Shaft heights:

Frame sizes 071 - 315 mm (area of standard motors)

Power range: 
(50 Hz types)

Up to 460 kW (thermally utilized according to temperature class B at T_U = 40 °C)

Up to 500 kW (thermally utilized according to temperature class B at TU = 40 °C)

Up to 30 kW for braking torques from 10 to 270 Nm

Number of poles:

2 - 8 pole; also higher pole numbers for special versions

Pole changing:
2 speeds, e.g. 4/2, 6/2, 8/4, 8/63 speeds, e.g. 8/6/4

Voltage range:

Low voltage up to 1000 V

Rated voltages:

380 - 400 - 420 V / D +- 5 %
655 - 690 - 725 V / S +- 5 %
500 V +- 5 %

2 - 8 pole

possible on request

4 - 8 pole

possible on request

Operating mode:

S1 and various

Degree of protection:

IP55, IP56, to IP66

IP55, IP56, IP66 (higher degrees of protection on request)

up to IP66

Cooling type:

IC 411, IC 416, however, also special cooling types such as e.g. non-ventilated IC

IC 71 W

IC 411, IC 416

Type of construction:

IM B3, IM B6, IM B7, IM V6
IM B5, IM V3, IM V1, IM V5, IM B35, IM V15, IM B14, IM B34, IM V18, IM V19

IM B3, IM V5, IM V6, IM B5, IM V1, IM V3Special types of construction possible on request

IM B3, IM V5, IM V6, IM B5, IM V1, IM V3, IM B35, IM V15, IM V36Special types of construction possible on request

Enclosure:

Gray cast iron

Bearings:

Ball bearings (standard) and special bearings for high axial (thrust) and radial forces

Regulations:

IEC, EN, DIN, VDE

Types of protection:

"d" as well as dust explosion protection according to EN 50281-1-1 / EN 50281-1-2

"d"

"d" as well as dust explosion protection according to EN 50281-1-1 / EN 50281-1-2

Noise level:

All motors are noise-optimized (noise limit values according to EN 60034-9), low-noise version possible for 2-pole motors (GG3)

All motors are noise-optimized (noise limit values according to EN 60034-9