostic alarm	Yes; Parameterizable	Yes	Yes; Parameterizable	Yes; Parameterizable
? Limit value alarm	Yes; Parameterizable	Yes	Yes; Parameterizable	Yes; Parameterizable
Diagnostic messages
? Diagnostic information readable	Yes	Yes	Yes	Yes
? Wire-break		Yes	Yes	Yes
? Short-circuit		Yes	Yes
? Group error		Yes
Diagnostics indication LED
? Group error SF (red)	Yes	Yes	Yes	Yes
Potential separation
Potential separation analog inputs
? between the channels	Yes	No	No	No
? between the channels and backplane bus	Yes	Yes	Yes	Yes
? Between the channels and load voltage L+		Yes; Channels and power bus
Standards, approvals, certificates
CE mark	Yes	Yes	Yes	Yes
Highest safety class achievable in safety mode
? Performance level according to ISO 13849-1	none	none	none	none
? SIL acc. to IEC 61508	No	No	No	No
Use in hazardous areas
? Type of protection acc. to EN 50020 (CENELEC)	II2 G (1) GD Ex ib[ia] IIC T4 and I M2 Ex ib[ia] I	II2 G (1) GD Ex ib[ia] IIC T4 and I M2 Ex ib[ia] I	II2 G (1) GD Ex ib[ia] IIC T4 and I M2 Ex ib[ia] I	II2 G (1) GD Ex ib[ia] IIC T4 and I M2 Ex ib[ia] I
? Type of protection acc. to KEMA	04 ATEX 1246	04 ATEX 1247	04 ATEX 1244	04 ATEX 1245
Dimensions
Width	30 mm	30 mm	30 mm	30 mm
Height	129 mm	129 mm	129 mm	129 mm
Depth	136.5 mm	136.5 mm	136.5 mm	136.5 mm
Weights
Weight, approx.	230 g	230 g	230 g	230 g

Article number		6ES7135-7TD00-0AB0
		ET200ISP, EL-MOD., 4 AO, 4-20MA, HART
Input current
from load voltage L+ (without load), max.		330 mA
Power loss
Power loss, typ.		2.7 W
Analog outputs
Number of analog outputs		4
Cycle time (all channels) max.		3.6 ms
Output ranges, current
? 0 to 20 mA		Yes
? 4 mA to 20 mA		Yes
Connection of actuators
? for current output two-wire connection		Yes
Load impedance (in rated range of output)
? with current outputs, max.		750 ?
Cable length
? shielded, max.		500 m
Analog value generation for the outputs
Integration and conversion time/resolution per channel
? Resolution with overrange (bit including sign), max.		14 bit
Settling time
? for resistive load		4 ms
? for capacitive load		40 ms
? for inductive load		40 ms
Errors/accuracies
Linearity error (relative to output range), (+/-)		0.015 %
Temperature error (relative to output range), (+/-)		0.005 %/K
Crosstalk between the outputs, min.		-50 dB
Repeat accuracy in steady state at 25 °C (relative to output range), (+/-)		0.01 %
Operational error limit in overall temperature range
? Current, relative to output range, (+/-)		0.15 %
Basic error limit (operational limit at 25 °C)
? Current, relative to output range, (+/-)		0.1 %
Interrupts/diagnostics/status information
Substitute values connectable		Yes
Alarms
? Diagnostic alarm		Yes
Diagnostic messages
? Diagnostic information readable		Yes
? Wire-break		Yes
? Short-circuit		Yes
Diagnostics indication LED
? Group error SF (red)		Yes
Potential separation
Potential separation analog outputs
? between the channels		No
? between the channels and backplane bus		Yes
Standards, approvals, certificates
CE mark		Yes
Use in hazardous areas
? Type of protection acc. to EN 50020 (CENELEC)		II2 G (1) GD Ex ib[ia] IIC T4 and I M2 Ex ib[ia] I
? Type of protection acc. to KEMA		04 ATEX 1250
Dimensions
Width		30 mm
Height		129 mm
Depth		136.5 mm
Weights
Weight, approx.		265 g

Article number	6ES7193-7CA00-0AA0	6ES7193-7CA10-0AA0	6ES7193-7CA20-0AA0	6ES7193-7CB00-0AA0
	ET200ISP, TERM.-MOD. TM-EM/EM60S F. EM	ET200ISP, TERM.-MOD. TM-EM/EM60C F. EM	ET200ISP, TERM.-MOD. TM-EM/EM60S F. EM	ET200ISP, TERM.-MOD. TM-RM/RM
Standards, approvals, certificates
CE mark	Yes	Yes	Yes	Yes
Use in hazardous areas
? Type of protection acc. to EN 50020 (CENELEC)	see ET200iSP system	see ET200iSP system	No	see ET200iSP system
? Test number KEMA	04 ATEX 2242	04 ATEX 2242		07 ATEX 0205
Dimensions
Width	60 mm	60 mm	60 mm	60 mm
Height	190 mm	190 mm	190 mm	190 mm
Depth	52 mm	52 mm	52 mm	52 mm
Weights
Weight, approx.	275 g	275 g	235 g	340 g

Article number		6ES7138-7AA00-0AA0
		ET200ISP, RESERVE MODULE
Digital inputs
Number of digital inputs		0
Standards, approvals, certificates
CE mark		Yes
Use in hazardous areas
? Type of protection acc. to EN 50020 (CENELEC)		II2 G EEx ib IIC T4
? Test number KEMA		04 ATEX 1251
Dimensions
Width		30 mm
Height		129 mm
Depth		136.5 mm
Weights
Weight, approx.		180 g

skener.ru

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Бесконтактные выключатели Конечные выключатели Оптические датчики Энкодеры

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FS - Установка умягчения

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FK - Установка обезжелезивания