The WirelessHART adapter can be used in a number of different applications:

• Access to installed basis
  Diagnostic information is obtained from existing wired HART devices thanks to the permanent electrical connection of a WirelessHART adapter, and is sent to system-based asset management software such as SITRANS MDS.
• Status monitoring of system
  Wireless devices are mounted at critical points in the system, which are not usually connected to the control room due to difficult accessibility or extensive costs for wiring. Better data flow and diagnostics increase plant reliability, transparency and safety.
• Process optimization
  Temporary installation of a 4 ... 20mA or standard HART device together with a SITRANS AW200 WirelessHART adapter allows easier, flexible monitoring and plant optimization at lower costs.
• Process monitoring
  Measured values, for example from tanks or silos, are transmitted to a higher-level system at regular intervals, together with the device and battery status.