Overview

Assets

ET 200pro motor starters in I/O system ET 200pro

SIMATIC ET 200pro is the modular I/O system with high IP65/66/67 degree of protection for local, cabinet-free use. The ET 200pro motor starters with the high degree of protection IP65 are an integral part of ET 200pro.

ET 200pro motor starter: Isolator module, Standard starter and High Feature starter mounted on a wide module rack

ET 200pro motor starters

• Only two variants up to 5.5 kW
• All settings can be parameterized by bus
• Comprehensive diagnostics signals
• Support for PROFIenergy
• Overload can be acknowledged by remote reset
• Current unbalance monitoring
• Stall protection
• EMERGENCY START function in case of overload
• Current value transmission by bus
• Current limit monitoring
• Full support of acyclic services
• Direct-on-line or reversing starters
• Power bus connection can be plugged in using the new HAN Q4/2 plug-in connectors
• Motor feeder with Han Q8/0 connector
• Conductor cross-section up to 6 x 4 mm?
• 25 A per segment (power looped through using jumper plug)
• In the Standard and High Feature versions (with 4 DI onBoard)
• Electromechanical switching and electronic switching
• Electronic starter for direct activation or with integrated smooth starter function
• Supplied with 400 V AC brake contact as an option
• Provision of the motor current in PROFIenergy format to higher-level systems, motor current shutdown in dead times using PROFIenergy

ET 200pro isolator modules

The isolator module with switch disconnector function is used for safe disconnection of the 400 V operational voltage during repair work in the plant and provides an integrated group fusing function (i. e. additional group short-circuit protection for all subsequently supplied motor starters).

Depending on the power distribution concept, all stations can be equipped with an isolator module as an option.

Safety applications

Safety Solution local

With the Safety local modules

• Safety local isolator module and
• 400 V disconnecting module

With an appropriate connection, safety levels SIL 3 (according to IEC 62061) and PL e (according to ISO 13849-1) can be reached.

Safety Solution PROFIsafe

With the Safety PROFIsafe modules

• F-Switch and
• 400 V disconnecting module

With an appropriate connection, safety levels SIL 3 (according to IEC 62061) and PL e (according to ISO 13849-1) can also be reached.

Functionality

With the ET 200pro motor starters, any three-phase loads can be protected and switched.

The ET 200pro motor starters are available with mechanical and also electronic contacts.

The ET 200pro electromechanical starters are offered as direct-on-line starters (DSe) and reversing starters (RSe) as Standard and High Feature versions. There are device versions with or without control for externally fed brakes with 400 V AC.

Compared with the Standard motor starters, the High Feature, mechanical motor starter also has:

• 4 digital inputs
• Advanced parameterization options

The ET 200pro electronic starters are offered as direct-on-line starters (sDSSte/sDSte) and reversing starters (sRSSte/sRSte) in the High Feature version:

Compared with the High Feature mechanical motor starters, the High Feature electronic motor starter also has:

• Soft starting and soft run-down function
• Deactivated soft start function as an electronic starter for applications with a high switching frequency
• Advanced parameterization options

As a result of the protection concept with solid-state overload evaluation and the use of SIRIUS switching devices, size S00, additional advantages are realized on the Standard and High Feature motor starters - advantages that soon make themselves positively felt particularly in manufacturing processes with high plant stoppage costs:

• Plant configuration is simplified and flexibility increased thanks to the bit-modular design with ET200pro. When using ET 200pro motor starters, the parts list per load feeder is reduced to two main items: the bus module and the motor starter. This makes the ET 200pro ideal for modular machine concepts or solutions for conveying systems and in machine-tool building.
• Expansions are easily possible through the subsequent adding of modules. The innovative plug-in technology also does away with the wiring needed up to now. Through the hot swapping function (disconnection and connection during operation) a motor starter can be replaced within seconds if necessary, without having to shut down the ET 200pro station and with it the process in the plant. The motor starters are therefore recommendable above all for applications with special demands on availability. Storage costs are optimized in addition by the low level of variance (2 units up to 5.5 kW).

The ordering option for motor starters with a 400 V AC brake output provides the possibility of controlling motors with 400 V AC brakes. With four locally acting inputs available on the High Feature motor starter it is possible to realize autonomous special functions that work independently of the bus and the higher level control system, e.g. as a quick stop on gate valve controls or limit position disconnectors. In parallel with this, the states of these inputs are signaled to the control system.