SIPLUS SB 1223 digital input/output modules . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на SIPLUS SB 1223 digital input/output modules

| | | | | | |

SIPLUS SB 1223 digital input/output modules

Article number	6AG1223-0BD30-4XB0	6AG1223-0BD30-5XB0	6AG1223-3AD30-5XB0	6AG1223-3BD30-5XB0
	SIPLUS S7-1200 SB 1223 2DI/2DQ 24VDC	SIPLUS S7-1200 SB 1223 2DI/2DQ 24VDC	SIPLUS S7-1200 SB 1223 2DI/2DQ 5VDC	SIPLUS S7-1200 SB 1223 2DI/2DQ, 24VDC
General information
Product type designation	SB 1223 DI2x24 VDC, DQ 2x24 VDC		SB 1223 2xDI / 2xDQ 5VDC 200kHz	SB 1223 2xDI / 2xDQ 24VDC 200kHz
Input current
from backplane bus 5 V DC, typ.	50 mA		50 mA	50 mA
Output voltage
Power supply to the transmitters
? Supply current, max.	4 mA; per channel		4 mA; per channel	4 mA; per channel
Power loss
Power loss, typ.	1 W		1 W	1 W
Digital inputs
Number of digital inputs	2; Current-sinking		2	2
? in groups of	1		1	1
Input characteristic curve in accordance with IEC 61131, type 1	Yes		Yes	Yes
Number of simultaneously controllable inputs
all mounting positions
— up to 40 °C, max.	2		2	2
Input voltage
? Type of input voltage	DC
? Rated value (DC)	24 V		5 V	24 V
? for signal "0"	0 to 5 V		0 to 1 V	0 to 5 V
? for signal "1"	+15 to +30V		2 to 6 V	+15 to +30V
Input current
? for signal "0", max. (permissible quiescent current)	1 mA		3 mA	2 mA
? for signal "1", min.			6 mA	5.8 mA
? for signal "1", typ.	0.5 A			14 mA
Input delay (for rated value of input voltage)
for standard inputs
— parameterizable	Yes; 0.2 ms, 0.4 ms, 0.8 ms, 1.6 ms, 3.2 ms, 6.4 ms and 12.8 ms, selectable in groups of four		Yes; 0.2 ms, 0.4 ms, 0.8 ms, 1.6 ms, 3.2 ms, 6.4 ms and 12.8 ms, selectable in groups of four	Yes; 0.2 ms, 0.4 ms, 0.8 ms, 1.6 ms, 3.2 ms, 6.4 ms and 12.8 ms, selectable in groups of four
— at "0" to "1", max.	2 µs		2 µs	2.5 µs
— at "1" to "0", max.	10 µs
for interrupt inputs
— parameterizable	Yes		Yes	Yes
for counter/technological functions
— parameterizable	Yes		Yes	Yes
Cable length
? shielded, max.	500 m		50 m	50 m; Standard input: 500 m, high-speed counters: 50 m
? unshielded, max.	300 m
Digital outputs
Number of digital outputs	2; MOSFET, solid-state (current-sinking/current-sourcing)		2	2
? in groups of	1		1	1
Short-circuit protection	No
Switching capacity of the outputs
? with resistive load, max.	0.5 A		0.1 A	0.1 A
? on lamp load, max.	5 W
Load resistance range
? upper limit	0.6 ?		5 ?	10 ?
Output voltage
? Rated value (DC)	24 V		5 V	24 V
? for signal "0", max.	0.1 V; with 10 kOhm load		0.4 V	0.1 V; with 10 kOhm load
? for signal "1", min.	20 V		L+ (-0.5 V)	20 V
? for signal "1", max.			6 V
Output current
? for signal "1" rated value	0.5 A		0.1 A	0.1 A
? for signal "1" permissible range, max.			0.11 A
? for signal "0" residual current, max.	10 µA			10 µA
Cable length
? shielded, max.	500 m		50 m	500 m
? unshielded, max.	150 m			150 m
Interrupts/diagnostics/status information
Alarms	Yes		Yes	Yes
Diagnostic functions	Yes		Yes	Yes
Diagnostics indication LED
? for status of the inputs			Yes	Yes
? for status of the outputs	Yes		Yes	Yes
Degree and class of protection
Degree of protection acc. to EN 60529
? IP20	Yes		Yes	Yes
Standards, approvals, certificates
CE mark	Yes		Yes	Yes
Ambient conditions
Free fall
? Fall height, max.	0.3 m; five times, in product package
Ambient temperature during operation
? min.	0 °C; = Tmin	-40 °C; = Tmin; Startup @ -25 °C	-40 °C; = Tmin; Startup @ -25 °C	-40 °C; = Tmin; Startup @ -25 °C
? max.	55 °C; = Tmax	60 °C; = Tmax	60 °C; = Tmax	60 °C; = Tmax
Extended ambient conditions
? relative to ambient temperature-atmospheric pressure-installation altitude	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)
Relative humidity
— With condensation, tested in accordance with IEC 60068-2-38, max.	100 %; Relative humidity, incl. condensation / frost permitted (no commissioning under condensation conditions)	100 %; RH incl. condensation / frost (no commissioning in bedewed state), horizontal installation	100 %; RH incl. condensation / frost (no commissioning in bedewed state), horizontal installation	100 %; RH incl. condensation / frost (no commissioning in bedewed state), horizontal installation
Resistance
— against biologically active substances / conformity with EN 60721-3-3	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!
— against chemically active substances / conformity with EN 60721-3-3	Yes; Class 3C4 incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!
— against mechanically active substances / conformity with EN 60721-3-3	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!
Mechanics/material
Enclosure material (front)
? Plastic	Yes		Yes	Yes
Dimensions
Width	38 mm		38 mm	38 mm
Height	62 mm		62 mm	62 mm
Depth	21 mm		21 mm	21 mm
Weights
Weight, approx.	40 g		40 g	40 g

skener.ru

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Бесконтактные выключатели Конечные выключатели Оптические датчики Энкодеры

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FS - Установка умягчения

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FK - Установка обезжелезивания