SIPLUS SM 1234 analog input/output modules . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на SIPLUS SM 1234 analog input/output modules

| | | | | | |

SIPLUS SM 1234 analog input/output modules

Article number	6AG1234-4HE32-2XB0	6AG1234-4HE32-4XB0
	SIPLUS S7-1200 SM 1234 4AI/2AQ 13Bit	SIPLUS S7-1200 SM 1234 4AI/2AQ 13Bit
General information
Product type designation	SM 1234 A I4x13 bit AQ 2x14 bit	SM 1234 A I4x13 bit AQ 2x14 bit
Supply voltage
Rated value (DC)
? 24 V DC	Yes	Yes
Input current
Current consumption, typ.	60 mA	60 mA
from backplane bus 5 V DC, typ.	80 mA	80 mA
Power loss
Power loss, typ.	2 W	2 W
Analog inputs
Number of analog inputs	4; Current or voltage differential inputs	4; Current or voltage differential inputs
permissible input voltage for current input (destruction limit), max.	± 35 V	± 35 V
permissible input voltage for voltage input (destruction limit), max.	35 V	35 V
permissible input current for voltage input (destruction limit), max.	40 mA	40 mA
permissible input current for current input (destruction limit), max.	40 mA	40 mA
Cycle time (all channels) max.	625 µs	625 µs
Input ranges
? Voltage	Yes; ±10V, ±5V, ±2.5V	Yes; ±10V, ±5V, ±2.5V
? Current	Yes; 4 to 20 mA, 0 to 20 mA	Yes; 4 to 20 mA, 0 to 20 mA
Input ranges (rated values), voltages
? -10 V to +10 V	Yes	Yes
? -2.5 V to +2.5 V	Yes	Yes
? -5 V to +5 V	Yes	Yes
Input ranges (rated values), currents
? 0 to 20 mA	Yes	Yes
? 4 mA to 20 mA	Yes	Yes
Analog outputs
Number of analog outputs	2; Current or voltage	2; Current or voltage
Output ranges, voltage
? -10 V to +10 V	Yes	Yes
Output ranges, current
? 0 to 20 mA	Yes	Yes
? 4 mA to 20 mA	Yes	Yes
Load impedance (in rated range of output)
? with voltage outputs, min.	1 000 ?	1 000 ?
? with current outputs, max.	600 ?	600 ?
Analog value generation for the inputs
Measurement principle	Differential	Differential
Integration and conversion time/resolution per channel
? Resolution with overrange (bit including sign), max.	12 bit; + sign	12 bit; + sign
? Integration time, parameterizable	Yes	Yes
? Interference voltage suppression for interference frequency f1 in Hz	40 dB, DC to 60 V for interference frequency 50 / 60 Hz	40 dB, DC to 60 V for interference frequency 50 / 60 Hz
Smoothing of measured values
? parameterizable	Yes	Yes
? Step: None	Yes	Yes
? Step: low	Yes	Yes
? Step: Medium	Yes	Yes
? Step: High	Yes	Yes
Analog value generation for the outputs
Integration and conversion time/resolution per channel
? Resolution (incl. overrange)	Voltage: 14 bits; Current : 13 bits	Voltage: 14 bits; Current : 13 bits
Errors/accuracies
Temperature error (relative to input range), (+/-)	25 °C ±0.1 % / -40 °C to 70 °C ±0.28 % of the full-scale deflection	25 °C ±0.1%, to 55 °C ±0.2% total measurement range
Temperature error (relative to output range), (+/-)	25 °C ±0.3 % / -40 °C to 70 °C ±0.85 % of the full-scale deflection	25 °C ±0.3%, to 55 °C ±0.6% total measurement range
Basic error limit (operational limit at 25 °C)
? Voltage, relative to input range, (+/-)	0.1 %	0.1 %
? Current, relative to input range, (+/-)	0.1 %	0.1 %
? Voltage, relative to output range, (+/-)	0.3 %	0.3 %
? Current, relative to output range, (+/-)	0.3 %	0.3 %
Interference voltage suppression for f = n x (f1 +/- 1 %), f1 = interference frequency
? Common mode voltage, max.	12 V	12 V
Interrupts/diagnostics/status information
Alarms	Yes	Yes
Diagnostic functions	Yes	Yes
Alarms
? Diagnostic alarm	Yes	Yes
Diagnostic messages
? Monitoring the supply voltage	Yes	Yes
? Wire-break	Yes	Yes
? Short-circuit	Yes	Yes
Diagnostics indication LED
? for status of the inputs	Yes	Yes
? for status of the outputs	Yes	Yes
? for maintenance	Yes	Yes
Potential separation analog outputs
? between the channels and the power supply of the electronics	No	No
Degree and class of protection
Degree of protection acc. to EN 60529
? IP20	Yes	Yes
Standards, approvals, certificates
CE mark	Yes	Yes
Ambient conditions
Free fall
? Fall height, max.	0.3 m; five times, in product package	0.3 m; five times, in product package
Ambient temperature during operation
? min.	-40 °C; = Tmin; Startup @ -25 °C	-20 °C; = Tmin; Startup @ 0 °C
? max.	70 °C; = Tmax; Tmax > +60 °C number of simultaneously used outputs 1, inputs 2 (no adjacent points) for horizontal mounting position	60 °C; = Tmax
Extended ambient conditions
? relative to ambient temperature-atmospheric pressure-installation altitude	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)
Relative humidity
— With condensation, tested in accordance with IEC 60068-2-38, max.	100 %; RH incl. condensation/frost (no commissioning under condensation conditions)	100 %; RH incl. condensation/frost (no commissioning under condensation conditions)
Resistance
— against biologically active substances / conformity with EN 60721-3-3	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!
— against chemically active substances / conformity with EN 60721-3-3	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!
— against mechanically active substances / conformity with EN 60721-3-3	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!
Connection method
required front connector	Yes	Yes
Mechanics/material
Enclosure material (front)
? Plastic	Yes	Yes
Dimensions
Width	45 mm	45 mm
Height	100 mm	100 mm
Depth	75 mm	75 mm
Weights
Weight, approx.	220 g	220 g

skener.ru

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Бесконтактные выключатели Конечные выключатели Оптические датчики Энкодеры

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FS - Установка умягчения

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FK - Установка обезжелезивания